Condition: like new (used), Year of construction: 2021, Functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 180 mm, feed length X-axis: 3,200 mm, The KP 900 EasyCut cut-off saw is a suitable solution for companies that process solid wood and place maximum emphasis on the quality and yield of their production. It is used to cut out defects and optimize lengths. On average, up to 900 bm/hour can be processed on this saw. (for material with a length of 4 m with 8 cuts). The saw can be operated by one or two workers, depending on the nature of the processed material. The optimization saw KP 900 EasyCut is suitable for production, which is focused on cutting accuracy, minimization of cargo waste, speed but also safety of work. The advantage of the machine is a high degree of flexibility in the input and output dimensions of the processed material. Controlling the saw is intuitive and special software facilitates programming and entering cutting parameters. KP 900 EasyCut has extended mechanization options at the output. Device functions Length optimization The function consists in minimizing waste and maximizing the yield of the assortment. The inserted material is optically scanned by the binder and automatically precisely laid out on the cross-section of the specified lengths of the selected program. The optimization system then always prioritizes the cut of the longest specified length that fits into the inserted material. The saw automatically measures the length of each inserted piece, so it is not necessary to sort the material in advance by size. In the case of marked defects, the material is optically divided into individual pieces by the binder (from defect to defect) and these pieces are again separately optimized for length. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Feb Hev Iz Rnedqccegb Qualitative optimization - waste The essence of this function is that the operator performs a visual assessment of the cut piece and marks with two perpendicular lines the places with defects that must be cut out with special chalk. By moving the binder with special optics over the cut material, the current positions (chalk strokes) of the necessary cuts are recorded. The resulting parts in different lengths (from defect to defect) are automatically length-optimized and cut to the required lengths using the software according to the cutting program. If the cut part does not meet the length of the smallest length in the program, it goes to waste. Automatic front and back cropping can be set in the selected program. Solid and massive construction with a robust cover of the cutting area guarantees high work safety. Quality of individual components, material and processing ensures trouble-free operation of the equipment and a long service life in demanding working conditions. Material flow In the basic design, the saw is LEFT oriented, i.e. material flow is from right to left. Automatic loading system is a combination of sophisticated printing equipment and optics. The system is an integral part of the entrance table. It moves along a precise linear rail with bearings and ensures very precise positioning of the workpiece in the cut (up to ±0.1 mm). Thanks to the optical integrated system, the loader reads the length of the material, marked defects and quality. Clear touch 15" display

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, saw band length: 6,200 mm, saw band width: 120 mm, cutting width (max.): 850 mm, table length: 4,500 mm, cutting length (max.): 3,600 mm, worktable length: 4,000 mm, saw drive: 3,000 W, Mebor Band saw HTZ 1000. With log deck and left and right sorting after the saw. Has been working 1,5 years. Log max diameter 850 mm. For logs 2100 - 3600 mm in lenght. Together with 10 sharpened bands. Fjbev Hblvo Hdqccjgb

Condition: good (used), Year of construction: 1996, Functionality: fully functional, cutting height (max.): 75 mm, cutting width (max.): 1,200 mm, saw blade diameter: 400 mm, Slitting and cross-cutting saw well maintained in good condition Year of production 1996 GOMAD Poland from the new we are the only owner on the equipment of the unit with the undercutting slab and an additional guide for cutting at an angle, up-and-down blade and tilting at an angle up to 45 degrees DTR documentation. Technical data Undercutter on a separate motor 0.75 kw Tilting at an angle 0 45 ' Side carriage Upper shield on the arm Polish manufacturer Gomad Massive stable strong construction Extension and extension tables Cutting width on the right side 120 cm Main saw motor 6 kW, 2880 rpm RPM of undercutting saw 8500 rpm Swing of the saw 0-45° max. bore diameter of main saw f 30 mm max. blade diameter 400mm Undercut saw bore diameter f 22 mm Fgob Hdqcju Axf Necsb

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 0-240-06-7004, The machine will be available from August 1st, 2025. It is currently still in operation, but can be inspected at any time. It has been regularly serviced and many wearing parts have been replaced. Fgob Hdqcjv Evvtecsb For more information about the saw, please send us an inquiry.

Condition: good (used), Year of construction: 1986, Scoring unit - kW Fob Hdqcjuunupscegb Dimensions (L/W/H) mm machine weight ab. 900 kg Rear feed width mm Cutting length 5300 mm Motor output 4,6 kW Cutting height 2200 mm

Condition: new, Year of construction: 2023, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t Feb Hdqcjvn U Uascjgb The pictures are only for orientation and illustration of the KSY model in a different size.

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer K3Winner Comfort panel saw with a cutting length of 300 mm. The machine was only in use for a short time and can therefore be described as new. Technical data: - Panel sliding table 2000 mm - Outrigger table 1100 mm - Miter ruler 1300 mm - Degree grid index - Circular saw swivels 90-45° - Cutting height max. 104 mm with saw blade D315 mm - Cutting width 800 mm - 5.5 HP (4 kW) motor 400 volts - Year of manufacture 2024 The circular saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, hammer, panel saw, format Fgjb Hdqcev H Admocjb Reference: R-E2B61

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, cutting height (max.): 85 mm, saw blade diameter: 350 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), FOUR-SAW BOARD PTF EDGER in very good condition. Working 1,5 years. After saw a brush system to clean boards from sawdust. Fgsb Hdjv Hbb Rjqcceb

Condition: used, SECOND-HAND BAND SAW CENTAURO MOD. 800 Fgsb Hdqcjr Ilxcscob

Condition: excellent (used), Cutting height 42cm-56cm Cutting width 20cm-40cm Fgob Hdqcov Euraoceb Engine 20 HP Belt width 110mm Belt length 6520mm

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, motor voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Fjb Hdov Aywpjqccegb

Condition: used, for saw blade Ø up to approx.: 280 mm here cutting height approx.: 70 mm saw blade speed: 2600 rpm Fgsb Hjb Nwgnsdqccob drive motor: alternating current 220 V, 1,47 kW Space requirement: 670 x 520 x 800 mm Weight: 31 kg

Year of construction: 2023, Condition: excellent (used), Functionality: fully functional, TWIN-L: mobile saw PROFICUT with loading frame for packages The new TWIN-L enlarges the range of PRINZ universal cross-cut saws. Based on the well-proven PROFICUT saws, the TWIN-L makes cost effective cuts possible with maintaining a high-quality processing of the lumber packages. Cutting efficiently with the new TWIN-L: saw is pushed and fixed by hand: no new positioning of the saw after each cut guide-bar always in correct squaring position to the package Fgeb Hdjvzlr Noqccob saw always remains in position during the entire cutting, no deviation

Year of construction: 2006, Condition: excellent (used), Fly wheel diameter : 800 mm Engine size : 4 Kw Tilt of table : 0 - 45 degree Fgjb Hdqjlk Ilyoccsb CoMaFer feeder with adjusteble speed, rubber feed wheel ( Year 2020 ) Maximum cutting hight : 680 mm Maximum cutting width : 750 mm Machine measures : L 1400 x W 1000 x H 2700 mm Request live video presentation on WHATSAPP

Condition: used, Year of construction: 2011, machine/vehicle number: KK1/032231, SECOND-HAND CIRCULAR SAW MINIMAX SC/3W - CE RULES - 3 KW Fgjb Hdqor Iycbeccjb - Volt. 400/850 - SN KK1/032231 - Year 2011

Year of construction: 2025, Condition: new, Functionality: fully functional, new mobile package cross-cut saw Holtec Piccolo Fgeb Heh Imuvsdqccob ideal for start / end and cross-cuts on timber packages chain set with STIHL chain type Rapid Super 0.404" for extremely fine surfaces and stellited guide rails on both sides (four-way reversible) 5.5 kW electric motor High cutting performance for bundles up to 1.10 m x 1.10 m and log diameters up to 1.30 m blade length: 1.60 m 400V, 50 Hz 1 year guarantee immediately available from stock

Condition: reconditioned (used), Year of construction: 2002, Functionality: fully functional, saw blade diameter: 400 mm, motor voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, plate width: 1,100 mm, length stop: 3,200 mm, Format 4 X motion from 2002 in excellent condition, always worked on by 1 person as a side job Fgob Hov Ayp Sodqccjb

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V Fsb Hdqcobbbhnecegb sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm weight: 355 kg

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Robland Z400 format saw Scorer on a separate engine (0.75KW) Carriage length 320cm 0-45° tilt manually adjustable Saw up and down manually adjustable Culaga on the right side manually adjustable, max width 1380 mm 7.5KW main engine 3 cutting speeds adjustable on the belt Year of production: 2019 Branded machine, technically fully functional, will still fulfill its functions well Fsb Hdqcjv Exguocogb

Condition: excellent (used), Functionality: fully functional, saw blade diameter: 700 mm, saw drive: 7,500 W, operating pressure: 6 bar, disc diameter: 700 mm, Large size carpenter industrial cutting circular saw. Powerful engine: 7,5Kw. 380V. Forward and backward movement is pneumatic. Height adjustment is electric. Fgjb Hdqev Ic Iuocceb La diameter: 700mm.

Condition: used, Year of construction: 2014, machine/vehicle number: 1314, MULTIRIP WITH 1 MOVABLE BLADE SAW CML MOD. J 350 R CE Fob Hder Ilyheqccjgb - Motor 40kw - N.1 movable blade - Max blade diam. 370 mm - Cutting width 320 mm - Feeding belt width 350 mm (the conveyor is in perfect conditions) - Max width for timber 690 mm - Max. distance between fixed and moving table 300mm (both moving heads installed) - Max. distance between fixed and moving table 320mm (only one moving heads installed) - Inverter on feeding speed - Pressure rollers - Weight 2000 kg - Year 2014 - CE rules

Year of construction: 2025, Condition: new, Functionality: fully functional, 1 new mobile Holtec KAPPSTAR HF122 package crosscut saw robust all-rounder for sawn timber and logs for start / end and cross-cuts Package cross-sections up to 1.30 m x 1.30 m Log diameter up to 1.60 m Electric motor 11 KW STIHL pointed tooth chain for cross-cutting sawn timber or with STIHL planer tooth chain for cross-cutting logs Stellite guide bar on both sides (four-way reversible) Bar length: 1.90 m 400V, 50 Hz Fgjb Hdqoh Imu Djccjb 1 year guarantee

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 452-0822, cutting length (max.): 2,550 mm, cutting height (max.): 1,250 mm, total height: 1,850 mm, total length: 3,500 mm, workpiece weight (max.): 100 kg, total width: 700 mm, overall weight: 100 kg, workpiece height (max.): 40 mm, For: chipboard, plywood, blockboard, MDF, plexiglass, acrylic, polycarbonate, fiberboard, veneered panels, sandwich panels, Alucobond, Dibond, PROMAT, Rigips, Fermacell, Trespa and much more. The panel saw consists of a special aluminum profile frame and an MDF support plate. This construction gives the panel saw optimal stability with low weight. The sliding carriage is guided horizontally by 8 ball bearings and 2 toothed belts. A repeat stop including scale (up to 700mm) is mounted on the left of the sliding carriage. This stop enables strip cutting from the top edge of the panel material. Fgsb Hdqcov E Egnjcjb The sliding carriage contains the turntable made of VA sheet steel, which is suspended on 2 pull ropes. The plunge saw TS 75 EBQ is mounted on this turntable. The turntable can be rotated by 90° for horizontal or vertical cuts. A locking bolt fixes the positions. There is also a pressure shoe under the turntable. This pressure shoe presses the panel material onto the MDF support plate.

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: Fgeb Hdstqfv Ioqccsb - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, Year of construction: 2001, SECOND-HAND MULTIRIP SAW TYPE COSMEC SM400 - CE RULES - Conveyor width 400 mm - Max working thickness 140mm (blade diam. 400mm) - Max timber width 800 mm Fob Hdqcor Ilxnjcsgb - Feeding speed 5-30 m/min - Motor 60 hp - Year 2001