Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Dkebjipx Aiju Rwcuol Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Year of construction: 1995, Condition: good (used), UV putty roller Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7250 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Working pressure max: 6 bar Motor: 400V, 50 Hz, 3-phase Dkobu Rwsg E Uf Secuel Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000353

Year of construction: 2012, Condition: good (used), Brand: MC Model: LI-2DISC Machine no: 125/12 Year: 2012 Dkebujpbcaij Rwcusl Tech data: Working width: 1090mm Dimensions of rolls: 1050x70mm Roller speed: 40-650rpm Speed: 0-13m/min Motor: 5kw, 50Hz, 400V, 3-phase Motor for rollers: 0.75Kw, 50Hz, 400V Machine dimension (lxwxh): 2200x1600x2100 Weight: 1280Kg Stock no: 2001696

Year of construction: 2001, Condition: like new (used), Roller coater Brand:Sorbini Type:T/20-MF No:MR1RFF21488 Year:2001 The T20 roller coater has been designed as an addition to SORBINI´S extended line of products. The machine is used for finishing flat boards in general with various types of coating products (e.g.polyurethane, polyester, acrylic and water-based finishes) The modular design makes it possible to obtain a wide range of applications which cater for all specific user requirements. Techn info: Working width max 1300mm Thickness of workpiece 0-80mm Feeding speed 3-20 m/min Feeding motor0,737kw Doctor roller motor 0,75kw Applicator roller motor 0,75kw Doctor roller diameter 174mm Applicator roller diameter 248mm Working hight 80 till 950mm Compressed air requirements 6 bar 9l/min Air pump pressure 2-10bar Air pump capacity at max pressure 30l/min of 10 bar Dkebu Rjfw Nc Ujwcuel Dimension 950x2550x1450mm (lengthxwidthxhight) Total weight 1220Kg Stock no:104326BXA

Condition: like new (used), Brand:Waco Type:KS300 Dksbu Reh Ek N Aswcujl Complete cutting line Waco with 3 electropneumatic lengtstopper in and out feeding conveyor 3+2meter Techn info: Max saw balde 400mm Max cutting hight 70mm Motor 5,5kw, 400 volt, 50 Hz, 3 phase Electropneumatisc control of saw blade and length stopper, Stock no:2000596 Size for transport: Saw 120x105x215cm (lxwxh) Conveyors:300x80x35cm Total weightt:350 Kg

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Nailing machine Brand: LG Machine (Swedish) Year: 2002 Assembly nailing machine full automatick, high cpacity, stacking output. Normal wear, chains and sprockets changed a couple of years ago Techn info: Dsbu Rwcjua A T Asuokl Capacity pallet 800x1200mm approx. 600/day Dimensions of finished pallet Min-max: 60x80mm, 120x160mm Thickness of boards: 16,19,22,25mm Width of wood plank min-max 70-150mm Number of nail pipes 6, mechanical Loose nail dimension 80, 90 mm Saw machine (4 saw blades) for cutting the corners Total dimension/set up approx: 15x7m Price: ask for offer

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Djbu Rweq Ehpajcuokl Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Djbujth R Tle Rwcuokl Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Dobu Rwcsrbyrpsuokl Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: ready for operation (used), Year of construction: 1986, Brand: Hansen & Hundebol Model: 300/AUT1000 Year model: 1986 Tech. info: Working width: 1040 mm Max brushing height: 100 mm Work table length: 1720 mm Dkoberfxr Hju Rwcuel Brushing roller: diameter: 180 mm Shaft length: 255 mm Shaft diameter: 33 mm Manual adjustment of work table Main motor: 4 kW, 50 Hz, 380V, 3-phase Stock no: 2001993

Condition: ready for operation (used), Brand: Bacci Model: Brevettata SM 787 Djbu Rwetu Ivnecuekl The work table can be tilted and is adjustable in height. Motor: 2.2 kW, 50 Hz, 380 V, 3-phase Size for transport: 160x120x145 cm (lxwxh) Weight: 800 kg Stock no: 2002057

Condition: like new (used), Year of construction: 2022, Brand: Salvamac Model: Classic 50/Salvastop 5.4m Year model: 2022 Tech data Fast cutting saw: Output path 4+2m Blade diameter: 500mm Spindle rotation speed: 2800v/min Table height: 900mm Cutting time adjustable from the outside of the machine The movement of the blade is pneumatic Air pressure: 6-8bar Variable setting of blade speed Engine: 5.5 Kw (7.5 HP) Debotxmnqju Rwcuokl Tech data Salvastop: Working length 5.4m total length 6m Arm/pusher 600x200x100mm Capacity up to 100 kg Servo drive motor 11 Nm Current 230 volts 50 Hz 1 phase Salvamac Trolleybag 2: Powerful chip extractor built from galvanized sheet. Collection bag in PVC diam 500mm and 2x1250x500 mm filters in Cotton. Steel fan blade The machine is wheeled. Tech data: Collection bag 2 pcs diameter 500mm Filter 2 pcs diam.500mm H=1200mm 3 Hk (2.2Kw) 400V 3-phase Start/stop unit with motor protection mounted on the motor cover Instos 200 mm in diam Airflow 2950m3/h Size: 1730x580x2460 Wheel wonder Stock no: 2002123

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Djbevwkrgeu Rwcuokl Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Stock no: 2002414BXM

Condition: ready for operation (used), Year of construction: 1975, Cutting saw Randek Model: 1-5-S Machine no: 431 Year of manufacture: 1975 Tech. info: Blade diam: 700mm Debujldg Skj Rwcuekl Rotating blade in degrees In and out feeder: 4 m in, 5 m out Stock no: 2001525BXM

Condition: ready for operation (used), Year of construction: 1983, Brand: Morbidelli Model: M35/A Year: 1983 Debu Rjmv Ehaswcuekl Tech data: Spindle speed: 2800rpm Number of spindles: 35 pcs Max distance between outer spindle center: 1088mm Spindle center distance: 32mm Drilling depth: 70mm Engine: 3+3 HP Working pressure: 6-7 atm Weight: 650 kg Machine size: 1600x100x160mm CM Weight 650Kg Stock no: 2001582BXA

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Dkjbu Rjq H Spvswcuol Max 6 bar Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: ready for operation (used), Year of construction: 2006, Description of the product Brand: Costa Model: TRITT1350 Serial no: A60314LL1 Year of manufacture: 2006 Stock number: 2002440BXA Technical data Working width: 1350 mm Sanding belt size:1380x2620mm Power:400volt, 50 Hz, 3 phase, 51kw, 101AMP 1. sanding unit 1 sanding belt sectioned Dkjbuev Hfdvj Rwcuol 2. Sanding unit 2 sectioned sanding shoe 3. sanding unit 3 sectioned sanding shoe 4. cleaning brush 5. blast cleaning 6. Vacuum Motor: 51 kW Size for transport: 320x240x265 cm (lxwxh)

Condition: ready for operation (used), Year of construction: 1983, Brand: Weinig Model: U 17 A Machine no: 1387-2940 Year of manufacture: 1983 Working height: 1700 mm Working width: 1200 mm 7 spindles in order: Below (4 kW, 5.5 hp), Right (4 kW, 5.5 hp), Left (5.5 kW, 7 hp), Right (4 kW, 5.5 hp), Above (5.5 kW, 7 hp), Under (4 kW, 5.5 hp), Universal (5.5 kW, 7 hp) 40 mm spindles Tiltable feeding-unit Variable feed speed: 6-36 m/min Switch for the security fence Infeed path for planer Brand: Sacot Length: 4000 mm Width: 200 mm Dobu Rwjvydwzscujkl Output table Length: 3500 mm Width: 200 mm Lifting table Length: 2350 mm Width: 1200 mm Stock no: 2002037BXM

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: AKV 88 D Machine no: 569-P3 Year model: 2005 Tech data: Max edging thickness: approx. 3mm Max working height: 50mm Inner radius min: approx. 8mm Feed speed 0-7 m/min Warm-up time: approx. 6.5 min Motor: 9.3Kw, 50Hz, 400V Dsbujq Ihxps Rwcujkl Machine size (lxwxh): 1360x690x1220mm Weight: approx. 150Kg Stock no: 2001921BXA

Condition: good (used), Brand: Striebig Model: Econom 520 6 E/G Machine no: 43941 Tech data: Horizontal saw length: 4250mm Vertical saw length: 2350mm Max sawing depth: 85mm Blade diameter: 300mm Motor: 3Kw, 50Hz, 400V, 3-phase Djbuerh Dado Rwcuskl Stock no: 2001739

Condition: ready for operation (used), Brand: Ayen Model: DB 1000 B23 Pneumatically controlled drilling machine Tech. info: Max opening: 820 mm Working width: 720 mm Dkobu Rwceri R H Esusl Drilling depth: Horizontal 120 mm, vertical 80 mm Motor: 2,2 kW, 50 Hz, 380 V, 2800 RPM, 3-phase Machine size: 120x80x205 cm (lxwxh) Weight: 275 kg Stock no: 2001012

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Dobu Rwcovwku Uoujkl Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Djbetk It Ssu Rwcuokl Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Djbu Rwsu Racxscujkl Stock no: 2002311BXA

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: Dkobev Hw Hcju Rwcusl - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM