Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Equipment: Dkobu Tsv Ev Tljbq Ejl -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Year of construction: 2002, Condition: used, Working widths 1800 mm roll surface width 2000 mm Number of rollers 2 St./ea Upper roll Gravur oder Stahl dia diameter of upper rolls 210 mm Heating - upper roll Elektro Lower roll Gummiert dia diameter of lower rolls 300 mm Dkobuet An E Rs Tbq Eol Roller covering - soft rubber 95 °Sh weight 2 t dimensions of the machine ca. 3,0 x 1,5 x 1,8 m Embossing Calender with exchangeable top roll, The following spare rollers are included with the machine: • 1 x steel roll, chrome plated • 3 x engraving rolls, various designs • 1 x spare bottom roll - rubber coated On the outlet side there is a small batch - rising batch winder ATTENION: the electrical control unit is defective, still needs to be replaced, therefore SPECIAL PRICE for self-repair

Condition: excellent (used), Year of construction: 2017, Clamping force: 360 t Screw diameter: 50 mm Shot weight: 428 g Distance between tie bars V: 820 mm Distance between tie bars H: 820 mm Shot volume: 471 cm3 Type: Horizontal Drive: Hybrid Djbusvygy Se Tbq Eokl Core pullers: 1+1

Condition: good (used), Year of construction: 2006, operating hours: 62,149 h, Functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,615 bar, total length: 6,800 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 12,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, injection moulding machine ENGELVictory 1050-220 TECH warehouse no.: 503559 manufacturer: ENGEL type: Victory 1050-220 TECH controller: CC100 year of construction: 2006 operation hours: 62149 h technical data clamping unit clamping force: 2200 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1045 mm opening stroke: 755 mm ejector stroke: 180 mm ejector force: 80 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1615 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 230 min plasticising rate: 55 g/s PS injection rate into the open: 255 g/s PS number of heating zones: 5 nozzle stroke: 350 mm measures & weight measures of machine l x w x h: 6.8m x 1.8m x 2.4m total weight: 12900KG equipment included screen text german machine incl. Handling Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI 61 Dobusv Hw Tvj Tbq Eskl

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger - Suitable for powder and granulate Dkebu Tbjrvxn Ijq Eel - Screw diameter: 35 mm

Condition: used, Twin screw extruder 34mm diameter Dkjbu Tbqjv U Nnuo Eel 400 volts, 128 amps 2 pairs of spare screws Used for powder coatings Hourly output 250-400 kg depending on the product

Condition: ready for operation (used), Year of construction: 1998, Injection Unit Screw diameter 40 mm Stroke volume 231 cm³ Injection pressure 1855 bars Clamping Unit Clamping force 125 tons This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information. Application Types Injection Moulding Dkobjv Ht Ezou Tbq Eol

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Dobu Tbqov U Da Ss Ejkl Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2003, Condition: good (used), Motan 80 with three hoppers with a capacity of 50 liters. Dkjbujvg A Uro Tbq Eol Year of manufacture 2003.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, For sale is a complete glass bonding machine for components measuring 4m x 3.5m. See the pictures for more details. The system can be viewed in operation by appointment. Dismantling by the customer. Dkebuewbcy Ao Tbq Ejl System availability: Immediately

Condition: excellent (used), Year of construction: 2007, operating hours: 68,000 h, Functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 1,600 bar, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,300 kg, Equipment: documentation/manual, injection moulding machine ENGEL Victory 330-120 Tech warehouse no.: 503558 manufacturer: ENGEL type: Victory 330-120 Tech controller: CC100 year of construction: 2007 operation hours: 68000 h technical data clamping unit clamping force: 1200 kN size of mould plates h x v: 740 x 470 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm Dkjbusv Hp S Rj Tbq Esl weight of mould: 825 kg technical data injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar screw length: 20 l/d screw stroke: 160 mm screw speed: 400 min injection rate into the open: 151 g/s PS number of heating zones: 4 nozzle stroke: 250 mm measures & weight measures of machine l x w x h: 5.1m x 1.5m x 2.1m total weight: 7300KG equipment included screen text german Anti vibration mounts technical data robot-system handling type: Linear manufacture: ENGEL controller: ER-HLI41VC year of construction: 2007

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Dkebusv Uzq Uj Tbq Eol Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included Injection Unit Screw diameter 80 mm Shot weight 1212 cm³ Stroke volume 1212 cm³ Injection pressure 1877 bars Dkjbu Tbjv Ht Ngjq Eol Clamping Unit Clamping force 420 kN Ejector stroke 230 mm Additional Equipment SEPRO Robot Included This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2007, Condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Dkjbu Tswal H Njbq Esl

Condition: excellent (used), Year of construction: 2016, Clamping force: 190 t Screw diameter: 40 mm Ejector stroke: 130 mm Distance between tie bars V: 520 mm Djbu Tov Rmpzobq Ejkl Distance between tie bars H: 570 mm Type: Horizontal Drive: Hydraulic Injection material : 30% glass , 70% polyamide Video of

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Vacuum Forming Machine with: Bush vacuum pump Typ: RA 0255 D 561 CUXX Servo Plug Assist Clamping frame lifted parallel Servo Form table Siemens S7 control 8 Cooling fans Technical specifications Max. Plate size: 2250x1250 mm Max. Forming area: 2200x1200 mm Max. Thickness of the panel: 10 mm Max. Drawing height: 700 mm Max. Tool height: 860 mm Only 2.640 Working hours The machine has an automatic changeover function, upper punch with pneumatic drive, mould table with pneumatic drive and position storage. Electric heating, individual heating pattern is stored, energy-saving mode during work breaks by switching off the vacuum pump and lowering the set temperature of the radiant heaters. Temperature control connection for top and bottom Under-tension frame (max. 140 °C); Heating molding machine variants:- 8-position switch Forming table with pneumatic drive, Forming table speed digital adjustable (7 levels); Top table Dkobjv Uzfleu Tbq Eol - with pneumatic drive; - Synchronization device for asymmetrical Burden; - automatic top table tool clamping - automatic conversion - Speed digitally adjustable (7-stage via valve cascade); - Top table can be used as a demoulding aid 8-way cooling fan Additional double fan in the front center (1 motor with fan mounted on both sides without nozzle), Air shower cooling - connection for upper clamping frame; Include this complete set of Frames. All frames with substructure and base plate. Some with cooling possible valued in approx 40.000 euros 1740 x 700 1960 x 1060 2040 x 735 1270 x 960 860 x 860 2260 x 1070 1720 x 350

Condition: good (used), Year of construction: 2005, operating hours: 76,679 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,450 bar, total length: 4,050 mm, total width: 1,930 mm, total height: 2,100 mm, overall weight: 5,200 kg, Equipment: documentation/manual, injection moulding machine ENGELVictory 200-80 Tech warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC 100 year of construction: 2005 operation hours: 76988 h technical data clamping unit clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 675 kg Dksbu Tsv Hpufsbq Esl technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar screw length: 20 l/d screw stroke: 140 mm plasticising rate: 17 g/s PS injection rate into the open: 150 g/s PS number of heating zones: 4 nozzle stroke: 200 mm measures & weight measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg

Condition: used, operating hours: 15,000 h, Functionality: fully functional, machine/vehicle number: Model 0408, pressing force: 150 t, this is a mould clamp for Polyurethane RRIM moulding, top and bottomPlatens tilt 35 degrees each, Platens open gap for mould is 2040mm, Platens closed gap is 650mm Platen size is Dsbuswgkr Ds Tbq Ejkl

Condition: ready for operation (used), Year of construction: 1997, Injection Unit Screw diameter 40 mm Stroke volume 40 mm Injection pressure 2402 bars Clamping Unit Clamping force 200 tons Ejector stroke 180 mm Additional Equipment SEPRO ROBOT INCLUDED Dsbu Tbev Ht E Ijq Ejkl This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. It's a robust option for efficient plastic processing tasks. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Dkebewa S Uaou Tbq Eol Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Condition: excellent (used), Year of construction: 2017, Clamping force: 230 t Screw diameter: 50 mm Dkjbu Tsv Rminjbq Eel Distance between tie bars V: 620 mm Distance between tie bars H: 620 mm Type: Horizontal Drive: Hydraulic Machine dimension - L-6,22 m , W-1,73 m , H - 2,30 m Machine weight - 12,6 tons Injection material - 50% glass 50% polyamide

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, Functionality: fully functional, clamping force: 280 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,065 bar, total length: 3,200 mm, total width: 1,350 mm, total height: 1,850 mm, overall weight: 2,900 kg, Equipment: documentation/manual, injection moulding machine ENGEL Victory 200-28 Tech warehouse no.: 503562 manufacturer: ENGEL type: Victory 200-28 Tech controller: CC200 year of construction: 2011 technical data clamping unit clamping force: 280 kN size of mould plates h x v: 500 x 400 mm min. mould height: 150 mm max. open daylight: 550 mm opening stroke: 400 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 450 kg technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar screw length: 17 l/d screw stroke: 140 mm screw speed: 480 min injection rate into the open: 78 g/s PS number of heating zones: 4 nozzle stroke: 230 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2.1m total weight: 2900KG equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor LxW: 2800mm x 350mm Discharge height: 950mm Speed: 9m/min machine incl. Handling machine incl. water flow regulator Anti vibration mounts interface for ejector plates safety interface for temperature control units Dksbu Tbqev Hpn Es Eel Schuko-socket 10A selection unit technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 electric cabinet dimensions: 1,00m x 0,35m x 0,64m

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, Functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Djbujwgkhro Tbq Ejkl

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Dkjbuowa S Imj Tbq Eel Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: used, Year of construction: 2006, Clamping force: 80 ton Screw dia: 40mm Dsbu Tsuy Sdtsbq Eskl Weight 3400 kg Machine used for Bakelite production (DUROPLAST)