Year of construction: 2000, Condition: used, 6 Meter weight of the machine ca. 1 t Deln Hm Hog Sxzzjzsut

Year of construction: 2018, Condition: used, current intensivity 400 A weight of the machine ca. 125 kg dimensions of the machine ca. 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Dolnenf Ir Ae Hm Hzjut Fuse protection 25 IP protection class 23 Insulation class H

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 1000 mm Width 1000 mm Thickness 230 mm Working height 970 mm Panel thickness 38 mm throughout - Metal base frame Dolodzqr Asn Hm Hzout Weight 450 kg

Condition: new, Year of construction: 2024, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection Duoln Hm Houia Naezjt • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: excellent (used), Year of construction: 2008, IDEAL BAS 040 Flash butt welding machine for band saw blades BiMetal bandsaw blades 13 to 27 mm Wood bandsaw blades 6 to 40 mm Dsln Hm Hev A Tdpjzout The machine is in perfect condition and fully functional.

Condition: excellent (used), Year of construction: 2015, operating hours: 4,830 h, Functionality: fully functional, machine/vehicle number: Dynamic 1500, type of input current: AC, working range: 3,000 mm, input voltage: 400 V, sheet thickness steel (max.): 10 mm, cutting current: 40 A, Stigal DYNAMIC 1500 plasma cutter, year of manufacture 2015, work table for cutting sheets up to 1500x3000mm. The set includes the Cutmaster A80 plasma unit designed for cutting black and galvanized steel sheets up to 10mm thick. Very good condition. The machine is used in continuous use to cut only thin galvanized steel sheets with thicknesses from 0.5mm to 1.0mm used in the production of prefabricated ventilation elements. Serviced by the STIGAL factory service on an ongoing basis every year, all necessary parts replaced according to the needs and recommendations of the manufacturer. All consumables came from the original distribution of the STIGAL manufacturer. The machine has been working in our company since new. The machine is in order and connected to all media. Interested parties are welcome to view and check it on site during operation. Dsln Hevzlpnsm Hzsut The machine works on codes generated by CAM software, i.e. Lantek or Wrykrys. Additional photos and a video of the machine working are available for those interested after prior contact. Possibility to buy the cutter together with the dust collector visible in the photo. The given net price (the offer price applies only to the plasma cutter with the unit). The machine is available immediately.

Condition: used, table length . mm table width . mm table load 2 t Dusln Hmjud Tpio Hzst total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m

Condition: used, current intensivity 400 A open-circuit voltage 65-75 V IP protection class IP21 Dusln Hmed Ih R No Hzot Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 1000 mm Dolnsdzqrpo Hm Hzjut Width 800 mm Thickness 250 mm Working height 820 mm plate thickness 30 mm throughout - Height-adjustable metal substructure Weight approx. 400 kg Rusted surface

Condition: new, table length 2000 mm table width 1000 mm table height 920 - 1000 mm 2000 kg height of stroke max. 1525 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Djln Hevu Hahjm Hzout Ribbed bottom for reinforcement.

Condition: used, Mentallit PROFI-LINE 215 AC/DC welding machine For technical data see type plate. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Duslerrfpajn Hm Hzst Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar FELDPAUSCH nut and bolt feeder TYPE: MSV 08 Deln Hovgd Efem Hzout

Condition: ready for operation (used), Year of construction: 2013, operating hours: 50,000 h, Functionality: fully functional, laser power: 2,000 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 95 mm, pipe diameter: 120 mm, travel distance W-axis: 85 mm, swivel angle A-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-tube axis: 6,500 mm Y-beam guidance axis: 170 mm Z-beam guidance axis: 95 mm A rotation axis (chuck): n x 360° A1 rotation axis (steady rest): n x 360° W unloading piece support: 85 mm Control: Siemens Sinumerik 840D Operating hours: approx. 50,000 h Speeds X-tube axis: 90 m/min Y-beam guidance axis: 30 m/min Z-beam guidance axis: 22.5 m/min A rotation axis (chuck): 750°/s A1 rotation axis (steady rest): 750°/s Accuracy Position accuracy of interpolated axes: ± 0.05 mm Reproducibility: ± 0.03 mm Position deviation: ± 0.1 mm Workpiece dimensions Dusln Hmsvy Am Ie Hzot Max. raw material length: 6,500 mm Min. remaining tube length: 160 mm Length of finished part: 4,500 mm Min. tube diameter: 12 mm Max. outer circle diameter: 120 mm Min. edge length for rectangular and square tubes: 12 mm Max. circle diameter for labeled rectangular/flat oval tubes: 140 mm Max. weight of workpiece: 13.5 kg/m Laser source Manufacturer: Rofin Sinar Model: DC020 Max. laser power: 2,000 W Beam mode K-factor: >0.9 Sheet thickness Sheet thickness mild steel (O2): 6 mm Sheet thickness stainless steel (N2): 4 mm Sheet thickness aluminum alloy (N2): 3 mm Consumption values Laser gases: Premix gas bottle in the laser source (replace every 12-18 months) Cutting gas consumption: O2 or N2, depending on material and part geometry Electrical consumption: 20 - 40 kW/h (varies depending on material and geometry) Compressed air consumption: 30 Nm³/h

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Doln Hoflt Ecjm Hzeut Length 3050 mm Width 2000 mm Thickness 300 mm Panel thickness approx. 55 mm throughout Weight approx. 4.5 tons good condition

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079 Dujln Hm Hevgdt Aszot

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Doln Hm Heicic Hozsut Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Welding fume extraction, soldering fume extraction, laboratory fume extraction High Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D Serial. No. 2902619 Year of construction 2004 Device air volume flow max. 250 m3/h Minimum air flow rate min. 100 m3/h Separation efficiency 99,97 % Welding smoke class W3 Motor power approx. 0.75 kW Mains connection 230 Volt, 50 Hz - Suction power infinitely variable - 2 suction connections Ø 45 mm Djln Hod Rxnmom Hzout - mechanical air filter (used) - mobile base frame with 4 fixed castors, platform roller space requirement L x W x H 700 x 500 x 600 mm weight suction 35 kg weight platform roller 7 kg good condition

Condition: used, Tig welding machine KESTRA type WIG 350 AC/DC Serial no. Year of manufacture approx. 1985 Power 350 Amp. = 60 % ED Adjustment range 3 levels and fine adjustment Current type AC / DC Mains connection 400 Volt, 50 Hz, 32 Amp. Plug - 4 meter hose package with TIG torch - 2 cycle / 4 cycle welding unit - Water-cooled - Gas pressure reducing valve Space requirement L x W x H 1050 x 560 x 900 mm Djljdzql Son Hm Hzsut Weight 250 kg good condition

Condition: used, Flame heating device Roland Groß + Söhne GmbH Deln Hmedz Spwj Hzout Ring burner for heating Type 1 x 1" ionization Product No. ALMA 01 Year of manufacture 03/2010 Connected voltage: 230 Volt Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Including 10 different flame ring nozzles - Flame monitoring Hans Henning - Hinged ring nozzle made of 2 half shells, inner Ø 310 mm, with hose plug-in coupling and ignition device, air outlet on front side - Hinged ring nozzle made of 2 half-shells, inner Ø 400 mm, with plug-in hose coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half shells, inside Ø 490 mm, with hose plug-in coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half-shells, inner Ø 500 mm, with hose plug-in coupling and ignition device, front air outlet - Hinged ring nozzle made of 2 half shells, inside Ø 590 mm, with hose plug-in coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half shells, inside Ø 690 mm, with hose plug-in coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half shells, inside Ø 690 mm, with hose plug-in coupling and ignition device, air outlet at the front - Hinged ring nozzle made of 2 half shells, inside Ø 800 mm, with hose plug-in coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half shells, inside Ø 890 mm, with hose plug-in coupling and ignition device, air outlet at the front - Hinged ring nozzle made of 2 half shells, inside Ø 890 mm, with hose plug-in coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half shells, inside Ø 990 mm, with hose plug-in coupling and ignition device, air outlet in the middle - Hinged ring nozzle made of 2 half shells, arc length 1500 mm, with plug-in hose coupling and ignition device, central air outlet For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and production of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-speed flame spraying. Heating with gas for thermal coating.

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Dsln Hodzqccjm Hzjut Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Tig welder L-TEC type Inverter TIG 200 DC Make No. 184548 Year of construction approx. 1994 Power 200 Amp. = 60 % ED 155 Amp. = 100 % ED Adjustment range stepless Current type DC (direct current) Mains connection 400 Volt, 50 Hz, 32 Amp. Plug - 4 meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure reducing valve - only direct current Doljdzqb Een Hm Hzout - HF ignition space requirement L x W x H 850 x 480 x 740 mm weight approx. 150 kg good condition

Condition: used, Fiber laser, fiber laser cutting machine with flatbed and tube laser Laser cutting machine, laser cutting system, laser machine Manufacturer DURMA Type HD-F III 3015 III BH-IPG 2kW Serial no. 822817712 Year of construction 2017 with IPG laser source SIEMENS SL 840D + CAD software + nesting software Working area 3000 x 1500 mm Pipe cutting device up to Ø 400 mm Laser power: 2000 watts (fiber laser) Output power: 0.2..2 kW Wavelength: 1070..1080 nm IPG power requirement: 6.4 kW/hour - Polarization random - Collimating focal length FC 100 mm - Focusing focal length FF 150 mm - Fiber diameter in single mode 50,100,200,300 µm - Max. power consumption 42 kW - Machine power consumption 20 kW - Filter power consumption 4 kW - Cooler power consumption 10+1 kW - Resonator power consumption 7 kW Mild steel Sheet thickness max. 12 mm - Stainless steel Sheet thickness max. 6 mm - Aluminum Sheet thickness max. 6 mm - Copper Sheet thickness max. 3 mm - Brass Sheet thickness max. 6 mm Working range X-axis 3060 mm Working range Y-axis 1530 mm Working range Z-axis 160 mm Sheet size max. 3048 x 1524 mm Sheet weight max. 200 kg/m² - IPG fiber laser resonator opposite - Water recooling unit for laser source and cutting head opposite - Under-table extraction and extraction filter system opposite - with 2-fold shuttle table - Tube laser with 4-jaw chuck and large spindle bore next to the flatbed - Lynettes for Rorlaser on linear guides - with CAD software - with nesting software - with tube laser software Djlekdnv Tjn Hm Hzsut very good condition

Condition: used, Spot welding machine DALEX type SF 204 Machine. No. AZA/N-32865 Year of construction 2010 Power at 50% duty cycle 30 kVA Continuous power 21.2 kVA Maximum short-circuit power 108 kVA Maximum welding power 86.4 kVA Projection 500 mm Arm distance 350 - 500 mm Electrode force 65 - 360 kp (short throat depth) Electrode force 25 - 140 kp (long projection) Djln Hjit Rq Hsm Hzjut Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Sheet steel 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 +3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 Volt Connected load 55.2 kVA Mains connection 400 Volt, 50 Hz - Multifunctional welding control unit with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot lever operation - Water-cooled (cooling water volume requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with substructure) Weight 196 kg Very good condition Identical spot welding machine under stock number 60858.

Condition: used, Rotary welding table - Rotary tilting table with hydraulic tilting movement PROTARC - ZAAR & Co. Type PF-DF 3000 Serial no. 3620 Year of construction 1985 Load capacity 3000 kg Face plate size Ø 1100 mm (950 x 950 mm) Face plate speed 0.05 - 1.25 rpm. Speed min. 1 revolution in 10 minutes (tested) Speed max. 1.25 revolutions in 1 minute (tested) Table position tiltable 0 - 110 Vertical table height 1180 mm Horizontal table height 940 mm Welding current transmission 800 Amp. Motor power table drive 2.2 kW Motor power hydraulics 1.1 kW Mains connection 380 Volt, 50 Hz - Manual function switch for faceplate rotation direction and table speed - Foot switch for right and left rotation and stop - Hydraulic tilting function with 2 hydraulic cylinders - Speed control via frequency converter Space requirement L x W x H 1700 x 1400 x 1180 mm Djln Hmspy Uz Do Hzout Weight 1600 kg Very good condition

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Deln Horz Tupem Hzeut weight 75 kg good condition