Condition: used, Used machine Equipment and technical specifications: Lock case milling unit Lever hole drill Mortise milling cutter Including accessories Motor 1.7 kW Fpoln Ujwhuk Te U Eieg 2800 rpm Location: Mainz Availability: Short term

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Fjln Ujwhgd Sj U Eijpg Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: used, Year of construction: 2021, Working dimension X: 4.140 mm Working dimension Y: 1.570 mm Feln U U Eewbankjijpg Working dimension Z: 275 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 13 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Linear tool changer: Yes Tellerwechsler 13-fach: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Gantry machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Electronic supervision of the end-position of the stops: Yes Workpiece support aids: Yes Number of consoles: 8 Pneumatic pipe connectors: an den Konsolen BIESSE Preparation for Uniclamp: Yes Positioning aid: Yes BIESSE SA machine table: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Barcode reader: Yes Safety device: Bumper Chip conveyor: Yes Interface for .dxf data: Yes Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Automatic lubrication: Yes Remote control: Yes Package for abrasive materials: Yes Control: BIESSE BH 660, BIESSE bTouch Software: BIESSE B_SOLID, BIESSE BSOLID 5-ACHS-MODUL, BIESSE SOPHIA, BIESSE BSOLID DATENIMPORT Conformity marking: CE mark

Condition: used, Motor power: 9.5 HP (7.0 kW), motor frequency: 50 Hz, chain conveyor, glue heating, pressure roller, combination trimming units, pressure beam adjustment, impact shears, glue roller, Attention: Edge feed out of function, as well as both snipping units, edge has overhang at the front and rear, which must then be worked in manually Fpeln Ujwhb Tzo U Eisg

Condition: used, Year of construction: 1992, Offer in progress! Fpslnjwh Uhfj U U Eiog

Condition: good (used), Year of construction: 2015, Automatic double-blade miter saw Manufacturer: A+ automation Type: T300/T350 auto Year of manufacture: 2015 Retrofit in 2023 Including vertical loader Including conveyor belt for removal Feln U U Esvrcbcjijpg High-speed, high-quality cuts with up to 500 frames/hour ä080525

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim Fpsln Uewhui Ao U Eijg

Condition: excellent (used), Year of construction: 1986, TECHNICAL DATA: - Maximum planing width: 530 mm Fpjln Ujwhf N Ts U Eisg - Maximum planing height: 240 mm - Number of knives: 4 - Motor power: 5.5 kW - Electric thicknessing table adjustment - Feed speed: 2 speeds - Infeed roller - Low-pressure bar - 4-knife planer block - Strip planer knives - Outfeed roller - 2 sliding rollers in the table MACHINE DIMENSIONS: - Length: 990 mm - Width: 930 mm - Height: 1080 mm - Weight: approx. 630 kg Location: arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: used, Year of construction: 2023, Workpiece width max: 455 mm Workpiece thickness max: 200 mm Workpiece length max: 13.300 mm Fpeln Ujwa S T Ne U Eieg Crosscut height: 200 mm Aggregates total: 4 Positioning cart: 2 Number of sawing aggregates: 1 Number of milling aggregates: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 5-axes technology: Yes Birds mouth cutting unit: Yes Shark cutter: Yes Scribing: Yes 4-side milling aggregate: Yes Saw for shifter cuts: Yes Printer: Yes Labelling: Yes Workpiece feed: Log carriage Control: Homag powerTouch Conformity marking: CE mark

Condition: used, Offer in progress! Fpsln U U Eswh Ug Usieg

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Fsln Uswhui No U Eispg Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2024, Working dimension X: 2.600 mm Working dimension Y: 900 mm Working dimension Z: 60 mm Number of milling spindles: 1 Main motor power: 4,5 kW Rotation speed max: 24.000 rpm Tool clamping system: Collet Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 17 L: Yes Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Safety device: Safety mat, enclosed cabin Control: PC control Software: BIESSE B_SOLID, BIESSE SOPHIA Conformity marking: CE mark, UKCA-Zeichen Total connection: 12 kW Weight: 1.800 kg Fjln U Uswa S Rbe Eijpg Space requirement Length: 2,8 m Space requirement Width: 1,94 m Space requirement Height: 2 m

Condition: used, Year of construction: 1991, Used machine Year of construction 1991 Equipment and technical data: Edge banding machine for pre-coated edge material High-performance hot air blower Electromagnetic roller cutter Hebrock system edge trimmer End trimming: Trimming module for flush cutting the front edge overhang edge overhang Feed: 3-roller system Delivery on both sides Fsln Uevimxge U Eijpg Attachment trolley, mobile max. edge thickness approx. 1 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 170 mm min. Workpiece width approx. 50 mm Feed rate approx. 4 m/min. Ready for operation: approx. 1 minute Dimensions 1730 x 690 x1240 mm Weight approx. 115 kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2010, Working width: 630 mm Working height max: 300 mm Number of knives: 4 Fjln U Usvvydpo Eijpg Working height min: 3 mm Rotation speed: 4.600 rpm Table length: 1.100 mm Number of feed-out rollers: 1 Main motor power: 11 kW Feedrate max: 20 m/min Continuously variable feed: Yes Digital readout for thickness: Yes Segmented pressure bar: Yes Electromotoric height adjustment: with digital readout Cutter block: Barke/Brück Outfeed: Steel roller Control: FORMAT 4 POWER-DRIVE Conformity marking: CE mark Space requirement Height: 1,2 m

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Technical data Workpiece length at least 210 mmEdge thickness 0.4 mm – 2 mmMotor voltage 3 x 400 VWorkpiece width at least 95 mmWorkpiece thickness10 mm – 45 mm Joining unit application-controlled – can be switched off Continuous edge feed via support plate Edge feed for roll materials from 0.4–2 mm thickness, strip edge banding with individual feed Gun shears for continuous edge material up to 2 mm thickness in hard PVC/ABS Glue unit Teflon-coated, 1.0 kg for hot melt adhesive granulate (~ 250lfm per 1kg granulate on a 19mm plate) Pressure unit mechanically pre-tensioned, 1 straight pressure roller and 1 pressure roller Fpjln U Ujwhuips Eijg Gun shear unit with 2 cutting knives for end cutting Multifunctional milling unit 11,000 rpm, 0.37 kW, radius milling, chamfer milling for thin edges Tooling for radius 2 mm Radius scraper unit, mechanically switchable for R= 2 mm including chip collection box for scraper sections Polishing unit, 2 motors, 1400 rpm, 900 W Control panel with LCD display and keypad Workpiece transport via chain conveyor Feed speed 7 m/min (~ 250lfm/h) Extendable workpiece support Optional equipment Surface scraper, can be switched on mechanically Spray device for cleaning agent on polishing unit (!21/!30A) with infrared heating lamp for preheating the panel edge Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2019, Working width: 230 mm Planing height: 160 mm Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Spindles left: 1 Spindles top: 2 Spindle configuration: b-r-l-t-t-b Spindle rotation speed max 1/min: 7.000 rpm Spindle diameter: 40 mm Feedrate max: 40 m/min Continuously variable feed: Yes Feed motor: 7 kW Main motor power: 11 kW Seperate motor per spindle: Yes Motoric adjustment: Programmable controller Surface of the machine table: hard-coated Infeed table length: 2.000 mm Table rollers: driven Lubrication pump: manually Pneumatic top pressure: Yes First infeed roller controlled: Yes Type of feed roller drive: Cardanic Control: WEINIG MEMORY PLUS-SYSTEM Weight: 3.100 kg Fjlnjwigumo U U Eiepg

Year of construction: 2024, Condition: new, Return System Felnowhukyj U U Eiopg The RTS Compact is a standalone system that can be connected to any KAM, regardless of the manufacturer. The throughput speed is continuously adjusted to the speed of the KAM. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optionally available with the "RTS Compact Conveyor System Extension" for easy rotation of parts during cross-edging. Optionally available with the "RTS Compact Ergonomics Package." A lifting table and an air cushion table are installed at the end of the return conveyor. This option enables ergonomic working. Connection to KAMs of all manufacturers One-person operation of the KAM possible Maximum ergonomics Savings in personnel costs Material-friendly transport Installation time: approx. 0.5 days Rotating device for small parts with conveyor belt L 4500 W 800 Single-track roller track RTS Compact control system with optional control box Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2022, Working dimension X: 2.500 mm Fpolnewigt No U U Eieg Working dimension Y: 1.000 mm Working dimension Z: 80 mm Number of milling spindles: 2 Main motor power: 3,3 kW Rotation speed max: 18.000 rpm 4th axis: Yes Horizontal drilling spindles in Y: 1 Cantilever machine: Yes Machine table: Feed-through technology Special workpiece clamping system: For doors Outfeed: vacuum lifter Milling for fittings: Yes Insert fittings: Yes Control: PC control Conformity marking: CE mark Space requirement Length: 9,7 m Space requirement Width: 4,1 m

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Feln U U Ejvymfbsiopg Minimum width 60-80 mm (depending on the edge material) Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2017, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 18 m/min Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: Yes Fpoln U Uowigtvj Eieg Spraying device: Yes Premilling unit: Yes Type: left-side machine Machine length: 5.610 mm Control: BIESSE SMART TOUCH

Condition: used, Year of construction: 1984, Used machine Year of construction: 1984 Machine is completely overhauled Table size 1100 x 880 mm drive motor pole-changing 5/6 kW Spindle speeds 3000/4500/6000/9000 rpm Manual height adjustment via handwheel Manual swivel adjustment via handwheel Height adjustment of the milling spindle 110 mm Fslewhuicjn U U Eispg Angular adjustment of the milling spindle -5° to45 °; mounted on both sides Reversing switch for clockwise and counter-clockwise rotation with 3-roller feed unit without Aigner table extensions Availability: by arrangement Storage location: Hochheim

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 15 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable, Top and bottom Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Dowel diameter: 8 mm Dowel length max: 40 mm Safety device: enclosed cabin Milling for fittings: Lamello Clamex Interface for .dxf data: Yes Control: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP, HOMAG tapio ready, HOMAG WOODWOP 8.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 18 kW Weight: 3.975 kg Space requirement Length: 4,8 m Space requirement Width: 2,4 m Fsln Ujwa Skbe U Eijpg Space requirement Height: 2,5 m

Condition: used, Year of construction: 2009, Used machine Year of manufacture 2009 Condition: workshop overhauled, well maintained Equipment and technical specifications: - CE mark - Working height 8-60 mm - Glue thickness 0.4-12 mm - Rotating control panel with "StarTouch" PLC line control, 12" color touchscreen including "Telesolve" remote maintenance and diagnostics - Anti-adhesive spray unit in front of the milling unit - Pre-milling/joining unit "RT-E" with 2 high-frequency motors, DIA cutters, and "EASY-SIZE PLUS" device (electronically controlled infeed guide) Fpelnowhulde U U Eiog - Glue unit "VC 1000" up to 12 mm thickness with pre-melter (replaceable rapid heating tank, Teflon coating, with second glue tank for PUR glue) - Nitrogen storage box for PUR glue tank, fill level monitoring with sensor, "iGlue" kit for control Glue container above the desk - Cross-cut saw unit "K/SEL" with horizontal adjustment, two independent high-frequency motors, pivoting with tracer rollers and extraction hoods on both motors (controllable from the desk) - Tiltable flush trimming unit "RI/1000" 0-20° tiltable, pneumatic positioning, two independent high-frequency motors, high-performance extraction hood "ED-SYSTEM" (controllable from the desk) - Rounding unit/corner rounding unit "ROUND K" with "4 Edge" KIT, pneumatic positioning from the desk for quick edge thickness changes, two high-frequency motors, tracer rollers, unit runs on prism guides with ball-bearing pressure pads, R=2.5 mm - Scraper unit "RAS/V" with tracer rollers, R=2 mm - Sprayer for finishing, in front of the flat scraper and brushing unit - Flat scraper "RCL", tracer rollers, blower nozzles for cleaning Pneumatically controlled - "SPN" brush/buffing unit, 2 independent motors - Whitening unit/Leister hot air gun, with nozzles at the top and bottom - "AUTOSET" function, all necessary adjustments can be made from the control panel, pivoting of the miter saw blades, remote adjustment of the flush trimming units, 2 positions for the ROUND K unit, remote adjustment for the scraper unit, spacers on the infeed guide, electronic positioning of the upper pressure beam, electronic positioning of the pressure rollers, interior lighting of the cabin, all tools with reversible inserts, edge monitoring sensor, all important units are application-controlled, automatic central lubrication of the feed chain - Former list price: €104,250 Location: Langen Availability: Short term

Year of construction: 2015, Condition: used, STORE-MASTER 5110 automatic panel storage system used Built in 2015 Was a demonstration unit from Holz Her and only went into production with one machine in 2019 30% to 50% space savings Minimal distances between stacks (from 70 mm) = optimal use of space Excludes panel damage, panel separation control with weight measurement Fully automated process (storage/retrieval) and machine loading Adaptable for all panel formats (1.2 to 5.6 m) depending on options 90° panel rotation Low manipulator height External dimensions: Length 8.5 m, width 7.5 m Max. panel size 3.2 x 2.1 m Min. panel size 1.2 x 0.6 m Max. lifting weight 150 kg Stacking height 1.8 m, max. 2.0 m m Max. lifting height 2.1 m Fjln U U Eevdyv Ieiopg Travel speed: Horizontal approx. 120 m/min Vertical approx. 45 m/min. Manipulator suitable for slightly air-permeable, smooth materials such as: e.g., coated chipboard, blockboard, raw MDF, raw HDF, raw particle board (good quality) Upgrade: Vacuum capacity for suction cups on the manipulator 100 m³/h for a mixed material in the warehouse, such as MDF and raw chipboard Connected load 6 kW Vibration-damped portal bridge, manipulator head with lifting device, and steel gripper arm, space-saving due to its low design Articulated arm design with direct drive via steel belt therefore wear-free and insensitive to vibrations Electronic panel position measurement Panel rotation correction The panels are measured with sensors and neatly stacked Separation device for thin panels via integrated weight measurement Storage and retrieval location Direct loading onto the machine Warehouse software Former list price: €110,000.00 € Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 1984, Used Machine Year of Manufacture: 1984 Universal dowel drilling machine with a pivoting drilling unit with fully automatic control with two pneumatic safety clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Weight 420 kg Availability: Short term Foln U U Ejkwg Rcoijpg Location: Flörsheim