Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) Fpolowgan Uon T Akusg 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: excellent (used), Year of construction: 1999, CNC Control: MSD-501II (FANUC 18i-T) X-axis mm: 210 Z-axis mm: 550 Y-axis mm: - Maximum Turning Diameter mm: 250 C-axis Increment: 0.001 Maximum Turning Length: 500 Cutting Feed mm / min X, Z, Y: - Travel over Bed mm: Ø Travel over Carriage mm: Ø Bar Pitch mm: Ø 51 Max Rapid Traverse m / min X,Z: 18.24 Main Spindle 6" Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Feln T Akjwf E Ansuspg Spindle Bore: - Main Spindle Nose A2-6 Sub-Spindle Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Sub-Spindle Bore mm 41 Sub-Spindle Nose A2-5 Turret Positions 12 Number of Live Tool Stations 12 Live Tool Speed rpm: 3,000 Live Tool Power kW: 5.5 EQUIPMENT Chip Extractor Bar Loader 10-65 Bar Loader Interface Manuals Included Basic Fixed Tool Holder Equipment 1 x Axial and 1 x Radial Power Tools

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Fpjln T Aowgd I Eekusg Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Year of construction: 1988, Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace Fjlnevrivaj T Akujpg -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 -Usable space: 400/420/H390 mm -Heating power: 10 kW -Nominal temperature: 1340°C -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg

Condition: excellent (used), Fasti hand guillotine shears type 505 - 10 - 2 1060 x 2.0 mm Fpjlswgylasn T Akuog

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Fpeln Tovxtkzs Akujg Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm Fsln T Akjwgagdoujpg spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 Control Unit Brand FANUC Model 21i MB Main Drive Spindle speed range 80 - 12000 Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Fpsln T Akjwhr Hfjueg Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Max weight 8 kg Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2022, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW Fpjln Towgd Ixj Akuog

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm Fsln Tskw H D Rj Akujpg -Translation via: Gears -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg

Condition: like new (used), Year of construction: 2009, Metal circular saw Berg + Schmid VKS 370 HA 2 built in 2009 with stop + roller conveyor 2 cutting speeds 30 + 60 rpm Fpoln T Aowgykpjkuog

Condition: used, Year of construction: 2007, suction capacity: 3,300 m³/h, negative pressure: 3,500 Pa, Dust extraction, welding fume extraction by Keller. For collecting and separating dust, such as fine particles of metal oxides and fumes generated in thermal processes such as joining, separation or surface treatment using laser, plasma or gases. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, soda blasting, grinding plaster, cement, plastics and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 5.5 kW. Capacity 3300 m3/h Negative pressure 3500 Pa Inlet diameter - 400 mm Electrical documentation included. Dimensions of the device: height - 3.30 m Fpeln T Aovxt Elekuog total width - 1.35m x 1.15m stock number: 0953

Condition: used, Year of construction: 1992, Suitable for measuring milling and drilling tools of all kinds, profiles, punching tools, drive and cardan shafts, profile rolls rollers etc. Accessories: Measuring table adjustment stepless via joystick in all three levels, Program control Multi Ticount 2000 with digital display, Curtain to darken the screen, Fpelnewf I Ndj T Akusg 2 tailstocks, 14 mounts. screen diameter: 1000 mm enlargement: 10, 25 and 50 times table load: about 200 kg table adjustment: X axis Table adjustment across X-axis: 350 mm Stage adjustment focusing axis Z-axis: 200 mm Table height adjustment Y-axis: 200 mm Swivel range of the upper table approx: +/- 20° Connected load: 230 V/50 Hz Dimensions approx.: 4000 x 2150 x 2100 mm Weight approx: 1500 kg colour: beige

Condition: used, Chamber kiln has the following dimensions: Length 2800 Fsln Tjwgkqae Akuopg Depth 1800 Height 3000 Max. 500° Fully functional

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Fpelswgd Iren T Akueg Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Fpjlnsq Tvqvj T Akujg -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 sets of interchangeable jaws available -Price: per set -Total dimensions: 80/78/H78 mm / 78/78/H75 mm -Total weight: 2.5 kg/set

Year of construction: 2008, Condition: ready for operation (used), Control Unit Brand SIEMENS Main Drive Number of axis 3 This 3-axis Index MC 400 horizontal turning machine was manufactured in 2008. Ideal for precision turning operations, it offers robust construction and reliable performance. If you are looking to get high-quality turning capabilities consider the Index MC 400 machine we have for sale. Contact us for more information about this machine. Application Types Turning Feln Tjwiad Uo Akujpg

Condition: excellent (used), Coolant mixer Emulsion mixer Nimatec Stock number (28599) Fsln T Akswf Ht Ijuopg 1/2-inch water supply connection

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders Fjln T Akowgch Dsuopg - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table load: 10,000 kg, table length: 3,000 mm, tool mount: 50 mm, CNC bed milling machine Manufacturer Zayer Type KF3000 Year of manufacture 1990 Control Heidenhain TNC 415 Fpelovmbhken T Akujg Clamping surface 3000 x 1000mm Travel paths X/Y/Z 2700/1250/1000 Table load 10,000kg Tool holder SK50 The machine is in good used condition

Condition: used, Year of construction: 2022, tank 1.300 l Fslewgd Ilen T Akuspg Pressure of pump 8 / 20 / 80 bar total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: excellent (used), Vice Brand Röhm Fpsln T Aewf Hp Nokueg Stock Number (28609) Type 744-05 Jaw Width 200 mm

Condition: good (used), Year of construction: 2002, Universal - travelling column - milling machine Manufacturer Kekeisen Type UFX 4000/20 Year of manufacture 2002 Control Heidenhain TNC530 Fpjlnsvmbd Ej T Akueg Travel paths X/Y/Z 4000/1200/2000 C axis 360° Clamping surface 4200 x 1800mm Universal milling head with 2 swivel axes 2 gear stages 20 - 960rpm 960 - 4000rpm Tool holder SK50 30-way tool changer Installation dimensions 6400 x 2900 x 4400mm Service and spare parts from F + B Laupheim no problem.

Condition: excellent (used), Clamping Tools Stock Number (28621) Clamping Forks, Clamping Blocks for M 20 Screws Fjln T Akswf Hnxsuopg Weight approx. 49 kg

Condition: excellent (used), Three-D Probe Folswf Hl Dsn T Akujpg Analog Stock Number (28619) Manufacturer: Garant Type 359520 Shaft Diameter 16 mm Shaft Length 40 mm Reading Accuracy 0.01 mm Length, including probe tip: 174 mm