Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm Dkob Ha Rsryyhcj Iwsl with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: used, Year of construction: 2017, machine/vehicle number: 1271, max. Anleimerstärke : 2 mm min. Werkstückdicke : 10 mm max. Werkstückdicke : 40 mm min. Werkstücklänge : 180 mm Vorschubgeschwindigkeit : 7 m/min Aufheizzeit : 4 min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Dia-Wechselplatten-Fräser Verstellung des Einlauflineals : manuell Kappschere bis : 2 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar mit Auslaufkanal Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Flachziehklinge : Ja, tastend Stk Aggregatenanzeige : am Display Steuerungsart : SPS Streckensteuerung Dkjb Ha R Ievniu Uowol Bedienung : Touch-Screen Motorleistung : 7,4 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Gewicht ca. : 750 kg Absaugdurchmesser : 140 mm Laufmeter : ca. 7900

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent Deb Hjlht Hwea R Iwekl F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: used, Year of construction: 2020, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 160 mm Workpiece width min: 60 mm Feedrate max: 10 m/min Electromotoric height adjustment: Yes Spraying device: Yes Dob Howcdg Hea R Iwokl Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 4.930 mm Control: HOLZ-HER EDGECONTROL TOUCH PPC 319

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 0-202-21-6404, -Technical specifications of the KFL 526 - Continuously adjustable feed rate 15-40 m/min (optionally up to 50 m/min) - Up to 40 m/min for thin edges up to 0.6 mm - Up to 30 m/min for thick edges up to 3 mm - Fixed workpiece overhang 30 mm - Workpiece thickness 12-40 mm - Working height to the top of the chain 950 mm - Working width double-sided min. 220 mm to max. 2500 mm - Workpiece length in front of the cam max. 1200 mm - Edge material roll 0.3-3 mm - Max. edge cross-section for PVC 135 mm², for veneer 100 mm² Dkeb Howgl Ndsa R Iwjl - Roll diameter max. 830 mm - Pneumatic connection 7-8 bar + PROFI TBL100/25/20 (HOMAG feeding and Stacking) - Technical Specifications - 3-compartment pallet magazine - No machine stop during pallet changes - Infinite stacking patterns possible - Data connection to the edge processing system - Automatic return after the first pass - Semi-automated (1 machine operator required) - Workpiece length min. 250 mm to max. 2500 mm for TBL 10025/.. - Workpiece width min. 220 mm to max. 2000 mm for TBL100/ /20 - Roller diameter 64 mm - Roller guide approx. 120 mm - Feed rate continuously adjustable 7-40 m/min - Working height 950 mm +/- 50 mm - Pneumatic connection 7-8 bar

Condition: ready for operation (used), Year of construction: 1997, Edgebander OLIMPIC mod. NOVA 4 Minimum working width 80x300 Minimum working length 150x120 Panel thickness 10-60 mm Dkjb Ha Rswg R Iro Iwel

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Dobjkwhp Eo Ha R Iwokl Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2008, Additional Equipment 2 x joint milling machines Gluing unit with 2-way edge magazine Dsb Ha R Iewbw D Nswekl Trimming unit Flush milling // Fine milling Copy milling (4 motors) Profile scraper // Surface scraper Buffing Sanding unit (straight) // 2 x sanding units (radius) 2 x grooving units Workpiece return This edgebander was manufactured in 2008. It features a gluing unit with a 2-way edge magazine, trimming unit, flush milling, fine milling, and copy milling with 4 motors. Additional capabilities include profile and surface scraping, buffing, and both straight and radius sanding units. Ideal for comprehensive edge banding and finishing tasks. Contact us for more information about this machine. Application Types Edge Banding

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. Dob Holht Hzoa R Iwokl max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: used, Year of construction: 1994, operating hours: 5,373 h, Functionality: fully functional, machine/vehicle number: M/6176, total length: 9,000 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,000 kg, Edgebander Operating hours: 05373.33 h (read) Processing units: Upper pressure line KAM 4-2 01 Rapid heating tank KAM 4-61-02.01 Lower pressure line KAM 4-1-01 Edge feeding table KAM 4-4-01 Automatic Magazine for solid edges and foils Debswf U E So Ha R Iwskl Feed roller KAM K4-51-01 KAM travelling foil shear Cutting device model type K 17 Fixed milling machine KAM 4-50-00 model type NF 30.1 Fine milling machine KAM 4-26-80 Slot milling machine KAM 4-32-01 Rounding corners Grinding device Scraper unit Oscillating edge cleaning unit KE-0 Dimensions: approx. 9,000 x 1,400 x 2,000 mm Weight: approx. 4,000 kg

Year of construction: 2023, Condition: new, Compact, Invisible Joints and PUR Processing – All as Standard Features Within a compact space the ARTEA series offers top equipment with an unrivaled price/benefit ratio. Jointing, gluing parts, corner rounding as well as a complete finishing area with radius scraper, flat scraper, buffer and sprayer all within a space of only 3,700 mm. Consistently Good Connections Highly flexible adhesive application with Glu Jet thin film technology for invisible joints using EVA or PUR glue. For Waterproof Connections You can process PUR glue just as easily as EVA glue. Effortless Cleaning The easy-to-clean glue system is a great added value for you right from the start. Clearly Arranged, High Performance Large 15.6" touchscreen with VISE (Visual Setting) – Your digital logbook for quick and reliable setup with any settings. Visual Setting Graphical display of all settings for digital counters and pressure gages to help you avoid setting errors Glue Database The glue database allows you to save up to four different types of glue and then simply call them as required. Temperature, glue quantity and machine parameters are always available at the touch of a button. Glue Application You can process practical glue cartridges and quickly and easily change over between EVA and PUR as required. With the Glu Jet, all you need to do to process granulated adhesive is change the glue chute. Control: Industrial PC with 15.6" touchscreen Edge Feeder: For coiled edging or edging strips with single feeder Joints: Cutter dia.: 50mm Glue Application :Glu Jet with thin film technology Granule and/or cartridge chute Pressure Unit :2 pressure rollers, first roller driven Cutting: Single motor, with linear guide Dob Ha Rspmtcgs Iwskl Milling: Multifunction, flush 5mm / R2mm Corner Rounding Single motor, with linear guide, 45 mm Radius Scraper Mechanical incl. chip collection box Flat Scraper: Application-controlled Packing dimensions: 3120x770x1800 Weight netto (kg): 700 Feed speed (m/min): 9 Minimum workpiece length (mm): 180/210 Minimum workpiece thickness (mm): 8-50 Edge thickness (mm): 5

Condition: used, Year of construction: 2013, Used machine Year of construction: 2013 Machine number: 133 Machine has been completely overhauled new Glue Jet 301 glue system (upper part 1 mm) all units checked all cutters sharpened all knives changed - electrics for infinitely variable feed 400 V / 50 Hz, 2.2 KW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - infeed guide 1350 mm, motorized adjustment - Joint trimming unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 trimming units for joining the panel edge. - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for jointing trimming unit 1801 / 1802 - Fully automatic edge feeding unit 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) -Storage chute for granulate - Printing unit 1913 MOT Dkjb Ha Rjrp It To Iwel - Cutting unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise rotation - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise rotation - Shaping cutter unit 1833 MOT4 - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise rotation with CM technology - Scraper unit 1929 MOT2 - HW inserts for scraper holder R = 2.5 mm (2 pcs. required) - Surface scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) Availability: short term Location: Hochheim Hochheim

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 2364 kg Main Drive Number of axis 4 Additional Equipment Infeed fence adjustment with servo motor Pneumatically adjustable pre-milling unit // Pneumatically controlled pressure zone // Pneumatically adjustable end trimming saws Edge gluing unit with pre-heating device Radius trimming unit, top and bottom, adjustable by servo motor // Radius scraper R2, pneumatically adjustable Corner rounding unit with 2 motors, pneumatically adjustable Surface scraper Polishing brushes Hot air blower // HOT-AIR system Glue injection system at the front and rear of the panel STARTOUCH control system // STARTOUCH control system General Data Machine weight 2364 kg Main Drive Number of axis 4 Additional Equipment Infeed fence adjustment with servo motor Pneumatically adjustable pre-milling unit // Pneumatically controlled pressure zone // Pneumatically adjustable end trimming saws Edge gluing unit with pre-heating device Radius trimming unit, top and bottom, adjustable by servo motor // Radius scraper R2, pneumatically adjustable Corner rounding unit with 2 motors, pneumatically adjustable Surface scraper Polishing brushes Hot air blower // HOT-AIR system Glue injection system at the front and rear of the panel STARTOUCH control system // STARTOUCH control system This SCM Olimpic K800 edgebander was manufactured in 2011. Ideal for precise edge finishing, it supports a variety of banding materials. Durable and reliable, it's a great addition to any woodworking shop. Contact us for more information. Application Types Edge Banding Dkob Ha R Iewct Awjwjl

Condition: new, Year of construction: 2025, The Hebrock F 2 Dob Haoi Am U Do R Iwjkl The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Year of construction: 2008, Condition: ready for operation (used), Year of production: 2008 Condition: the machine is in good condition, can be put immediately into work. It can be inspected during operation. Technical specifications: • Panel thickness: 6-60 mm • Workpiece width: min. 60 mm • Workpiece length: min. 180 mm • Feed rate: 10-30 m/min Equipment units/ Aggregats:ú • Sprayer unit • Pre-milling unit (2 motors) • Pressure unit (1 pieces driven, 3 pieces free rollers) o motorized positioning o pneumatical scheduling • End-trimming unit (2 motors) • Flush Cutting Unit • Multifunctional trimming unit (motorized adjustment) • Corner copying unit (motorized adjustment) • Scraper unit – Radius (motorized adjustment) • Scraper unit- Surface • Sprayer unit (cleaning) • Buffing unit Other technical parameters: • Motorizes pressure bridge adjustment • With glue application system (cartridges or granules) • Pull-out workpiece support – extremely stable (1770 mm) • Pneumatically rising/ lowering safety cover (door) • PC control - programmable Djb Hspm Hitea R Iwekl • Machine length: 7890 mm

Condition: used, Year of construction: 2010, Used machine Edge banding machine, right-hand version Year of manufacture 2010 Equipment and technical data: max. edge thickness 3 mm with preparation for exchange tank min./max. Workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. Min. workpiece length 190 mm Min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control (incl. touchscreen) Glue pot with contact roller Dkeb Ha R Iouhirbewsl Pressure zone Cutting shears Cutting saw Combination milling unit flush/bevel/radius pneumatically adjustable Corner copying unit Surface scraper, short version Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Dkjb Ha R Iohqadcjwsl Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Compact and flexible in the smallest of spaces. Workpieces get their finish on a length of only 2.13 m. Equipped with a 1.1 KW high-frequency motor joining unit and diamond-tipped spiral jointing cutter, Teflon-coated gluing unit, pre-capping unit and HF multifunctional trimming unit 2 free spaces for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5 color touch screen. Technical data Machine length 2122 mm Workpiece thickness 10- 45 mm Dksb Heu Swadea R Iwsl Workpiece width min approx. 120 mm Edge thickness 0.4 - 2.0 mm Max. edge height = workpiece height + 4 mm (2+2) Electrical connection 230 V Total connection 3.6 kW Feed speed 6.5 m/min. Pneumatic connection 6 bar Net weight approx. 490 kg Options: Surface scraper unit Diamanmat tools height = 45 mm Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 Dkjbei Am Uko Ha R Iwjl With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2011, Used machine Year of construction : 2011 Condition : Function tested with new PPC-panel Glue thickness max mm : 6 Gluing height max mm : 60 Roll material thickness max mm : 3 Workpiece length min mm : 160 Workpiece width min mm : 65 Dobsu D Ttqo Ha R Iwjkl Feed rate max m/min : 10 Glue system cartridge : Yes Glue system granulate : Yes Suitable for PUR glue : Yes Joint trimming unit : Yes Cross-cut saw unit : 2 motors Flush/radius/bevel stations : 1 Corner copying unit : 1 motor Scraper unit : Profile and flat Strip magazine : Yes Cycled units : NC axis(es) Design : Left-hand machine 1903 : Yes 1827 MOT4 : Yes 1832 : Yes 1929 MOT2 : Yes Control and software - HOLZ-HER EDGECONTROL CE mark : Yes Declaration of conformity : Yes Total connection kW : 7,60 L x W x H 4630 x 1411 x 1698 mm Weight approx. kg : 1,235 Location: Hochheim Availability : short term

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Dkjbji Anado Ha R Iwol Location: ex stock 54634 Bitburg Available in calendar weeks: 4/2024

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW Dkeb Ha Rjtq Nlrj Iwol 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: excellent (used), Year of construction: 1999, Running direction of the panel : from operator to left max. glue thickness : 5 mm min. Workpiece thickness : 10 mm min. Workpiece width : 90 mm feed speed : 10 m/min Heating time : 5 min Automatic roll magazine : Yes cross-cut shears up to : 0.2 - 3.0 mm autom. gluing : glue pot with granulate on top cross-cut saw : rigid 90 Dksb Haorutcye R Iwsl Combination trimming unit : Yes unit display : display type of control : manual Operation : Selector switch/push buttons Protective hood : Yes Chassis : yes Dimensions : 2800 x 1400 x 1400 mm Weight approx. : 550 kg Location : Comes to stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads Dkjbevzc Ris Ha R Iwjl MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Control with LCD display, pivoting control panel, program memory, manual pressure bridge adjustment, feed by means of transport chain, extendable workpiece support, joining milling unit 1961 2 x 2.0 kW diamond joining milling cutters in parallel and counter-rotating motion, edge magazine 1903 support plate 820 mm, max. loading capacity 40 mm automatic feeding of rolls and strips glue application system 1906 cartridge system with tactile nozzle, Dkjbov Aqybe Ha R Iwjl with automatic reloading use of PUR adhesives possible, printing unit 1816 with driven roller, pneumatic control of the printing unit cutting unit 1918 2 x 0.22 kW pivoting from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2 for flush / radius and chamfer milling motor-adjustable Blow nozzle on the milling unit, Corner copying unit 1832 Corner copying up to 3 mm radius, postforming up to r = 6 mm Radius scraper unit 1929 Plastic edges up to 3 mm Chip catcher box for radius scraper, insert-controlled surface scraper 1964 Blow nozzle on the surface scraper Buffing unit 1940 Spray device for separating and cleaning agent application complete ----- Technical data ----- Edge thickness of rolled goods: 3 mm, Edge thickness of strip goods: 5 mm Max. edge thickness for corner copying: 3 mm, Workpiece thickness: 6/45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8 m/min, Distance between workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cutting knife for rolled goods up to: 3 mm, Heating time: 3.5 min, Power of jointing cutter: 2 x 2 kW, Power of crosscut saw: 2 x 0.22 kW, Power of milling station: 2 x 0.6 kW, Power of corner copying: 0.22 kW, Extraction nozzle of jointing milling unit: 120 mm, Extraction nozzle of milling unit: 70 mm, Extraction nozzle of scraper unit: 70 mm, Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm, Weight: 1,200 kg Availability: short term Location: Flörsheim