Condition: good (used), Year of construction: 1997, In good technical condition, built in 1997. Djln Nsvyrh Iom Nhskl

Condition: used, Year of construction: 2007, Useful cutting length: 3,200 mm Dksln Nm Newb U Tujhjl Available from May 2025.

Condition: excellent (used), Year of construction: 2016, ROBLAND Z 3200 format saw Dsln Nmjhtq Aqe Nhekl - DTR TECHNICAL SPECIFICATIONS: trolley length 3200 mm cutting width on the right side 1400 mm disc diameter max. 400 mm scoring unit diameter 125 mm 5.5 kW main engine 0.75 kW scoring engine height adjustment angle adjustment 0-45 ° three kinds of blade rotation speed 3000/4000/5000 RPM digital width display on the right 1800 mm / 2800 mm long rule two pawls broken guard additional guard for the disc for cutting at an angle table on an auxiliary trolley 700 x 150 mm stub diameter 80 mm and 160 mm dimensions (length / width / height) 340/150/140 cm weight ~ 1000 kg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: NR: 605.05.033.15, cutting height (max.): 133 mm, cutting width (max.): 800 mm, cutting length (max.): 3,200 mm, power: 7.5 kW (10.20 HP), saw blade diameter: 400 mm, pivoting range: 46 °, table width: 800 mm, height adjustment type: electric, cutting width at rip fence: 800 mm, Length stop 1 digital, length stop 2 manual, Xmotion control, electric parallel stop, protective hood also for miter cuts, Dsln Nswdgvysm Nhjkl

Condition: excellent (used), Year of construction: 2011, Cutting length 2,000 mm Cutting width 1,050 mm with manual adjustment and manual fine adjustment Manual height adjustment of the saw blade Angle stop, cutting lengths up to 3200 mm Dkeln Nop Duwcsm Nhel Drive power 5.5 kW with 3 speeds 3/4/5000 rpm. Cutting height max. approx. 140 mm Saw blade diameter max. 400 mm CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Motor power: 7.5 PS/HP (5.5 kW), cutting width: 800 mm, sliding table: 2500 mm, circular saw blade diameter max.: 315 mm, circular saw speed: 2000 6000 rpm, potential-free contact, variable speed Dkelnsvwl Dds Nm Nhol

Condition: ready for operation (used), Year of construction: 1994, Holzma HQP 11 Panel Saw Deln Nmjwdrh Io Nhekl The line is still connected and can be tested on site.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Raimann Multi-Blade Saw K47 Year of manufacture 1990 S/N 24745 Machine No. 94800 Manufacturer Interholz Raimann GmbH Technical specifications: Conveyor chain width 430 mm Shaft width 650 mm Maximum cutting height 120 mm Dkjln Nmev Rc Tve Nhol Saw blade diameter 350 mm Spindle diameter 60 mm Sleeve diameter 80 mm Minimum length 69 cm 37 kW main motor Shaft speed 3000 rpm Feed motor 5.5 kW Infinitely adjustable from 0 to 50 m/min Feed speed adjustable via inverter Centralized lubrication system Automatic spindle height adjustment Automatic roller height adjustment Upper take-off rollers Pneumatic tension rollers Centralized lubrication system Overall machine dimensions: Length 330 cm Width 225 cm Height 220 cm Weight 7000 kg

Condition: like new (used), - machine in stock - after a technical review - very good condition - ideal for the production of chairs   TECHNICAL PARAMETERS: - 7.5 kW main engine - two dugouts - pneumatic derrick control - pneumatic digging - wheel diameter 850 mm - 40 mm tape width - maximum length of the element 1300 mm - maximum width of the element 800 mm - maximum height 120 mm - two pneumatic side clamps - two pneumatic working distances Dkoln Nsd Dc E Ajm Nhsl - continuous feed regulation - hydraulic feed - 1.85 kW pump motor - receiving conveyor 180 mm x 2000 mm - 0.25 kW belt conveyor - central lubrication   Machine dimensions: - length 400 cm - 230 cm wide - height 250 cm - weight ~ 2000 kg

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Dkeln Njmmb Acsm Nhol Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Engine power: 13.0 hp/HP (10.0 kW), Year of manufacture: 2015, Format table guide system "X-Roll": Yes, Format sliding table: 3200 mm, Rip fence: 1250 mm, Safety devices: Top guard, Tooling compartment with space for 5 saw blades: Yes, Machine number: 604.07.005.15, School machine, , xmotion control, Foot pedal for swiveling away the top guard, Circular saw table extension 1620 mm behind the saw blade, Controll scoring unit with 3 controlled axes, Switching point on the sliding table, Controlled rip fence, Swivel device for outrigger table, XRoll outrigger with movable support rail Delneunu Tfe Nm Nhokl

Condition: new, Max. cutting height at 90° (mm) 140 with 400 blade Max. cutting height at 45° (mm) 97 with blade 400 Saw blade tilt (degrees) 45 Manual lifting and tilting of the saw blade unit Saw blade speed (rpm) 3700 Doln Nm Njit I Sbjhskl Scoring speed (rpm) 8500 Main motor power (kW) 50 Hz 9.0 with auto. Star/delta switch Scoring unit power (kW) 50 Hz 1.3 Format cuts (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Suction nozzle diameter (mm) 120, 80, 60 10-year warranty on the guide system of the saw carriage Trimming carriage with anodized aluminium profile with guide made of hardened, ground and flanged steel guides Height adjustment and tilting of the saw unit via handwheels on the front of the machine and display of the tilting via mechanical digital displays Trimming frame for quick positioning of the fence for mitre cuts - Telescopic fence with 2 fence flaps and scale in user direction - Telescopic support - Idler roller for panel loading and unloading 2 reversible stops on the longitudinal fence Table extensions in the outfeed Saw fence for parallel cutting complete with: - Cast iron support - micrometric adjustment and eccentric clamping device - Round guide made of ground steel, 45 mm diameter scoring unit with independent motorization adjustable from the outside and stops for easy saw blade positioning Emergency stop switch on the front Emergency stop switch on the side in the area of the rip fence (CE version) Thermal circuit breaker Saw blade pendulum guard with integrated extraction, extraction nozzle with DM 80 mm Automatic motor brake on the main saw blade Lockable main switch 110 V auxiliary circuit C.E. Declaration of Conformity incl. digital dimension display for the rip fence

Condition: used, Motor power: 7.5 PS/HP (5.5 kW), Cutting height (mm): 133 mm, Cutting width: 1250 mm, Format sliding table: 2800 mm, Parallel stop: Yes, Circular saw blade Ø max.: 250 400 mm, Electric height adjustment, Scoring unit standard, Crosscut stop with two digital jaws, including calculation of length compensation, Scoring status light, Controlled parallel stop, Tool compartment for 5 saw blades Djln Novwl Dwem Nhskl

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm Dkolod Akygsn Nm Nhjl scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: used, Engine power: 13.59 PS/HP (10.0 kW), Cutting height (mm): 200 mm, Cutting width: 1000 mm, Crosscut stop: 3200 mm, Format sliding table: 3200 mm, Parallel stop: Yes, Circular saw swivelling: 90-45 degrees, Circular saw blade Ø max.: 250 550 mm, Safety devices: Top guard, 2 stop jaws, Parallel stop with digital display, Swivelling device for outrigger table, Circular saw table extension up to 1620 mm behind Dkjln Nm Nsvwl D Djhjl

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: - Technical data without obligation, mistake and intermediate sale reserve. - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number). Dkjln Nsvbzpkem Nhjl

Condition: used, Engine power: 7.5 HP (5.5 kW), cutting width: 820 mm, cutting height (mm): 540 mm, upper and lower precision roller guide, table can be swiveled 20 degrees, cast iron fence on the table, height adjustment of the upper guide with handwheel, automatic blade tension control, belt length min/max: 6020/6120 mm, belt width min/max: 10/45 mm Djln Nmounu Txe Nhskl

Condition: excellent (used), Year of construction: 2017, Equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable Dslec Slxion Nm Nhjkl working table 1000 mm on right side from saw blade working table 1000 mm on left side of saw blade incl. 1 pcs saw blade DM 600 mm incl. side stopper on fence right side of the saw blade options: incl. additional work table 1000 mm right side of saw blade incl. additional work table 1000 mm left side of saw blade technical data: motor 9,0 kW saw blade DM 600 mm speed saw spindle 3000 RPM cutting capacity W 610 mm x H 30 mm W 380 mm x H 160 mm working hight over ground floor 850 mm working pressure 8 bar suction hoods 3 x 100 mm weight 450 kg compressed air consumption 8 NL/ cycle Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Engine power: 13.59 PS/HP (10.0 kW), year of manufacture: 2012, boom table: with degree grid index, format sliding table: 3200 mm, parallel stop: 1000 mm, tool compartment, spray device, stepless speed Dkolnsvwl Ezo Nm Nhol

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Dkeln Nmohvan Ij Nhjl Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Engine power: 3.0 PS/HP (2.2 kW), cutting width: 620 mm, cutting height (mm): 400 Deln Nevwl Atom Nhjkl

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: Dkoln Nm Noulzchehjl - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Dkeln Notwy Iuem Nhol Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! Dsln Nmog Dgr Ho Nhekl manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1995, Condition: excellent (used), cutting width 150 mm Min. cutting length 250 mm cutting height 45 - 200 mm cutting kerf 1,3 - 1,4 mm stroke rate 400 #/ min main motor 11 kW feed speed 0,2 - 2,0 m / min feed speed variable central lubrication system incl. saw frame incl. manual dimensions L x W x H = 2500 x 750 x 1650 mm weight 2200 kg Advise used machines: Delshriz Dsn Nm Nhekl • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)