Condition: used, Year of construction: 1987, With this roll press, you can Ijdpfxjwd Nx De Aaajtp press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Itedpeu Hldmofx Aaasp Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Itodpfexwz H Rsx Aaajp Location: Hesse

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 Itodpfxexlqpds Aaaep - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Isdpfxoxtgmho Aaajtp Application Types Pressing / Laminating

Condition: good (used), Code: 0163 Brand: ITALPRESSE Model: MEC 4/B Itsdpowzbfwjfx Aaajp Hydraulic hot press with water heating for veneer, panels, furniture, custom-made furniture, doors in wood, composite materials, aluminium and various Technical data: Platen dimensions mm 2500 x 1300 Opening mm 300 N° 4 cylinders Total pressure ton 60 Motor power Hp 1,5 Platen heating by water Boiler Perimeter emergency rope Overall dimensions mm 3100 x 1610 x 1830 h Weight kg 3000

Condition: used, No. 3197 Isdpsvvm Iujfx Aaaotp Vertical log band saw Bögli 1600 Used, the machine has been continuously maintained and modernized Sawing operation was discontinued in summer 2024 For logs up to 1500 mm in diameter Clamping carriage approx. 7650 mm long, 5 support arms Clamping carriage approx. 3000 mm wide The maximum length that was cut is 8000 mm Cutting capacity averaged 55 - 70 solid cubic meters per 8.5 hours 2 core cut-off saws Drive motor 55 kW, 1460 rpm Roller diameter 1600 mm Saw blade maximum width 205 mm, length 10560 mm, thickness 1.65 mm Hydraulic unit replaced in 2007 Chip carriage rollers and shafts replaced in 2011 The system was operated by 3 people Operator cabin with remote control and video surveillance Space requirement approx. 25000 x 10000 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in the description and price reserved In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, volume flow: 1,500 m³/h, negative pressure: 2,100 Pa, intake manifold diameter: 140 mm, overall weight: 345 kg, input voltage: 380 V, space requirement width: 750 mm, space requirement length: 1,320 mm, space requirement height: 1,905 mm, Spänex mobile extraction unit SMU-R15 Year of manufacture: 2020, unused, 2.2 kW 140 mm Ø extraction nozzle, 1,500 m³/h air flow 2,100 Pa negative pressure, 65 dB, H3 certified 165 l drum, dimensions: 1,320 mm length, 750 mm width, 1,905 mm height Weight: 345 kg Isdpfx Aswanf Usaaetp

Condition: used, Used machine Features and technical data: - Pressing area: 2500 x 1300 mm - With ELKOM gold-anodised energy-saving plates - Total pressing force: 80 t - Specific pressure: 2.5-3.0 kg/cm² - 6 pressing cylinders, each with 68 mm diameter - Opening width: 300 mm Dimensions: 3080x1550x1800 mm Iedpfx Ajxwz Iujaajtp Weight: approx. 4700 kg Availability: Approx. mid-April 2026 Location: Hesse

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Extraction diameter: 160 mm Itsdpfx Ajrbiiwoaajp Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Minimum air flow: 1447 m³/h 3.4 kW Automatic, motor-driven filter cleaning

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: - Planing width: 410 mm - Min. thicknessing height: 3 mm - Max. thicknessing height: 240 mm - Max. cutting depth: 7 mm - Number of knives: 3 pcs. Tersa knives - Thickness table adjustment: mechanical - Thickness display: mechanical - Motor: 4 kW Itedoxwz Izopfx Aaajp - Feed speed: 6/12 m/min - Infeed roller: steel - Outfeed roller: steel - Extraction port diameter: 120 mm Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Used machine Equipment: Ijdpfoxwz Nlsx Aaastp with 4 bags with fan Price for self-collection including various piping components Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Used machine Isdpfx Aexwz N Eoaaotp Availability: approx. mid/end of January 2026 Location: Hesse

Condition: used, Year of construction: 2013, Used machine Itodpfxjxwz Nre Aaaop Year of manufacture: 2013 Condition: well-maintained Equipment and technical data: - Planing width 520 mm - Heavy cast iron tables - Soundproofed - With TERSA cutterblock - Pneumatic quick-change system - Motorized thickness table lift with LED digital display - Swivelling aluminium auxiliary fence - Pneumatically operated cutterblock guard - Folding safety cover - Combined extraction hood for both planing modes D=100 mm - Pneumatic maintenance unit - CE mark Availability: approx. mid/end of January 2026 Location: Hessen

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Equipment and technical data: Manufacturer’s information: "Achieving optimal work results begins with precise, continuous processes, accurate working methods, and reduced tolerance for errors. The result is quality down to the last detail — and our processing machines are designed to meet your professional standards. That’s why we have developed a drilling and fitting insertion machine that makes operation and adjustments even more user-friendly — MINIPRESS top. New features enable quick and precise handling, improving your workflow for increased accuracy, efficiency, and quality. Combined with EASYSTICK, the MINIPRESS top offers an optimal package for all drilling operations on carcasses, doors, and fronts. EASYSTICK is the automated, easy-to-adjust stop system for drilling and fitting insertion machines. From rapid and easy machine setup through to perfect results, your entire process is optimized: the drilling positions are determined digitally, the stops move automatically and guide you step by step to the correct positions: place the workpiece, drill, finished! Ijdpfx Aoxwz Iboaastp With EASYSTICK, planning and processing on the MINIPRESS top are digitized. You can plan directly at the machine or import your project data from the cabinet configurator quickly and easily via WLAN or USB stick. The imported production data can be accessed and processed directly. The EASYSTICK computer also allows you to make processing settings directly on the MINIPRESS top. Enter carcass and front dimensions, select fittings: EASYSTICK automatically calculates the drilling positions for you. Thanks to EASYSTICK, the MINIPRESS top automatically controls the stop positions. The drilling carriage travels along the Y-axis automatically while the worktable and fence remain stationary — simple to set up and precise. With the MINIPRESS top, you can achieve a reach of up to 350 mm by moving the drilling carriage. This allows, for example, centered rows of holes even with deep cabinets. With the MINIPRESS top, you only need one machine for all vertical and horizontal drilling operations. The horizontal boring unit of the MINIPRESS top allows for precise construction drilling, e.g., for dowels and connectors. The horizontal boring unit is easily accessible and straightforward to adjust and operate." - with 9-spindle line boring head, 32 mm pitch, with positioning pin - with horizontal boring head (3 spindles) - with gearbox for furniture hinges (3 spindles) - with gearbox for straight mounting plates, cabinet connectors (2 spindles) - with gearbox for carcass rails/front fittings (8 spindles) - with extraction set, 125 mm Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: smooth operation Spindle MK 3 Motor: 400 V, 0.55 kW Availability: approx. mid-April 2026 Storage location: Hesse Itjdpfxoxwz Nfe Aaaep

Condition: used, Used machine Data to follow Itodpfx Aoxwz Rpoaajp

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical specifications: - Cutting length: 3400 mm - Cutting width: 1300 mm, CNC-controlled - Motor: 5.5 kW - Automatic brake - Digital display for cutting width - Digital display for tilting - Digital speed display - Digital display for mitre fence - Scoring unit: electric H+S F45 - RAPIDO scoring system - Automatic guard control - Parallelogram guard device F45 - Table extension: 800 mm - CE version - Anodised version Availability: approx. mid-April 2026 Location: Hesse Ijdoxwz Inspfx Aaaotp

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Belt dimensions: 2600 × 200 mm - Worktable: 935 × 460 mm - Auxiliary table at belt tensioning roller: 350 × 350 mm (with round sanding attachment) - Sanding spindle with rubber rollers, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with separate, maintenance-free oscillation motor - Table height adjustment via handwheel, additionally adjustable relative to the sanding belt (forward and backward) - Sanding unit tiltable from -10° to 90°, pivoted via handwheel with digital angle display - Precise angle accuracy ensured by mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer device - Quick changeover from veneer to solid wood sanding Ijdsxwz I Iopfx Aaastp - Height-adjustable idle disk table with adapter for dust extraction at the belt tensioning roller - Large-dimensioned mitre fence with stepless angle adjustment and movable ruler - Extraction: adapters Ø 100 mm on both sides (idle disk table, right and left extraction hoods) - 2 sockets 400 V on the machine base (for machine and feed unit) - Torsion-resistant, solid steel base for high running smoothness and stability - Large worktable with sliding surface - Recess in machine base for pallet truck for easier internal transport Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment: Iodpexwz Nxsfx Aaaetp With interchangeable boring units for: - Line boring - Hinges - Mounting plates - Connecting fittings - Front fixings Line boring unit can be rotated 90° for use. Availability: approx. mid/end January 2026 Location: Hesse

Condition: used, Used machine Itjdjxwz Rvepfx Aaaop Data to follow

Condition: used, Used machine Equipment and technical data: Table size: 2600 x 900 mm Max. usable grinding length: 2500 mm Belt length: 7100 mm x 150 mm 1100 mm throat on right Motor: 5.2 kW Dimensions: 4300x1650x1800 mm Weight: 620 kg Availability: approx. mid/end of January 2026 Location: Hesse Itedjxwz N Sjpfx Aaaep

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical specifications: Iedpoxwz Rcjfx Aaaotp - Spindle clamping length: 180 mm - Spindle tilt: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilt - Motor: 5.5 kW - Table size: 1200 x 730 mm - Largest table opening: 420 mm - Motor brake - Speeds: 3000/4500/6000/7000/10000 rpm - Speed display - Extraction port: 125 mm - With Aigner integral fence - With 3-roller power feed Availability: approx. mid/end of January 2026 Location: Hesse

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Iodoxwz Ihspfx Aaaetp Condition: well-maintained Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face - Swivel: 0–90 degrees via handwheel - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Storage location: Hesse

Condition: used, Used machine Equipment and technical data: - Vertical spindle travel: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3500 - 7000 rpm - with fixed spindle - Motor: 2.5-3.1 HP - Table: 830 x 700 mm - Slotting discs up to 340 mm - with Aigner integral fence - with 3-roller feed Weight: 240 kg Availability: approx. mid-April 2026 Itjdpfxexwz I Uo Aaasp Location: Hesse