Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 986003, grinding wheel speed: 6,000 rpm, tool diameter: 230 mm, travel distance X-axis: 325 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 470 mm, TECHNICAL DETAILS max. gear ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Tooth width max.: 58 mm Control: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm B-axis: +90.1° / -1° Spindle Grinding spindle speeds: continuously variable up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tool Csbu Rb Nsv Rcn Hedegt Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions water tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal: 2.5 x 1.1 x 0.8 m/ 0.25 t EQUIPMENT - Coolant filter system Hoffmann HSF 100 V

Condition: used, Year of construction: 2002, Functionality: fully functional, wheel diameter: 130 mm, workpiece height (max.): 170 mm, module thread tooth pitch (max.): 3, module thread tooth pitch (min.): 0.5, TECHNICAL DETAILS Control: Sinumerik 840D Tip diameter: 80 mm Toothed length: 170 mm Overall length of hob cutter: 245 mm Collet diameter: 32 mm Tool speed: 300 - 3000 rpm Gear diameter: max. 130 mm Gear width: 170 mm Module: 0.5 - 3 Slide travel radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece table: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Cjbu Rbov I Tmus Ndsgt Space requirement: approx. 7.64 x 3.14 x 3.25 m

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 291127, wheel diameter: 275 mm, wheel width: 55 mm, controller manufacturer: Siemens, controller model: 840 C, module thread tooth pitch (max.): 6.5, module thread tooth pitch (min.): 1.5, Face Milling - Single Part Process - Continuous Process: - The workpiece and tool (usually Spiron) rotate simultaneously, and all teeth are machined simultaneously in a single operation. - The cutter head has multiple cutter groups (not arranged in a circle) - Parallel tooth height - Conical tooth tip surface Single Part Process: - The workpiece is stationary, and the tool (usually Arcon) rotates and cuts a tooth by plunging the tool. - Once a tooth is cut, the tool moves back out of the tooth, the workpiece continues to cut by one tooth width, and the next tooth is cut until all teeth are finished. - The cutter head has all cutters arranged on a circular path. - Conical tooth height - Parallel tooth tip surface The C28 can handle both gear and pinion. Cgsbu Rb Nov I Ud Iodst For the single part process, a C28 must be "prepared" - i.e., a direct measuring system + part gear brake, workpiece axis + license file for manufacturing single part processes. TECHNICAL DETAILS Control: Siemens 840 C Wheel diameter: max. 275 mm Wheel width: 55 mm Module: 1.5 - 6.5 Helix angle: 0-60° Number of teeth: 6-120 mm Gear ratio: 1:10 - 1:1 Cutter head radius: 62 - 110 mm Number of knife groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2400 rpm Ratio X / Y / Z: 3:1 Spindle pitch per axis: 10 mm Movement range E / V-axis: -5° to 95° / ±7.5° Motor speed E / V-axis: 400 / 900 rpm Travel E/V-axis: 1800 / 1098 °/min E/V-axis gear ratio: 80:1 / 1:1 A/B-axis mounting diameter: 130 / 140 mm A/B-axis spindle speed: 667 / 345 rpm Permissible A/B-axis motor speed: 10,000 / 4,500 rpm A/B-axis gear ratio: 15:1 / 13:1 V1-axis travel: 85 - 225 mm V1-axis travel speed: 6 m/min V1-axis motor speed: 1800 rpm V1-axis spindle pitch: 5 mm U-axis travel: 112 - 258 mm U-axis travel speed: 0.6 m/min U-axis gear ratio: 4.3:1 U-axis motor speed: 3000 rpm U-axis spindle pitch: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 mm Power requirements: 3 x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Condition: ready for operation (used), Gear hobbing machine vertical with counterholder Cobuev Ic Tko Rb Ndegt Pfauter RS II With accessories

Condition: used, Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm max. module 3 min. module 1 workpiece dia. 150 mm number of teeth 5-150 max. helix angle +- 40 ° workpiece weight max. 2 kg spindle turning speed - stepless 0 - 5200 U/min tip circle diameter 10-145 mm root circle diameter ca. 10-145 mm 0 100 mm clamping length max. 350 mm weight of the machine ca. ca. 8,5 t Features/Accessories: - Revolving turret with 2 workpiece spindles and dressing unit - counterholder Cgebu Rbjvwd Sts Ndot - 3 workpiece clamping devices - Centering device with sensor - Hoffmann filter system - 1 Flange with grinding wheel - Kuka robot - Safety devices for transportation - Documentation

Condition: ready for operation (used), Manufacturer MODUL Model ZFTKK 500/2 W Condition Used Tilting of hob spindle 0....8 gradi Hob spindle speed 45-224 giri/min Max workable diameter 540 mm Maximum module 16 Max tooth range 78 mm Range no. teeth 6....100 Machine weight 12000 Kg *Roughing and finishing machine* Cjbu Rov Rpq Iob Ndjgt

Condition: used, Year of construction: 1999, Technical details: Cgebuevkpugs Rb Ndot max. wheel diameter: 280 mm max. module: 7 weight of the machine ca.: 13 t table turning speeds: 100 U/min table diameter: 250 mm min. number of teeth: 4 hob turning speeds: 1500 U/min max. hob diameter: 160 cutter length max.: 230 mm Machine in good condition. Available 01.08.2024 *

Condition: excellent (used), Year of construction: 2005, Gleason 275G Technical Data Machine Specifications Machine Type: Bevel Gear Grinding Machine Control System: Fanuc CNC (specific model may vary, e.g., Fanuc Series 16i/18i/21i) Year of Manufacture: 2005 (or similar era) Workpiece Diameter: Up to 275 mm (10.8 inches) Max Module: Typically up to 8 mm (depending on gear geometry) Grinding Wheel Diameter: Up to 250 mm (9.8 inches) Axis Configuration: X-axis: Radial motion Y-axis: Tilt motion Z-axis: Vertical motion A-axis: Rotary table (workpiece rotation) B-axis: Wheelhead swivel C-axis: Wheelhead rotation Positioning Accuracy: Typically within ±0.001 mm (±0.00004 inches) Repeatability: ±0.0005 mm (±0.00002 inches) Grinding Wheel Specifications Wheel Speed: Up to 30,000 RPM (depending on wheel size and material) Wheel Mounting: Hydraulic or mechanical clamping Wheel Dressing: Automatic dressing system (integrated into CNC) CNC System (Fanuc Control) Control Model: Fanuc Series 16i/18i/21i (typical for 2005) Programming: G-code and custom Gleason-specific macros Interface: LCD display with manual data input (MDI) and graphical interface Data Storage: Floppy disk, CF card, or RS-232 interface (depending on configuration) Software: Gleason-specific software for gear grinding calculations and simulations Power Requirements Voltage: 400V/480V, 3-phase Power Consumption: Approximately 20-30 kW (depending on operation) Compressed Air: Required for clamping and cooling (typically 6 bar) Cgsbu Rovy T A Tob Ndet Coolant System Coolant Type: Water-soluble oil or synthetic coolant Flow Rate: Adjustable, typically 50-100 liters per minute Filtration: Integrated filtration system for chip and debris removal Dimensions and Weight Machine Footprint: Approximately 3.5 x 2.5 meters (11.5 x 8.2 feet) Machine Weight: Approximately 8,000-10,000 kg (17,600-22,000 lbs) Applications Gear Types: Spiral bevel gears, hypoid gears, and other complex gear geometries Industries: Automotive, aerospace, heavy machinery, and precision engineering Additional Notes The Gleason 275G with Fanuc control is designed for high-precision grinding and is capable of handling both small and medium-sized gear production. The Fanuc control system provides flexibility in programming and automation, making it suitable for both batch production and custom gear manufacturing. Maintenance and calibration are critical for maintaining the machine's precision, especially given its age (2005). For more specific details, refer to the operator's manual or technical documentation provided by Gleason or Fanuc. If you need further assistance, contact Gleason or a certified technician familiar with this machine.

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, inner diameter: 250 mm, module thread tooth pitch (max.): 8, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Cjbu Rbsvdtx Ne Ndogt Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: ready for operation (used), Functionality: fully functional, Kapp model AST 203 Cgsbu Rb Nov Ic N Ejdjt Hob sharpening machine

Condition: used, Year of construction: 1984, max. wheel diameter 1500 mm gear width 700 mm max. module 5 Control Liebherr LH90 smallest number of teeth to be hobbed 6 milling head: Motorfräskopf milling spindle speeds (infinitely variable) 44 - 440 U/min milling head -swivable +/- 45 ° table diameter 1100 mm max. table load 8000 kg Cgobujvvcgtj Rb Ndjt total power requirement 66 kVA Equipment / Accessories: - chip extraction device - milling arbors - documentation

Condition: used, Year of construction: 1988, wheel width: 300 mm, wheel diameter: 150 mm, Gear hobbing machine, workpiece collet holder Cgebu Rbsq Aa R Dj Ndot

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Cgjbu Rev N Hilsb Ndst Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: like new (used), Year of construction: 1977, max gear diameter 745,5 mm - max radial setting 266,7 mm - pitch-coarsest 16,9 mod - full dept max 31,8 mm - max face width 116,8 mm - index range 5-80 inclusive - diameter of taper hole at large end 152,4 mm - taper per foot 19,0 mm - depth of taper 152,4 mm - diameter of hol through spindle 127,0 mm - cutter diameter 9, 12, 16 and 18 inches - max offset above center 114,3 mm Cebu Rjkl E Ufsb Ndjgt - max offset bellow center 114,3 mm - max machine center to spindle nose 596,9 mm - cutter speeds 19-167 stepless - feeds infinitely variable from 7 s per tooth minimum - dimensions 4600x3000x2800 mm - Weight: 24000 kg

Condition: good (used), total power requirement 0,94 kW weight of the machine ca. 0,680 t Cgsbevwd Saju Rb Ndot dimensions of the machine ca. 0,720 x 0,765 x 1,445 m

Condition: ready for operation (used), Gear hobbing machine horizontal Pfauter P160 Cgjbu Rb Nov Hulpsdjt With accessories

Condition: used, Year of construction: 2002, max. wheel diameter 125 mm max. module 3 max. width of spur-gears 24 mm Control SINUMERIK 840 D table diameter 145 mm table hole 80 mm rotary table speeds infinitely variable 0,03 - 50 U/min Distance of shafts -25 bis +180 mm pivoting angle 12 Grad ical angle 45 ° number of strokes (double strokes) 1.500 - 3.000 DH/min work spindle speeds min./max. U/min stroke position adjustment 70 mm Cebu Rbevxwx No Ndogt length of stroke min./max. 0 - 30 mm work-spindle diameter 85 mm taper of shaper cutter HSK 80 B power capacity 7,5 kW total power requirement 30 KVA weight of the machine ca. 8 t dimensions of the machine ca. 4,3 x 2,8 x 2,9 m Tool: number of teeth = 1 - 200 module min. 0.05 Workpiece: number of teeth = 1 - 1500 module min. 0.05 Counter holder rotatable with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: used, Year of construction: 2000, Technical details: length: 700-1.100 mm Cobu Rborp Nupe Ndsgt diameter: 40-160 mm dimensions of the machine ca.: 1,7 x 0,9 x 2,2 m Automatic shaft measuring device for measuring: Lengths, diameters, distances, chain dimensions, groove widths, groove diameters, angles, concentricity, etc. *

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Machine still under power and production can be seen at any time. The technical data is added as an image. Cjbu Rb Nju N E Rredjgt

Condition: ready for operation (used), Gear hobbing machine Cgsbov Huliju Rb Ndet Pfauter P 400 With change gears and milling cutters

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm Cgebu Rbovxwpuo Ndjt distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Own lapping system! Was also operated at a lapping center

Condition: excellent (used), Year of construction: 2004, technische Daten Raddurchmesser - max. 20-145 mm Cebu Rbekwc Tfj Ndsgt Radbreite 40-45 mm Modul - max. 3,5 Modul - min. 1,25 Arbeitsraum Schwenkbereich des schabradkopfes: -23/+90 Grad Konizitätsverstellung (b-Achse) +2/-2 max. Grad Horizontalverstellung (verfahren der X achse): 160 mm Schwenkstellung des Drehtisches (e-Achse): +/- 20 mm Eingabefreiheit (alle NC- Ahsen): 0.001 mm/grad Zustellschlitten bewegungsbereich(verfahren Z Achse): 300 mm Eingabefreiheit: 0.001 mm Werkzeug Außendurchmesser: 230/256 min/max mm Bohrungsdurchmesser: 63,5/ 100 mm Breite des Werkzegpaketes: 50,8-0,2 mm Werkstück Außendurchmesser: 20-145 min/max mm Modul: 1,25-3,5 min/max mm Verzahnungsbreit: 40-4 max mm Drehzahlen und Vorschübe Werkzeugdrehzahl (stufenlos einstellbar): 600 max. 1/min Werkstückdrehzahl (bearbeiten) 3000 max. 1/min Werkstückdrehzahl (schleudern): 4500 max. 1/min Vorschubgeschwindigkeiten Eingang/ Vorschub A-richtung: 3,3 max. U/min B-richtung: 0,5 max. U/min C0-Achse 60 max. U/min X-Richtung 10-10.000 min./max. mm/min Z-Richtung 10-10.000 min./max. mm/min Gewicht der Maschine: 5600 kg

Condition: used, Year of construction: 2007, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm tooth width max. 58 mm diameter of tools min 69,85 mm diameter of tools max. 230 mm x-axis 325 mm Cebu Rb Njvxwnqjdogt y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control 160 i - MB FANUC total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system "pinion shaft"

Condition: used, Year of construction: 2002, max. wheel diameter 125 mm max. module 3 max. width of spur-gears 24 mm Control SINUMERIK 840 D table diameter 145 mm table hole 80 mm rotary table speeds infinitely variable 0,03 - 50 U/min Distance of shafts -25 bis +180 mm pivoting angle 12 Grad ical angle 45 ° number of strokes (double strokes) 1.500 - 3.000 DH/min work spindle speeds min./max. U/min stroke position adjustment 70 mm length of stroke min./max. 0 - 30 mm work-spindle diameter 85 mm taper of shaper cutter HSK 80 B power capacity 7,5 kW total power requirement 30 KVA weight of the machine ca. 8 t dimensions of the machine ca. 4,3 x 2,8 x 2,9 m Tool: number of teeth = 1 - 200 module min. 0.05 Workpiece: number of teeth = 1 - 1500 module min. 0.05 Cobu Rbjvxwhdo Ndsgt Counter holder rotatable with 4 positions automatic workpiece changing device Linear workpiece conveyor

Condition: used, Year of construction: 2005, ratio of transmission 10:1 min. number of teeth 3 max. number of teeth 200 range of tooth size 20 mm diameter of tools min 69,85 mm tooth width max. 58 mm diameter of tools max. 230 mm x-axis 325 mm y-axis 350 mm z-axis 470 mm work piece table - Ø 212,71 mm b-axis + 90,1 / - 1 ° Control SIN 840 D SIEMENS Cgebovxwgmeu Rb Ndet total power requirement 75 kW weight of the machine ca. 10.000 Kg dimensions of the machine ca. 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available