Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm Cob Howf Rgrja U E Ierb The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: like new (used), Table length 3000 mm Table width 1500 mm Table height 200 mm Bore hole 28 mm Material thickness approx. 24.5 - 27 mm Side panel height 200 mm Weight approx. 1,400 kg Slight signs of wear on the surface Welding table: – 4 feet – standard configuration 650 mm – Through-hardened tool steel X8.7 + plasma nitriding – Material thickness approx. 24.5 - 27 mm Csb Hajwgk Sdo U E Iorb – Side panel made of high-quality steel S355J2+N + plasma nitriding – 28 mm diameter bore – Diagonal grid holes on the surface – Rounded corners, edges, and holes – Side panel height 200 mm – Diagonal grid holes on the side panel – Including scale on the surface – Reinforced construction with ribs – Grid lines enable precise assembly

Condition: not inspected (used), Manufacturer: SERRA Crjbsgu U Une Ha U E Ijb

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system Ceb Howd Tg Sea U E Iorb -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm Weight: 459 kg

Condition: ready for operation (used), Year of construction: 2023, Main Drive Crebjwhgq Sj Ha U E Ijb Max reach 3500 m Additional Equipment Touchscreen teach pendant with LED backlight (8.4") Torch cleaning units Wire feeding systems Two-station positioner with turning and swiveling movement This CLOOS QIROX CS-50 was manufactured in 2023. A state-of-the-art welding robot featuring a Qineo NexT 452 with 450A power and water cooling module. It includes a two-station positioner capable of handling loads up to 5 kN, ensuring robust performance and flexibility. Ideal for complex welding tasks, the robot supports fiber optic connection cables and has a comprehensive safety system with light curtains and safety fences. For more information about this welding robot, please reach out to us. Application Types Robotics

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit. Csb Ha Uoivg Hge E Ijrb

Condition: new, Year of construction: 2024, YAWEI Hand Laser Welding Machine YLMW - exclusively at H+S Maschinentechnik GmbH Creb Hasrg Et Uo U E Iob Laser sources: 2000 W - Mild steel: up to 5 mm - VA: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - mild steel: up to 8 mm - VA: up to 8 mm - Aluminum: 7 mm Scope of delivery: - Laser welder with cooling system - Hose set + cable set - Welding gun with adjustable focal length and accessory set - Fiber laser source 3000W from MAX Photonics (2000W optional) - Automatic wire feed Technical data - Laser power 3000 W - Laser wavelength 1064 nm - Power supply 220V We have been the exclusive dealer and service partner for YAWEI machines in the EU for more than 15 years. In addition to press brakes, we also offer laser machines, tube lasers, laser welding machines etc. from YAWEI.

Condition: used, Functionality: fully functional, load capacity: 5,000 kg, Equipment: rotational speed infinitely variable, Used Esab welding roller/manipulator working good. 5000 kg. for each roller Creb Hewhiugsa U E Ijb

Condition: not inspected (used), for sale in pictured condition Cjbjh Ti R Nj Ha U E Ierb

Year of construction: 2002, Condition: excellent (used), Severn Science Argon Vacuum Welding chamber, new in 2002, previously used in F1 motor racing facility. With Edwards E2M 80 vacuum pump. Crsb Ha U Esrwnrgo Isb Excellent condition, very rarely used.

Condition: reconditioned (used), Step-controlled MIG/MAG industrial machine Separate 4-roll wire feeder case Integrated control for secondary parameters such as wire feed Plug-in intermediate hose package Soft arc for extremely low-spatter welding of solid and flux-cored wires, for low- to high-alloy materials Oscillating piston pump for optimal cooling Euro-ZE for common torches Technical specifications: Line voltage: 400 V Current range: 40 to 385 A Min. open-circuit voltage: 17.4 - 19.2 V Max. open-circuit voltage: 41.6 - 45.4 V Application class: S Protection class: IP 21 Crjb Haewhwx Te U E Ieb Wire feed rate: 1.7 - 18 m/min Voltage steps: 24 Choke taps: 2 Duty cycle: 335 A at 35% 300 Amps at 60% 240 Amps at 100% Weight: approx. 163 kg Scope of delivery: 5 m power cable + 16 A plug, gas hose, short ignition lead, operating instructions

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Crjb Ha U Eol Dw U De Ijb Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: excellent (used), Year of construction: 2022, On behalf of a customer we offer a plasma cutting machine from Boschert - Ergocut 4020. It works perfectly and can be tested under power at any time. Technical data: Processing table: 4000x2000mm LxW: 5000x3000mm Labold CNC control with 19" touchscreen CAD system (dxf/dwg/iges/cadl) incl. CNC CAD software Drilling and tapping unit ER25 chuck 200mm clearance between table and torch Moving suction unit (suction unit optional) Plasma source: Hi Focus 161i from Kjellberg 2 PerCut 211 plasma torch inserts Csbeu Rbqks Ha U E Ijrb Automatic gas mixing system Automatic height adjustment

Condition: used, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture 1997 Serial no. Welding source 9885186 Fabric no. Cooling unit 97861? Power 200 Amp. = 20% ED 90 Amp. = 100% ED Mains connection 230 Volt, 50 Hz, Schuko plug - Cable remote control type BP 1436 with 7.5 meter connection cable - Power setting from 1 to 200 amps - direct current only = DC - HF ignition - Cooling water unit for burner cooling - 44895 operating hours read off - Operating and maintenance instructions Space required for welding machine L x W x H 550 x 360 x 500 mm Space required for cooling unit L x W x H 550 x 360 x 550 mm Crebst Awm Ds Ha U E Isb Weight of welding machine 45 kg Weight of cooling unit 25 kg Good condition without accessories Price is for a set consisting of 1x power source and 1x water cooling unit.

Condition: good (used), Year of construction: 1990, Type: TIG / Electr.,. Supply: 400 v, Power: 250 amps, Note: 9.6 of kVA, water cooling, Weight: 150 kg Cob Ha Usd Ivchs E Ierb

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, type of input current: AC, sheet thickness steel (max.): 32 mm, worktable length: 6,000 mm, worktable width: 2,000 mm, Nice and well maintained plasma cutter with 6x2 meter table. The machine has a 130A hypertherm powersource. The machine is fully functional and can be seen in operation, many new wear parts and a complete exhaust system are included. Crobjwhdrte Ha U E Iob The price is exclusive of VAT.

Condition: reconditioned (used), TIP TIG – All-in-One No matter what welding task needs to be completed, the new TIP TIG All-in-One is ready for it. And much more. It's more powerful than its predecessor and yet incredibly easy to use. The completely redesigned wire feeder looks as impressive as it feels to weld with. TIP TIG All-in-One. Everything you expect from a modern welding system. Just a little, well, better. Features TIG cold wire and hot wire welding with dynamic wire feed system. Dynamic wire feed for a controllable weld pool, even in out-of-position welding. Up to 300% faster welding speeds compared to TIG welding. Up to 400% higher deposition rate. Reduction of dilution by up to 80%. High process reliability and reproducible welding results. Higher welding speed and ease of use. Heat input to the wire for improved deposition performance and an even lower risk of weld defects. Perfect weld appearance, no weld spatter. 4-roller drive for a maximum wire diameter (solid) of 1.2 mm. The All-in-One wire feeder can be used with any TIG welder. Line voltage 110/115/120V AC 220/230/240V AC Frequency 50Hz to 60Hz, single-phase Wire feed speed 0.15 to 17 m/min Dimensions (H x W x D) Crob Ha U Eowhwv Es Isb 525 mm x 352 mm x 600 mm Net weight 34 kg

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Creb Hewgknxea U E Isb Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Condition: ready for operation (used), total length: 5,600 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, net weight: 4,000 kg, total depth: 3,200 mm, Type: MCCompact 4001.20 P High definition Hypertherm plasma source Extraction in the table Cebowdkpde Ha U E Ijrb Z-axis: 150 mm cap mild steel: 38 mm cap stainless steel: 25 mm cap alu: 25 mm Table dimensions: 4000 x 2000 mm Plasmasource: Hypertherm HPR130xd Gas cutter: 1x plasma Read-out / Control: iMSNC 500

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,320 h, Main Drive Number of axis 3 Additional Equipment Includes software: FlowCUT, FlowPATH Cjb Hswf Snqja U E Iorb This 3-axis Flow Mach 3-3020b was manufactured in 2014 and is a robust waterjet cutting machine. It features a max. cutting speed of 7.6 m/min and a travel speed of 12.7 m/min. The cutting surface is sizable at 3 x 2 m, and it includes a 4150 bar Hyplex Hybrid pump with Dynamic Waterjet and Paser cutting systems. Software FlowCUT and FlowPATH are included. If you are looking to get high-quality cutting capabilities consider the Flow Mach 3-3020b machine we have for sale. Contact us for more information. Application Types Cutting

Condition: good (used), Year of construction: 1985, Type: TIG and electrodes Connection: 400 Volt Crobjgtcznj Ha U E Ijb Power: 5-250 Ampere Remark: With foot switch, water cooling Drive: 32 Ampere Weight: 150 kg

Condition: used, ID43744 Csb Ha Uewhd Nfj E Iorb Welding machines Brand: Invertec Type: V270T Lincoln Electric Including all necessary cables

Condition: reconditioned (used), Inverter for MIG/MAG, MMA + TIG welding, 4-roll DV unit for material thicknesses up to 1.2 mm, Synergic control for continuously adjustable welding parameters, MIG MAG Pulsed + Double Pulsed MIG, program storage possible, Burn Back Wire burn-back control at the end of the weld - no ball formation, Wire Start Control prevents the wire from sticking to the workpiece, automatic. Slope Down during TIG welding, WFC auto control of welding parameters, and extremely high arc quality in TIG + MMA ensure optimal welding results. Technical specifications: Csb Ha U Ejwhwqco Ierb Line voltage: 400V 3-phase Fuse: 10A Wire: 0.6-1.2mm Welding current: 10-250A Welding current ED 40%: 250A Welding current ED 60%: 200A Welding current ED 100%: 160A Cooling type: Gas-cooled Weight: 29kg Dimensions: 290x615x525mm Included: Power cable, operating instructions

Condition: used, Year of construction: 2006, filter area: 84 m², suction capacity: 4,000 m³/h, Dust extraction, welding fume extraction, self-cleaning filter, cartridge for plasma, laser, sandblasting, shot blasting. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: SULT Model: FLC 2-4 HP Year of production 2006 Engine power 4 Kw Efficiency: 2000 - 4000 m3/h Cartridge filter inserts - 4 pcs. Filtration surface 84 m2 total height - 2.95m width - 1.20m Crsb Ha U Eewgirco Isb depth - 1.15m stock no.: 0987

Condition: good (used), Year of construction: 1993, filter area: 212 m², suction capacity: 8,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF12cyclopeel - with pre-separator. Cartridge filter cartridges cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Cjbstrxzro Ha U E Ierb Cartridge filter cartridges. Fan of 11 Kw Efficiency 8000 m3/h Filtration surface 212 m2 Filter cartridges 12 pcs. Inlet diameter - 400 mm Control cabinet Dimensions: width - 2.20m x 2.10m height - 4.10m