Condition: new, How does it work? The magazine is manually fed with deck boards and stringer boards, then the machine automatically organizes the decks in the right position for nailing. The machine is constructed for continuous and reliable production of pallets. It combines professional precision with a user-friendly setup. The size of the manufactured pallets can be easily readjusted in just a few minutes. Deck Size: Min / max length: 600 mm - 1 600 mm Min / max width: 600 mm - 1 400 mm Stringer Min / max length: 600 mm - 1 400 mm Min / max width: 75 mm - 150 mm Min / max thickness: 16 mm - 28 mm Min / max wing: -20mm - +50mm Deck board Min / max length: 600 mm - 1 600 mm Min / max width: 75 mm - 150 mm Min / max Thickness: 16mm - 28mm Specifications: Operators | 1 Length | 4,0 m Width I 3 m excluding platform ladder Height | 3,6 m Power | Electric: 14 kW, 3x400 V+N, Hydraulic: 22 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 400L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 24 deck boards/min Standard equipment: 2 cassettes for deck boards 3 channels for stringer feeding 3 cassettes for stringer 1 mechanical clinching plate Cgobswdurpsu S T I Det Nailing system: Electric or hydraulic beam nailing, 1 nail box (9 nails), Individual nail picking, nail indication system, 9 nailing hammerheads Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised Cgsbu S T Iswd Nx Do Det - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: good (used), Functionality: fully functional, Machine type: Vertical wood band saw, heavy cast iron construction Manufacturer: PFAFFENBACH Model: HBS 600 Year of manufacture: approx. 1978 Condition: good Type of offer: used machine Technical specifications: Thrust: 592 mm Cutting range: max. cutting height 240 mm Cjbu S Tjwfnhme I Dogt Drive: 2.2 kW Note: Pivoting table 750 x 640 mm, stop, 2 spare saw blades Weight: 500 kg The machine is in good, ready-to-use condition and can be inspected and demonstrated at our premises. We would be pleased if you are interested in our offer. Errors, changes, and prior sale excepted.

Condition: used, Year of construction: 2017, Workpiece width max: 1.200 mm Workpiece length max: 13.500 mm Aggregates total: 1 Number of sawing aggregates: 1 Cgobuev Tqvws S T I Det Number of milling aggregates: 1 Mortising aggregates: 1 5-axes technology: Yes Automatic marking: Yes Labelling: Yes Workpiece feed: clamp gripper Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 35 kW Weight: 17.000 kg Space requirement Length: 32 m Space requirement Width: 6 m Space requirement Height: 4,5 m

Condition: used, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria Cgobu S T Ieu T Hrvj Dst - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: new, Semi-automated nailing machine for production of complete pallets in two steps. How does it work? Blocks and leg boards are fed manually in the left fixture. The machine nails the parts together automatically. The ready-made legs are moved by hand to the right fixture, where deck boards are manually placed on top of the legs and nailed together automatically. Both fixtures run simultaneously. The machine starts by pushing a button and the finished pallets are manually pushed out in the back of the machine. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Pallet size: Min / max length of deck & legs: 600 mm - 1 600 mm Min / max width of deck: 600 mm - 1 300 mm Specifications: Operators | 2 Length | 3,5 m Height | 3,6 m Power | 14 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 300L/min Should be filled and controlled | Container for lubricating oil Machine capacity | 500 pallets/8h Standard equipment: 1 channel for legs 1 channel for pallet assembly 1 pallet matrix interchangeable 1 leg matrix adjustable Operators terminal for production control Program for saving nail positioning Cgebu S T Ijl Awy Ds Dot Nailing System | Hydraulic beam nailing, 3 nail boxes, 30 nailing hammerheads

Condition: used, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Cgebsu T Hrieu S T I Det Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet

Condition: used, -Large planing tables made of gray cast iron -The planing table is adjusted using a precise parallelogram system, ensuring that the distance between the table tips and the cutter block remains constant in every adjustment position. -The large, sturdy planing stop made of anodized aluminum is easily movable and can be tilted from 0° to 45°. -The angle of the stop can be read from the workstation. -Comes with auxiliary stop as standard. -Large four-knife block with precision bearings. -Smooth operation thanks to the precision unit and the heavy-duty cast iron construction. -Powerful industrial motor. -Maximum user safety with simple operation. -Scale display for chip removal. -Manual table adjustment. -Motor protection switch. Equipment details. Cgjbsu T Hrcju S T I Dst -Incl. Foldable auxiliary stop for narrow workpieces -Manual quick adjustment of the chip removal with scale & clamping head The guard -The guard is foldable and designed to not hinder the operator while working, while simultaneously protecting them. TERSA models with Tersa planer knife shaft system -No more adjustments or screwing -Planer knife changes in seconds -Self-locking -Extremely quiet -Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planer: - Total length of tables: 2720 mm - Work table length: 1498 mm - Maximum chip removal for planer: 8 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2750 mm - Space required (width/depth): 1604 mm - Explanation Space requirements: The dimensions take into account maximum travel distances or usable lengths. Electrical specifications: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm

Condition: used, -Sturdy steel and gray cast iron construction -Large, ribbed gray cast iron planing tables -Smooth operation due to high weight -Four feed speeds -Motorized thicknessing table lift with two speeds and digital display -Articulated pressure bar in the infeed -Precision-mounted four-knife shaft -Helical-toothed steel feed roller for particularly even and gentle wood feed -Rubber-coated feed roller -Large planing stop, tiltable from 90 to +45° -Standard auxiliary stop -Powerful industrial motor -Pneumatic quick-change system with pneumatic raising and lowering of the planing table -The extraction connection position is always in the same place for both planing and thicknessing, eliminating the need for an additional extraction hose or the need for cumbersome reconnection and repositioning around the machine required Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Planer: - Total length of tables: 2300 mm - Work table length: 1200 mm - Planer table width: 520 mm - Working height: 930 mm - Max. chip removal for planer: 6 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45 ° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: - Thickness table width: 520 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 250 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm Cgebuou T Hq Se S T I Det - Maximum planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, -Motorized thicknessing table lift with two speeds -Numerical display for working height -Gray cast iron thicknessing table -The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision -Four feed speeds -Optional with two rollers in the thicknessing table -Standard with noise protection and chip protection curtains at the workpiece inlet and outlet Cebusu T Hq Ej S T I Dogt -Adjustable roller contact pressure -Front feed roller with helical gearing -Rubber-coated feed roller -Powerful industrial motor Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter, thickness: 150 mm Installation information: - Space required length: 1305 mm - Space required width/depth: 1080 mm - Space required height: 1197 mm - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of the working area: Please add the specified dimensions to the space required to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 300 mm - Minimum working length (thickness): 210 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 4500 rpm - Maximum planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, Vacomats are mobile dust extractors that extract Cgjbu S Tsu T Dv Es I Det large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: used, -Sturdy steel and gray cast iron construction -Dynamically balanced milling unit anchored to the work table -Extremely robust construction -Smooth operation thanks to precision units and high dead weight -Comes with right-hand/left-hand rotation and electronic locking when changing direction as standard -Five speeds from 3000 - 10000 rpm -Speed changes are easily and conveniently performed from the machine side -Comes with an MK 4 interchangeable spindle system as standard -Large gray cast iron work table for lasting precision -Easy handling thanks to controls and a speed display on the front of the machine -Large milling stop with fine adjustment and aluminum stop jaws as standard -Stop adjustment via crank handle -Numerical display of the set spindle height, accurate to within a tenth -Powerful industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Weight (net) approx.: 510 kg Extraction connection: - Number of extraction nozzles: 2 - Extraction nozzle diameter: 80 mm - Number of extraction nozzle stops: 1 - Extraction nozzle stop diameter: 120 mm Work table: - Work table length: 2500 mm - Work table width: 810 mm - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the space required to determine the recommended free space for the machine. Features: - Router stop: Heavy-duty professional design with aluminum stop jaws and fine adjustment, adjustable from the front via a crank with a numeric digital display - Curved router guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Controls: manual height and tilt adjustment of the router unit Csbou T Hhksu S T I Dogt - Position of control elements: on the machine body - Table design: table extension left and right and extendable workpiece support (total width 2500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Router spindle: - Spindle tilt: -45 – +45 ° - Usable spindle length: 140 / 180 mm - Explanation of usable spindle length: for spindle diameter 30 – 35 / for spindle diameter 40 – 50 mm - Milling spindle stroke: 90 mm - Changeable spindle: MT 4 - Spindle speed(s): 3000/4500/6000/8000/10000 rpm Maximum milling tool diameter: - Maximum lowerable tool diameter: 320 x 60 mm - Maximum tool diameter for profile milling: 250 mm - Maximum tool diameter for tenon milling: 350 mm - Maximum tool diameter for form milling: 160 mm

Condition: used, - Edition Partnership - With our TF 100 2.0 "Partnership Edition" we offer CNC technology for the highest demands. And at a sensational price. Drilling, grooving, milling Cjbu S T Ieu Tiwvo Dsgt Unique in operation and in the "Partnership Edition" even more so in terms of features: The TF 100 2.0, specially developed for furniture and interior TF 100 2.0, specially developed for furniture and interior than 5 m² production area, it can perform drilling 5 levels of the workpiece, groove sawing work and also milling work. The machine impresses with its extremely high processing speed with maximum precision and ease of operation. The standard pre-equipment for angular gears, the optional the optional CLAMEX and lock case milling cutters can be can be retrofitted easily and at any time. The TF 100 2.0 "Partnership Edition" is completely manufactured in in our large factory in Rimini, the headquarters of Masterwood, and is 100% "Made in Italy". ----- Technical data ----- Max. workpiece length X: unlimited, max. workpiece length Y: 1,000 mm, max. tool thickness Z: 60 mm, Vertical spindles X - direction: 5 pieces, Vertical spindles Y - direction: 5 pieces, Horizontal double drilling spindles X - direction: 2 + 2 pieces, Horizontal double drilling spindles Y - direction: 1 + 1 piece, Units: 16 drill head, Drilling spindle speed: 4,000 rpm, Distance between drilling spindles: 32 mm, Motor power: 1.7 kW, Grooving saw: X - direction, Saw blade Ø: 125 mm, Extraction connection Ø: 150 mm, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Csbsu R Tb Usu S T I Dogt Connection piece: 350 mm, Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, Suction collector Suction bell -used- Csbu S Tju R S Uys I Dsgt ----- Technical data ----- Connection piece: 300 mm, Nozzle: 5 pieces, nozzle diameter: 160 mm

Condition: used, Suction collector Suction bell -used- Csbu S Teu R S Ugj I Dogt ----- Technical data ----- Connection piece: 300 mm, Nozzle: 5 pieces, nozzle diameter: 140 mm

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, Cobu Sou R S I Ho T I Degt carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V

Condition: used, Gun cleaning device MARX PWA 900 -used- Cgebuou R Tfaj S T I Djt Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Dimensions (LxWxH): 670 x 510 x 370 mm, Compressed air: 6 bar

Condition: used, Feed unit MAKA -used- infinitely variable feed speed Cobu S T Ieu R S R Uj Dogt ----- Technical data ----- Rollers: 3 pieces

Condition: used, Drilling machine FLOTT TB 10 -used- Bench drill, incl. base cabinet, swivel drill head ----- Technical data ----- Number of speeds: 5, Cgjbsu R Td Asu S T I Dst Drehzahlbereich: 480/730/1160/1800/2800, Drill chuck: 1-13, Dimensions (LxWxH): 500x6001400

Condition: used, Jointer COMAG -used- Cgebuou R S Uas S T I Djt ----- Technical data ----- Planing width: 510 mm, table length: 2,520 mm, Planer shaft diameter: 120 mm, Number of knives: 2 pieces, Suction nozzle: 140 mm

Condition: used, Frame sanding machine LÖWER RSM 280 SX -used- Frame sanding machine sanding pad, oscillation, frame sanding device, feed belt, belt cleaning ----- Technical data ----- Sanding width: 190 mm, max. workpiece thickness: 120 mm, Speeds: 6,11,16 m/min, Cgobu S T Iju R Tbhj Djt Motor: 5.5 kW, weight: 550 kg

Condition: used, Extraction fan / blower NESTRO -used- Cjbu S Tsu R S Igj I Dogt Steel fan wheel ----- Technical data ----- Pipe diameter: 300 mm, motor: 7.5 kW

Condition: used, Table router MARTIN -used- finely adjustable milling fence, right/left rotation ----- Technical data ----- Table size: 1,000x930 mm, Worktable height: 860 mm, Spindle diameter: 40 mm, Cjbu S T Isu R Td Ne Degt Useful length of milling spindle: 160 mm, max. cutter diameter: 255 mm, max. retractable cutter diameter: 255 mm, height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction nozzle Ø: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mm

Condition: excellent (used), Compressor AIRCRAFT ACS 3,5-10 -used- ----- Technical data ----- Cgjbueu R S Slo S T I Dot Effective delivery rate: 360 l/min, Maximum pressure: 10 bar, Motor: 3.5 kW, Speed: 2,880 rpm, Weight: 45 kg Quality info: - Complete basic inspection - Complete basic cleaning - electrics checked - ready for immediate use