Used hydraulic presses double column / four column presses for sale (236)

Condition: good (used), Year of construction: 1989, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Iodpfxsd E U Nnj Acljif Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Isdpfxsdzqpto Acloif Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 1993, Force: 100 tons Max. distance between columns: 1400mm Stroke: 250 mm Windows: 400mm Daylight: 400mm Table: 1250x1100mm Ram: 1250x1100mm Speed fast down: 400mm/sec. fast uo: 330mm/sec. work: 24-43 mm/sec. Power: 33kW Weight: 10.000 kilos Height: 3300mm Width: 1700mm Ijdpfx Acsc Uwx Dolsif Depth: 1800mm 2-Hand operation Cutting dampers

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Iisdpfx Acev Srfwslof Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Iisdpof A R Uhofx Aclof Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, distance between stands: 1,350 mm, installation height: 600 mm, TECHNICAL DETAILS Press force: 250 t Frame width: 1,350 mm Stroke: 400 mm Installation height: 600 mm Table dimensions: 1,250 x 800 mm Side clearance: 640 mm Table height: 800 mm MACHINE DETAILS Ijdpszk E A Ajfx Acleif Dimensions & Weight Approximate space requirement: 3,600 x 2,800 x 5,700 mm Approximate machine weight: 36,000 kg

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. Iisdpfxsgtty Te Aclof With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Iisdpfsgy Hzpox Aclef Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke Iodew A Amrepfx Acljif - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: new, Year of construction: 2025, H-FRAME DOUBLE-ACTING HYDRAULIC PRESS MODEL HDD 400 / 400 TON Ram Cylinder Capacity (ton): 400 ton Min. Working Pressure (bar): 30 bar Max. Working Pressure (bar): 250 bar Main Cylinder Diameter: Ø 420 mm * 1 pc Auxiliary Cylinder Diameter: Ø100*60 mm * 2 pcs Table Size (mm): 1500 x 1200 mm Iiodpfxewbtn Rs Aclef Stroke (mm): 1000 mm Daylight (mm): 1400 mm Advance Speed (mm/sec): 1400 mm/sec Return Speed (mm/sec): 200 mm/sec Working Speed (mm/sec): 2–12 mm/sec Cushion Capacity (ton): 200 ton Cushion Stroke (mm): 400 mm Ejector Force (ton): 10 ton Ejector Stroke (mm): 300 mm Motor (kW): 37 kW Pump (cc): 100 cc Overall Dimensions (LxWxH): 2550 x 3500 x 6100 mm Weight (kg): Approx. 26,000 kg

Condition: refurbished (used), Pressure: 150t Ijdsgd H Tpspfx Acljif Length of Stroke: 140mm Table size: 510x530mm

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm Iisdpfoihf R Uex Acljf TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Condition: refurbished (used), Year of construction: 2020, pressing force: 500 t, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Isdpeffamvefx Acloif Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. Iedjy Uiyvepfx Acljif The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = hydr. punching and embossing press Accessories: tool changing table - with cutting shock absorption Iisdpfxstqqlce Aclef damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch Iisdpfx Acefxyh Aolof dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Isdpfxsg S R Twe Acleif rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: used, MULLER 250t PRESSURE: 250t STROKE: 550mm Iiedorfxhkopfx Aclef TABLE DIMENSIONS: 2500x1400mm

Condition: new, machine/vehicle number: DF0279, pressing force: 1,000 t, pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm Iodpjfxyiysfx Acleif pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 6538, functionality: fully functional, operating hours: 20,242 h, pressing force: 163 t, stroke length: 500 mm, retraction force: 22 t, overall weight: 25,000 kg, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Iijdoxgt Tzepfx Aclef Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Year of construction: 1974, condition: used, Pressure: 340 T Iodpfxj Du Uwo Aclsif Length of stroke: 200 mm Down table size: 100x800 mm Distance between up-down: - open 510mm (daylight) - closed 310mm New hydraulic and electric systems

Condition: new, Year of construction: 2024, Double-column press, 250 tons (3000 kN) at 245 bar Stroke: 1000 mm Installation height: 1200 mm Ijdpfx Askw Rbdocljif Ram plate: 1400 mm x 1200 mm Table plate: 1400 mm x 1200 mm Complete Rexroth hydraulics Siemens PLC Approach speed: 170 mm/sec Pressing phase: 8 - 15 mm Return stroke: 150 mm Return speed: 110 mm/sec Main motor: 30 kW Example image

Condition: new, pressing force: 100 t, pressure:100 t passage width:700 mm stroke:450 mm weight of the machine ca.:6 t dimensions:ca. 3000 x 1210 x 3100 mm return capacity:10 t :22 kW Max Working height:850 mm :1 - 100 mm speed of return flow:1 - 100 mm/sec :1 - 10 mm/sec. pestle plate:1090 x 600 mm table plate:1090 x 600 mm positioning accuracy:0,1 mm table height over floor:800 mm :300 l Oil cooling (electric):1,5 kW (max) ejector:d=100 mm ejector stroke:210 mm pressure of ejector:100 t no. of ejector pins:1 Stück Monitor WEG:15 Zoll :2.000,-- ? :2.400,-- ? :3.000,-- ? :2.400,-- ? Iedpjfxyhqefx Aclsif :5.800,-- ?

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Isdpfx Acoy Nbtkoleif Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features Isdpfx Ajx N T H Ajcljif CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.