Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device Folq Neg Hkmrj Dxropg - Chip tray, extendable - LED machine light - Operating tool

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Fjlelxpfmeq N Dxropg Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: B (FP 2) reconditioned with CE geometric acceptance with test report with guarantee Foljdvdczeq N Dxrepg Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: A (FP 1) reconditioned with CE geometric acceptance with test report with guarantee Folodvdc Ioq N Dxrepg Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: new, Short and length grinding machine Brand HERZOG Model LY 600 400V version Fpolq N Dsd Idb Iexreg Length tolerance: ± 0.01 mm Angularity: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup wheel and cutting wheel - Operating instructions

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new Fpjlq Njd Tytys Dxrjg - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Fpelq Nofzbtms Dxrjg Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Year of construction: 2021, Condition: new, Graver Grinding Machine Make: HERZOG (AMA) Folegllp Ueq N Dxropg Model: Pregraph U2 Condition: New machine with warranty - for grinding of gravers, pins, punches and round parts - robust, durable construction - versatile application possibilities - motor protection and restart protection accessories: - Extraction tool, through axial adjustment of the disc, the previous setting is setting is retained - Machine light - Operating tool - Grinding wheel with flange - Operating instructions

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) Fpslq N Deh Rv U Eoxrog - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm Fpolq N Dsilg Hdexrog - coolant device - Operating instructions

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-7097 with guarantee Fpslq Nelfc U Ds Dxrjg geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: reconditioned (used), Year of construction: 1986, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1986 - partially overhauled, newly painted, RAL7035 light gray / RAL7042 traffic gray A RAL5008 gray blue Mach. No.: 2102-3014 Milling head type: 2171 Milling head number: 2955 Guarantee: 6 months single shift from delivery, on the mechanics partially overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Fpelq N Dxsr En D Iersg Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Universal table 590 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine is technically compliant with the state of the year it was built.

Condition: reconditioned (used), Graver grinding machine Make: Deckel Model: S0 Year of manufacture: unknown - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine number: unknown with guarantee Accessories: Fpelq N Dohvrugjxrog - grinding wheel with flange - operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Folq N Dsmgaddjxrspg Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1997, Surface grinding machine Make ELB-Schliff Model Perfekt 4 SPS-NK Year of construction: 1997 - partially overhauled, newly painted, RAL 7035 light gray / RAL 7012 basalt gray RAL 5012 blue-grey Machine no. 48.021 with warranty: Accessories: - Electro-magnetic clamping plate 400 x 250 mm pole pitch 5 mm with holding force control Fslqoqaz Ics N Dxrspg - automatic vertical infeed with infeed program with digital display for vertical and transverse movement - automatic central lubrication - Wet sanding unit with automatic paper belt filter for filter paper with 460 mm width x 200 m with filter density 0.016-0.025 mm - stainless steel rear panel - Electric straight line dresser with dimensional compensation with dressing diamond - Table stroke counter with the option of after a preset number of strokes to automatically dress the grinding wheel - adjusting elements - Operating instructions Used as seen The machine corresponds technically the status of the year of manufacture at that time.

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen Fpolq Nsub R R Sj Dxrsg The machine is technically corresponding to the state of the year of manufacture.

Condition: used, Year of construction: 1997, Vertical bandsawing machine Make: MÖSSNER Model: SM 320 Type A Year of manufacture: 1997, workshop tested machine no.: 29219 Fpjlor En D Ssq N Dxrsg Accessories: - IDEAL strip welding unit BSS016 with shears and grinding motor - Set (= 2 pcs.) HM band guides for saw band width 6 mm x 0.65 mm - Machine light - Wheel doors electrically secured - Foot switch on/off - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: new, Precision guidance and lathe Make: GDW Model: LZ 400 VS1 comfortline Condition: new machine with infinitely variable speed control Fpolq N Dxsdymdrjrsg and continuous regulation of feeding highest security standard Top width: 1000 mm centre height: 200 mm spindle bore: 62 mm Speed range: 0-4000 RPM equipped as standard with: The latest display is already in the basic price generation includes "comfortline", the many New features and Einfachheiten includes: -9 "TFT color display -Technology memory for 99 tools -oriented spindle stop via Teach-In button -Input of constant speed or constant cutting speed (V = c) -Speed limit can be selected Error - and status display in plain text -Feeding and thread pitch input using image-supported masks -With thread-cutting must not change gears thus more subject to change, or even be purchased in addition to all gänigen To be able to thread! Furthermore, it is included in the standard: LED light, integrated into machine casing -Quick-change tool holder size B with chisel holder -Lead screw shut-off with key -Brake device for main drive -Chuck guard can be moved with end switch monitoring -Chip back wall protection removable -Splashguard cover moveable -Removable chip Pan -Easy bed stop (stop longitudinal) -Central lubrication -Reducer socket for main spindle

Condition: new, Cut-off machine Make: MOTOM Model: TSM chuck clamping range 3 - 30 mm Painting grey Fields of application: Cutting of cylindrical tools Free grinding of tool shanks Surface grinding of tool faces Grinding of grooves Fpslq N Doguanmoxrjg Scope of delivery: Three-jaw chuck 85 mm (chuck passage 16 mm). CBN cut-off wheel for HSS (100 x 1.4 x 12.7 mm) Corundum cutting-off wheel for HSS (100 x 1.0 x 12.75 mm)

Condition: new, Bench drill Make: MAXION Model: ECOMAX 14 Condition: New machine spindle speed (infinitely variable): 420 - 2.100 rpm normal drilling capacity: 15 mm standard equipped with: Fsljbbd Dcjq N Dxrjpg - full motor protection - infinitely variable speed control - digital speed display - table adjustment via toothed rack - drill protection for quill diameter 60 mm - emergency stop button - operating instructions

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min Feljcuntzeq N Dxrspg standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: new, Bench drill Make: MAXION Model: UNIMAX 1 TAP Condition: New machine spindle speed (infinitely variable): 200 - 4.000 rpm normal drilling capacity: 18 mm Fjlqoci A S So N Dxrepg standard equipped with: - thread cutting device - digital speed display - digital drilling depth display - table adjustment via toothed rack - instruction manual

Condition: new, Column drilling machine Make: MAXION Felq Nsb Hl Irj Dxrepg Model: UNIMAX 3 Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - Full motor protection - reversing switch right/left rotation - digital speed display - table adjustment via toothed rack - drill protection - emergency stop button - instruction manual

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system Fpelq Nsdbgxcj Dxrsg -Change gears set -Oil -Control tool -Manual

Condition: new, Edge and contour milling machine Make: Assfalg Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: Fjlebhfzbsq N Dxrspg - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions