Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Year of manufacture: 2015 - workshop tested Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for Feln Sjvc A U Dji T Togb jig-like threads - Lead screw change by means of quick coupling - Safety device against tool breakage - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 4 Basic Condition: New machine Spindle speed (infinitely variable): Range A 120 - 2.500 rpm range B 60 - 1.250 rpm normal drilling capacity: 40 mm standard equipped with: - stepless drill feed - thread cutting device - infinitely variable speed control - handle cross switch - digital display for speed, feed and drilling depth - chip breaking function - operating instructions with the following options: Fgjln Sijci Su Do T Tob - Free cutting device

Year of construction: 1985, Condition: refurbished (used), Cup grinding machine Make: GMN Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 with warranty Accessories: - Grinding wheel Ø 200 with flange - Dressing diamond - lateral dresser Foln Sijgayvqj T Tegb - magnetic clamping plate 250 x 150 mm (pole pitch: 2 mm) - wet grinding device - instruction manual - used, as seen -

Condition: new, Drill grinding machine Make: MOTOM Model: BSM 13 DUO Grinding range 2-13 mm Paintwork gray Areas of application: Grinding cone shell Sharpening relief grinding Fsln Si Tjguadno Togb Scope of delivery: CBN grinding wheel for HSS tools Pliers set from 2-13 mm increasing by 1.0 Plexiglas protective shield

Condition: reconditioned (used), Steel grinding machine Make REMA Model DS 07/ST version with pole-changing motor 0,22/0,37 kW 1450/2900 rpm year of manufacture unknown Ma.-No. 022857 Equipment: - Reversing switch right/left rotation - column design with chip tray - Wet grinding device - 2 pcs. support table ATS (left) inclinable from -5° to +15 and with spring rockers Fgsln Sishvu Tmo T Tjb - 2 pcs. angular stops - adjustable support table ATK (right) for grinding chip grooves - steel holder for support table ATK 360° rotatable, swiveling, with height adjustment and knurled screw for adjustment of chip depth - enlarged protective hood (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - protective hood (right) for grinding wheels Ø 125 mm with mounting flange - Operating instructions used as seen, without warranty

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° Fgjlnem Nbwto Si T Teb tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1986, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 86-5751 with guarantee Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange Fgoloqctnion Si T Tsb - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate Used as seen The machine is technically compliant with the state of the art at the time of manufacture.

Year of construction: 1982, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) Fgsln Si Tspn Rgve Teb - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 Fgelnstdnb Ee Si T Tob - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: new, Surface grinding machine Fgoln Sisd Rhpqs T Tjb Make METALLKRAFT Model FSM 2550 Condition: New machine with warranty Technical Data: Table size(magnetic plate): 250 x 500mm Maximum grinding surface: 265 x 540mm Maximum distance spindle-table: 500mm Pitch handwheel for Z-axis: 0,02mm (5mm per revolution) Automatic feed Z-axis: 0,5 - 20mm Handwheel pitch for Y-axis: 0.01mm (2mm per revolution) Spindle speed: 2900rpm Motor power spindle: 1,5 kW / 400V Motor power hydraulic unit: 0,75 kW / 400V feed speed X-axis: 5 - 25m/min Motor power cross feed (Z): 0,15 kW / 400V Speed rapid traverse Y-axis: 250mm/min Maximum grinding wheel diameter: 205 x 20 x 31,7mm Dimensions: 2250 x 1400 x 1800mm Weight: 1350,00kg(net) Standard equipment: solid and stress relieved machine body made of grey cast iron X- and Z-axis with V- and flat guideways and high quality Turcite-B guideways Spindle with class P4 tapered roller bearing guarantee a concentricity of 2μ Manual adjustment in all axes by means of large handwheels with vernier electromagnetic clamping plate including automatic demagnetization function automatic, motorized feed in the transverse axis(Z) regulation of the feed in the Z-axis via two potentiometers (coarse feed / fine feed) End position determination in the Z-axis via adjustable end stops automatic, hydraulic feed in the longitudinal axis(X) with adjustable stroke Regulation of the feed speed

Year of construction: 1976, Condition: reconditioned (used), Universal tool milling machine Make: DECKEL Model: FP 1 Year of construction: 1976 - workshop tested Machine no.: 53426/08 geometric acceptance with test report Accessories: - 3-axis digital display Heidenhain ND 750 Foln Sijflc N As T Togb - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Condition: new, Year of construction: 2021, Precision center lathe and feed spindle lathe Make: OPTIMUM Model: OPTiturn TZ 4 Item no.: 3432240 Condition: New machine Center height: 200 mm Center width: 800 mm Speed: 45 - 1,800 rpm (16 steps) equipped as standard with - 3-axis digital readout DPA 32 Fgoln Siogqw U Rj T Tjb - MK 3 fixed center point - quick-change toolholder size B - BD turning tool holder - Reducing sleeve MK 6 / MK 3 - Fixed steady rest ø 10 - 130 mm - Moving steady rest ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine lamp - Operating tool

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Fgjln Si Tsg R S Rce Tsb Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-2520 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display Fsljhtq Edsn Si T Tjgb HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Fgeln Sijmhfrro T Teb Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: new, Year of construction: 2023, Light metal circular sawing machine Make: METALLKRAFT Model: LMS 400 SET Year of manufacture: 2023 - Demonstration machine Machine no.: 1301222 Warranty: 6 months single shift equipped as standard with: - Machine base - 500 mm cross-cut fence - Carbide saw blade 400 x 3.8 x 32 mm, Z96 - operating tool - Operating instructions Fslertpu Ejn Si T Togb additionally equipped with: - Minimum quantity lubrication system MD 11 - Attachment of minimum quantity lubrication system

Condition: reconditioned (used), Year of construction: 1989, Precision cutting machine Make: DEGEN Model: TAM 18/600 Year of manufacture: 1989 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / Mach. No.: 054 with guarantee geometric acceptance with test report Fgjln Si Tovc Ayaj Tob Accessories: - cup grinding wheel with edge hardening - cutting wheel - coolant system - operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 - partially overhauled, newly painted, Foln Si Tjvdrx Ue Tegb RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 410016 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 320 contouring control - HEIDENHAIN HR 410 electronic handwheel - attachment kit for TS 220 probe head with taper on the control panel and spindle lock - fixed table 650 x 375 (T-slot: 14 mm) - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - rope left window of the spike protection cabin removable, electrically secured - control panel on the substructure - operating instructions used as seen The machine corresponds technically to the standard of the year of manufacture.

Condition: new, Deburring machine Make: Assfalg Model: FS 5 Condition: new machine Speed: 2,800 rpm Max. chamfer width: 3 mm Equipped as standard with: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating instructions Fsleb E Dc Hjn Si T Togb

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2101-1067 Milling head type: 2171 Milling head number: 1086 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X and Z axis - Fixed table 600 x 200 (T-slot: 12 mm) Fgelnschfyfo Si T Teb - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1995, Surface grinding machine Make Geibel & Hotz Model FS 40 Compact Year of manufacture: 1995 - partially overhauled, newly painted, RAL 7035 light gray / RAL 7012 basalt gray Machine no. 9200895 with guarantee Accessories: Foln Sisd Rl Nqs T Tjgb - Electro-magnetic clamping plate 400 x 200 mm (pole pitch: 5 mm) - Wet grinding device - Automatic vertical feed with digital display for vertical and transverse movement - Fine feed on the transverse path handwheel - Grinding wheel with flange - Central lubrication device - Hand lever dressing device with dressing diamond - Transverse speed control, infinitely variable - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1983, Universal tool milling machine Make: DECKEL Model: FP 2 Active Year of manufacture: 1983 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2202-10799 Foljfzk Hfon Si T Tjgb Milling head type: 2271 Milling head number: 300-1406 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: new, Universal milling machine Make: OPTimill Model: MT 60 Item no.: 3336090 Condition: New machine Travels: - X-axis 750 mm - Y-axis 230 mm - Z-axis 360 mm equipped as standard with Fgsln Ssg Anfnji T Tsb - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - B 18 drill chuck holder - Gear rim drill chuck 3-16 mm / B 18 - Reducing sleeve MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - T-nuts - Coolant device - LED lamp - Operating tool - Operating instructions

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Mach. no.: 344349 Guarantee: 6 months geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel Fjln Siohikrrj T Tegb - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating instructions - Used as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Fgslshy Tdyon Si T Tob Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.