Condition: used, Year of construction: 2016, 2016 Gannomat Index 1300 CNC Drilling and Dowel insertion machine. Dehx Dovyhaajdrdsut 4 x working zones. Single drill spindle. Single dowel insertion head. Available for any demonstration. Gluing unit is fitted to the machine, but this is not working. With the exception of gluing, the machine works well.

Condition: used, Year of construction: 2002, Number of saw blades: 1 Vertical saw blades: 1 Roller diameter: 940 mm Number of feeder rollers: 1 Saw blade width max: 80 mm Saw blade length max: 6.580 mm Passage height max: 560 mm Opening width: 910 mm Main motor power: 5,5 kW Type: left-side machine Saw blade: Vertical Feed rollers: Vertical Roller guidance top: Yes Dehx Djwfraysdrdjut Roller guidance bottom: Yes Electrical feed: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Djhx Ddjxfwdsrdjut Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2010, Functionality: fully functional, Holzma HPP 350/43/43 panel dividing saw in good, fully functional condition. The machine will be in operation until the beginning of July and can also be inspected while powered up. Cutting length: 4300 mm Cutting width (program slide travel): 4250 mm Roller rail (10-track element): 1 piece Roller rail (2-track element): 5 pieces Collets: 7 pieces 4 air cushion tables Technical specifications: Saw blade projection: 80 mm Saw carriage feed: forward 1-130 m/min, reverse constant 130 m/min Automatic cutting height adjustment; Angle clamping device, minimum clamping width: 0 mm; Maximum cutting width, complete cutting length Duehx Ddev I S Ausrdjt Space required: 640 x 740 cm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Connected load for 13.5 kW HS motor: 20 kW CADmatic 4.1 Professional control system with 19-inch flat-panel display with touchscreen function

Condition: excellent (used), Year of construction: 2011, working width 430mm max height 100mm Dehxen Arm Ee Ddrdsut outfeed conveyor 3500mm variable regulated brushes speed variable regulated rolls speed year 2011

Condition: ready for operation (used), Year of construction: 1992, Additional Equipment Center Guide (Roller Conveyor) to Support Wide Workpieces Existing Tools for the Machine Included Dehjwdy Ucsx Ddrdjut This HOMAG WEINMANN FLO 23 double sided edgebander was manufactured in 1992. Ideal for efficient edgebanding processes, it represents a practical addition to any woodworking shop. Contact us for more information. Application Types Edge Banding

Condition: used, Year of construction: 2016, Functionality: fully functional, 2016 Gannomat Concept 70 Eco Carcase Press. Machine in good working order and any demonstration can be arranged. Leg Extensions to raise the working height. Air-Jet table to ease movement of cabinets inside the press. Infeed / Loading table with rollers. Outfeed table with rollers. Fully adjustable pressure on both vertical and horizontal. Automatic timer for the pressure. 3 x speed adjustment on axis movement. Dehx Ddrovygz Nsdeut The configuration of this machine allows the throughfeed process to be introduced increasing efficiency within your factory.

Year of construction: 2019, Condition: used, Element length max: 12.000 mm Element width max: 3.800 mm Element thickness max: 500 mm Moulding aggregates: 1 Duohxsv S D D Sj Ddrdjt C-axis: Yes 5-axes technology: Yes HOMAG Flex 5 interface: Yes Main motor power: 18,5 kW Tool changer: Yes Tool changer positions: 12 Saw aggregate: Yes, C-axis Framing station: Yes Number of tables total: 2 WEINMANN BUILDTEQ A 550: Yes WEINMANN BUILDTEQ A 570: Yes Outfeed table: Set-up table Reversing table: Yes WEINMANN SCHMETTERLINGSWENDER: Yes Scribing: Yes Workpiece probing: Yes Arrangement: Horizontal Control: Homag powerTouch, HOMAG POWER CONTROL PC 86 Software: SCHULER MMR PROFESSIONAL, HOMAG WOODSCOUT, WEINMANN WUPEDITOR, WEINMANN WUPVIEW, WEINMANN WUPWORKS, MICROSOFT WINDOWS 7 Conformity marking: CE mark

Condition: new, Year of construction: 2024, Availability upon request Dohxod Nm Sis Ddrdjut Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary Dohjvu Hfqsx Ddrdeut (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: ready for operation (used), 7.5Kw motor Carriage length 320cm Carriage with variable angle Variable angle scoring saw Height adjustment electric Angle adjustment electric Clearance 145cm Dehx Dswinakedrdsut

Condition: excellent (used), Excellent condition Intermediate filter with rotary valve Ring line to the silo Fan 30 kw 10,050 m3/h Soundproof box 400 mm intake pipe Dshowfgauox Ddrdjut

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm Duohx Ddjq Auhdsrdot

Year of construction: 2001, Condition: like new (used), Carbide saw side grinder Petschauer model FL600 year 2001 Dohx Dded Emc Uerdout

Condition: good (used), Year of construction: 1992, Altendorf F 45 sliding table saw, built in 1992 Motor: 5.5 kW / 400 volts Cutting length: 2800 mm Cutting width: 1000 mm Pivoting up to 45° Speeds: 3, 4, 5, and 6000 rpm Max. saw blade diameter: 450 mm Max. cutting height: 155 mm Parallel guard Fine adjustment on the parallel stop Miter stop 800 mm aluminum table extension Dohx Ddrowhpngjdout

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Duehx Defzbqysdrdst Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: not inspected (used), Year of construction: 2009, Wide Belt Sander Format4 Finish1302 Year of manufacture 2009 Touch display Sanding height approx. 3 - 170 mm Sanding width approx. 1300 mm 2 sanding units (individually controllable) Air cushion Program storage possible 22 kW motors (2 motors - separate for each belt!) Duohx Ddswdpldsrdjt Weight approx. 2.3 tons Only solid wood or veneer was sanded - no painted surfaces or anything else! Instruction manual and key included! Shipping available upon request for an additional charge! Machine can be inspected! By appointment! Location: ex warehouse, 54634 Bitburg - available immediately - Sold without warranty - without guarantee - free shipping -

Condition: good (used), Double edger with two electrically adjustable saw blades Max. cutting length 4.2 m Max. cutting width 0.6 m Plane alignment via joist lock and cross chains in the table Djhx Ddjwinbnjrdeut Cut gap indication via laser

Condition: used, Ganner Selekta 252 TR dowel insertion machine for automatically gluing and driving round dowels into prepared holes. The machine is ideal for efficient dowel joints in furniture and cabinet construction and offers high repeatability in series production. Dowel diameter: 8 mm Dowel length: 20–50 mm Dehewd Iiusx Ddrdjut

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll Dujhx Ddrjtp T Dtodjt * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: like new (used), Kaeser with attached dryer, 8 bar, 2017 with maintenance history and documents. 13000 hours total Dehswhgczex Ddrdeut

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box Dehxsfydzbs Ddrdout • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Djhxov A Ains Ddrdeut Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters Dujhx Ddrswdny Tjdjt 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Max. cutting length 3100 mm Functionally tested Duehx Ddjwimduerdst