Year of construction: 1995, Condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Cgobeg Hr A Isvcwzzjt Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000360

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, extraction, chip blower -Manufacturer: Holzmann, mobile extraction system type ABS 2480 with connection distributor -Engine: 1.47 kW -Fan wheel: Ø 300 x 80 mm -Base: on castors Cgobowhbyzjvcwzzot -Dimensions: 840/560/H2190 mm -Weight: 64 kg

Condition: excellent (used), Circular saw Ø 100 to 550 mm, tooth pitch 10 - 40 mm, tooth height 5 to 25 mm, grinding motor 370 Watt/380 Volt, large machine stand for favourable working height, including 2 clamping cones for circular saws with bores from 15 to 85 mm Ø Cgobvcwzolyqthjzet

Condition: excellent (used), Year of construction: 1985, SAC Band Saw Cjbvcwzjwhgmmjzegt Type BW 600 Year of manufacture: 1985 Roll diameter: 600 mm APA roller guide at the top Cutting height: max. 470 mm Cutting width: max. 580 mm Saw blade length: 4600 mm Table size: 550 x 835 mm Table height: 850 mm Motor: 2 HP/1.5 kW Weight: approx. 325 kg Machine dimensions: 1040 x 670 x 2095 mm Accessories: several saw blades Location: arrives at the warehouse in 54634 Bitburg - available at short notice -

Condition: used, Motor power: 9.5 HP (7.0 kW), motor frequency: 50 Hz, chain conveyor, glue heating, pressure roller, combination trimming units, pressure beam adjustment, impact shears, glue roller, Attention: Edge feed out of function, as well as both snipping units, edge has overhang at the front and rear, which must then be worked in manually Cebvcewhb Tzjwzzsgt

Condition: used, Altec Type E2-065/3750 gluing press for precise gluing of wood panels, frames, and solid wood slats. The press ensures consistent pressure and stable joints with high repeatability. Ideal for furniture construction, interior design, and joinery, with a trolley for maximum flexibility. Press length: 3.750 mm Cobvcwowg S Uajzzjgt Press height: approx. 1,050 mm Press pressure: up to approx. 60 t

Year of construction: 1995, Condition: ready for operation (used), machine/vehicle number: 585, Brand: Hebrock Model: AKV 1000 V Machine no: 585 Year of manufacture: 1995 Tech. data: Edgeband thickness max: 3 mm Edgeband height max: 50 mm Max feed speed: 7.5 m/min With cutting knife Length of work table: 2200 mm Motor: 7 kW, 50 Hz, 230/400V, 3-phase Csboib H Slovcwzzogt Size for transport: Length: 220 cm Width: 115 cm Height: 150 cm Stock no: 2001164BXM

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine -Manufacturer: SCM, table milling machine type T 110 A with table extension -Drive: 4 kW -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm -Total weight: 550 kg Cobvowhbthecwzzegt

Condition: excellent (used), z. e.g. for driving edging and multi-blade circular saws Cobsmu Ak Tjvcwzzjgt EMZ 55 kW / 2970 rpm / B 3 / 400 V delta / 50 Hz Elektrim 30 kW / 2945 rpm / B 3 / 380 V delta / 50 Hz Motors with other power capacities also available

Condition: excellent (used), Year of construction: 1980, Used Striebig panel saw Model Standard 6220 Year of manufacture: 1980 Cutting length: 5300 mm Cutting height: 2200 mm Cutting thickness: Max. 80 mm Motor power: 4.4 kW Speed: 4750 rpm Blade diameter: 300 mm Machine length: 6300 mm Machine width: 1257 mm Machine height: 2860 mm Cgobvcwzowhglvszot Location: In stock, 54634 Bitburg - Available upon request -

Condition: used, Price: On request Industrial hoover Brand: Kiekens Cjbvcewg En Hewzzsgt Type: TURBO J7 + CAST Year built: 2008 Reference number: 008323000 Motor: Mains voltage: 400V Frequency: 50Hz Motor power: 11KW Power consumption: 7,7KW Air displacement: 910 m3/h Fuse: 32A (gl). Overall dimensions: 2540mm X 1560mm X 3200mm (LxWxH) - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), In-feeder TP Type: TP Compact planer/moulder feeder for various length up to full length, frequency-controlled gear motors. Buffer chains, one of which is adjustable for current subject length. Techn info: Feed speed 5-50m/min Buffer chains 2100mm Shortest pcs length 400mm 400 volts, 50 Hz, 3 phase Stock no: 2002144BXA Note: Cgjbvcwstt N Dpszzet some images in the ad may be on another equivalent machine

Condition: good (used), spindle moulder, spindle moulder Cgebswha Nbsvcwzzjt -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Cgsbvengz N Iecwzzjt 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Condition: excellent (used), Year of construction: 1985, Working width: 430 mm Planer block: Strip planer knives Number of knives: 4 Planing table length: 2750 mm Slotted table lips Planing table adjustment: Lever Chip removal indicator: Scale Planing stop angle adjustable: Yes Motor power: 4 kW Machine length: 2800 mm Machine width: 900 mm Cgjbvewhglcscwzzet Weight: 650 kg Location: Arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Brand: Holzma Type: Optimat HPP 82/43 Machine no: 0-240-06-4258 Year 2000 Tech. info: Saw length 4300mm Saw blade overhang 95mm Motor (main)13.5kw Scoring motor 2.2kw Cobvcjtvmrfowzzjgt Saw carriage feed 5-125m/min 4 infeeder tables with air cushions Power 19.5kw, 400volt, 3 phase 35 AMP Size for transport: A total of 4 parcels. 1, saw 6.5 x 1.2 h 2.0. 2, Beams and grips 5.1x1.0h1.0. 3, Table in front 2.4x0.8 h 2.0. 4, 1 pallet sheets 1.2 x 0.8 H 1.6 Stock no: 2002183BXM

Condition: ready for operation (used), 18 pcs. upper eccentric push-in hangers with plane-ground hanging boxes 110 mm wide suitable for gang saw ESTERER HD 30 or EHD 30, 14 pcs. lower push-in hangers 110 mm wide, 90 pcs. upper tube spacers 108 mm Ø with spring rod suspension 9 mm to 204 mm wide, 80 pcs. lower tube spacers 108 mm Ø with supports 9 mm to 204 mm wide, 70 pcs. inserts, 20 pcs. new replacement spring rods Cebvcwoigqrfjzzjgt

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Cjbvswhgd Secwzzjgt Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Cgobvjmb U A Iscwzzet Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: excellent (used), Hydraulic drive variator with motor 2.2 kW, 1430 rpm, with planetary reduction gear for speed reduction, electric adjustment via worm gear motor Csbvcwzolxzimezsgt

Condition: excellent (used), Year of construction: 1986, TECHNICAL DATA: - Maximum planing width: 530 mm - Maximum planing height: 240 mm - Number of knives: 4 - Motor power: 5.5 kW Cgjbvswhf N Tscwzzjt - Electric thicknessing table adjustment - Feed speed: 2 speeds - Infeed roller - Low-pressure bar - 4-knife planer block - Strip planer knives - Outfeed roller - 2 sliding rollers in the table MACHINE DIMENSIONS: - Length: 990 mm - Width: 930 mm - Height: 1080 mm - Weight: approx. 630 kg Location: arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: ready for operation (used), Year of construction: 2001, CNC twin table ERGON CNC Maskin SCM Type:Ergon Serie no:AA1/012348 Year:2001 CNC machine SCM ERGON Program NUM PC, and CAD ALIPA CAM 2 work tables simultaneoulsy or single work 2 tool magazin/too lchange each 12 holders 2 electro spindles each 11 kw, 18000rpm who can work in pair (DUOSET) independence Z axe stroke Cgebvcon Hx Tlowzzst Tool holder HSK-63 1 drillbox 18 spindles Toolchange magazin 2x12 places Angular head Manual/instruction, pneumatic, electric diagram in severaL languages on CD Technical info: Control, program NUM-PC, CAD Alpha CAM Axis stroke X-Y-Z 4500-1740x-300mm Work tables 2 pcs each 2160x1520mm electyro spindles/routers DUOSET 2x11kw, 18000rpmwho can work in pair Vertical stroke of 2 independent Z axis Syncron electronic floating head 2 carousel toolholders for change each 12 pcs HSK 63 cone Vector axe Vacuumpump 90m3/h F18-drillbox 18 spindles Power 400 volt, 50 Hz, 3 phase Dimension set up approx:7460x5500mm X-x Weight 7000 kg Stock no:2001650BXA Price: 200000 SEK

Year of construction: 2008, Condition: good (used), Model:Easy 2000D Serie n0:08216/02 År:2008 Spraying automat Cefla model D for applying paint to boards and other flat workpieces. The machine with dry filter has 2 holders for spray guns. "Back spray" also enables the application of color on edges. The endless band allows for leftover color to be recycled. The main parts of the machine: Equipment for air ventilation Cgsbvcspz H Tdswzzet Air cleaning system System for supply and distribution of paint Drive systems for guns Endless conveyor belt Electronic control system Easy sprayer provides: High quality of painted objects, paint that does not hit the workpiece is recycled High production speed High utilization rate of color Techn info Easy 2000/D Control system ED-EASY2000 w/d Max work width including the edges 1300mm Max workpice thickness 70mm Air flow inlet ventilator/fan10000m3/h, 3 kw Air flow outlet ventilator/fan 2000m3/h, motor 7,5kw Feeding carpet speed 1,6-10,6m/min Airpressure holder endless belt  3bar Airpressure consumption 50Nl/min Airpressure feeding pump 6 bar Airpressure spray guns 1-4bar Holder spraygun Motor for operation of spray guns 2 kw Speed spray gun 120m/min Power:400 volt, 50 Hz, 3 phase, totalt17,1 kw, 40 A Maximun engine power 7,5 kw, 15,6 A Totalt17,1 kw Dimension:4840x3708x2900mm (lxwxh) Stock no:2001807BXM Note:In reservation for wrong technical info presented

Condition: ready for operation (used), Brand: Randek Type: SP700 Machines and equipment included: Powered roller conveyor Size: 4650x1460 mm Hydraulic lifting table Size: 3470x1470 mm Feed roller conveyor to the saw Cobvcwjrtp Htezzjgt Size: 4000x400 mm Cutting saw Randek Size: 1000x1700x2100 mm Out-feeder roller conveyor with length stops Size: 5600x400 mm Hydraulic press Size: 1350x1500 mm Jacking cutter Randek Size: 1000x1500 mm Length of the entire saw line approx.: 17.5 meters P.s The cut-off saw's program and motor control of the saw blade do not work. Stock no: 2002038BXM

Condition: ready for operation (used), Brand: SCM Model: P-230-S Feeder: Mahros Type: Ben200 8 spindle planer SCM with feeder Mahros, safety curtain and spare parts. Tech. info: Capacity: Max working width 230mm Max working height 120mm Spindles in order: below (4 kW, 5.5 hp), right (5.5 kW, 7.5 hp), left (7.5 kW, 10 hp), right (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), left (5.5 kW, 7.5 hp), above (7.5 kW, 10 hp), below (7.5 kW, 10 hp) Spindle diameter 40mm Max. diameter of tools that can be mounted under the work table: 190 mm Cgjbjtpm S Ejvcwzzst Variable feed speed 10-50m/min Cardan driven with pneumatic pressure on feed wheel Feed motor power: 4.4/5.5 kW Motor power for raising/lowering: 0.55 kW (0.75 hp) Brake in the engines Elecricity: 400 volts, 3 phase, 50 Hz Machine dimensions: Length: 5900 mm Width: 1800 mm Height: 1600 mm Size for transport: 590x210x160 cm Stock no: 2002064BXA