Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, 1 complete automatic trimming system Paul 1 used Paul AB920 automatic feeding system consisting of: Transfer table with 1.1 m stroke; 6 m roller table; 9-strand conveyor chain drive Measuring device with 16 measuring points via measuring skids • NCD control and control cabinet • Control of the automatic feeding system and the BK/1000 with a saw blade adjustment Selectable: sharp edge / low wane / high wane - alignment centered or along the rear wane • Trimming grid: 48, 60, 80, 100, 120, 140 mm; • 150-400 mm in 1 cm increments • Single-track trimming with manual input of the trimming width Dkjb Eeulikmep Dhbjl 1 used Double Edger BK/1000L Max. cutting height: 125 mm • Feed with dual gear motor • Divided top roller • Hydraulic sawblade adjustment • Motor: 22 kW, 380 V, 50 Hz, 2900 rpm • Motor clamping rails • Fixed riving knife • Splinter separator 865 mm / 6.30 m long with fixed cutting blade and rising tooth chain for max. log length: 5.50 m • Total connected load of the system: 35 kW Saw shaft with new bearings

Condition: not inspected (used), Year of construction: 1990, Edger carriage travel: 3400 mm Saw blade pivots 45° Cutting height at 90°: 110 mm Dsb Epev U Nplj Dhbskl Motor: 4 kW Weight: approx. 960 kg

Condition: used, Engine power: 9.5 PS/HP (7.0 kW), year of manufacture: 2018, cutting height (mm): 136 mm, circular saw pivoting: 0 46 degrees, circular saw blade Ø max.: 400 mm, scoring saw Ø: 160 mm, sliding carriage 3200 mm, motorized parallel stop, control panel at eye level, digital display on ruler, Compex length compensation Dob Eovwl Amep Dhbokl

Condition: excellent (used), Altendorf F45 format saw 320cm carriage motorically adjusted blade tilt and top/bottom motorically adjusted right-hand side blade up to 1340mm 0.75KW scoring saw, 2-axis electrically adjustable 5.5KW engine max blade 450mm switches in carriage Dkob Ep Dhewar S Ssbjl used machine, very good condition, holds angles and fully fulfills its functions

Condition: excellent (used), Functionality: fully functional, saw blade diameter: 315 mm, cutting height (max.): 90 mm, cutting length (max.): 3,510 mm, type of input current: three-phase, OMS FC330R double saw for wood, aluminum 2 x 2.2 kW Specification: • condition - used, ready to work • manufacturer - OMS • model - FC 330 R • main engines - 2 x 2.2 kW • hydraulic-pneumatic control Dob Epjwbpt Ao Dhbjkl • max. cutting length - 351 cm • min. cutting length - 36 cm • max cutting cross-section - 90x160 mm (at a right angle) • max disc diameter - 330 mm (currently installed 315 mm) • extraction nozzles fi 60 mm • cutting at an angle in the range of -45 to +45 degrees (right, left) • clamps cut elements vertically • weight - approx. 800 kg • dimensions - 405 x 100 x 145 cm (length x width x height) Additional information: • very good, factory technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: not inspected (used), Year of construction: 1979, Functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Dkebev Uqa Ej Ep Dhbsl Cross table with stop Rip stop Scoring unit WITHOUT miter stop

Condition: excellent (used), Year of construction: 2018, operating hours: 6,000 h, Functionality: fully functional, machine/vehicle number: 1234TT90, saw band length: 5,150 mm, saw band width: 41 mm, total height: 2,000 mm, total length: 1,900 mm, total width: 2,200 mm, feed length X-axis: 600 mm, type of input current: three-phase, cutting speed: 8 mm/min, cutting capacity: 420 mm, cutting range round at 90°: 420 mm, cutting width (max.): 500 mm, table height: 880 mm, overall weight: 2,400 kg, cutting height (max.): 420 mm, conveyor belt speed: 50 mm/s, table width: 600 mm, table length: 1,800 mm, working height: 880 mm, workpiece weight (max.): 10,000 kg, input voltage: 400 V, coolant pump power: 1 W, Automatic band saw MEBER mod. SM420+CN, used, overhauled, 6-month warranty Delivered in April 2018 machine features: - cutting arch on square columns with linear bearings and tempered tracks - hydraulic bar feed with double speed - belt speed variator with vector inverter, Deb Epjwaxqbe Dhbokl - hydraulic cutting arch descent with balanced valve, with adjustable hydraulic thrust - motorized blade cleaning metal brush - blade development 5510 x 41 x 1.3 - double clamp, for reducing the end of the bar to zero - cutting capacity round diam. mm. 420 flat mm. 420 - computer for choosing the cutting length, no. of pieces, and any variation in cutting length on the same bar. - chip evacuator - automatic, hydraulic belt tension - automatic cutting arch height adjustment, with sensor - enhanced motor - reinforced reducer

Condition: good (used), Year of construction: 2011, cutting length (max.): 3,100 mm, saw blade diameter: 160 mm, cutting depth: 45 mm, overall weight: 17 kg, power: 1.49 kW (2.03 HP), Self-propelled, mobile panel saw Processing and cutting panel materials Djb Ep Douw Sbmjhbekl

Condition: used, Year of construction: 2013, Sawblade tiltable 45 ° Length of the rolling table 2050 mm cutting width 800 mm Dkjbevyuq So Ep Dhbol Motor output 4 kW

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 150 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC UKS 450 under-table cross-cut saw Cross cuts: 40x440 - 100x340mm - 160x120mm Max. cutting height: 170mm Dsb Epsrfudnj Dhbokl Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: used, Year of construction: 2001, No. 04450 Bandsaw MAKA HB 500 Used, year of construction 2001 Roller diameter 500 mm Table dimensions 680 x 515 mm LW Cutting capacity 300 x 480 mm HW Roll width 35 mm Blade length 3950 mm Motor power 1.5 kW Heavy steel box-form construction, balanced cast wheels APA roller precision guides Work table can be tilted up to 20° Machine mobile Transport dimensions approx. 1200 x 800 x 2000 mm LWH Weight approx. 300 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Dkeb Ep Dhovn Tl Dsbol Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Functionality: fully functional, Year of construction: 2025, load capacity: 1,500 kg, construction width: 1,200 mm, Rotator Load center of gravity: 500 Dkob Eeu D N Rfjp Dhbsl ISO class: ISO class 2 = 1,000 - 2,500 kg Technical condition: New Description: Rotator 205 degrees, for complete emptying of all containers, load capacity 1500 kg, fixed/folding support arm, incl. hoses & quick couplings available from stock

Condition: new, Boost Your Sawmill Efficiency with the Wravor Multirip Circular Saw 40-250! 🔥 Looking for power, precision, and productivity? The Wravor Multirip Circular Saw 40-250 is designed for high-speed, accurate cutting of boards/prisms/planks, ensuring maximum output in short time: ✅Double arbor multirip circular saw 40-250 - can cut boards with min. height 40mm and max. height of 250mm ✅ Increased cutting efficiency ✅ Heavy-duty construction for long-lasting durability ✅ Precision- accurate cuts ✅ Advanced automation options to optimize production ✅ Customizable configurations to fit your specific needs Deb Epjv Nv Tgj Dhbekl 🚀 Upgrade your sawmill today and experience the next level of wood processing efficiency! 📩 Contact us now for more details or a free consultation!

Condition: used, Circular saw Debowainqj Ep Dhbskl Manufacturer: Korvet Log diameter from 150-800mm

Year of construction: 2023, Condition: new, Radial Band Saw Dkjb Ejmbbivsp Dhbel

Condition: new, Year of construction: 2023, Basic equipment cutting length 3500 mm Sawing unit in cast iron type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min cutting width between saw blade and Z4 rip fence 1350 mm Z5 cross table (1505x760 mm) with telescope with Z5 miter fence with 2 folding fences Comfort Pack on cross table with extendable workpiece roller Frame table with extendable support and degree grid index system with length compensation motorized height adjustment and inclination of saw blade Djb Epjmdryxj Dhbekl incl. special accessories: motor 9,2 kW start/stop in sliding table Picture shows version Z500X3

Year of construction: 1977, Condition: good (used), Technical data: Engine power: 5,5 Kw Dkob Eshtavhep Dhbjl sliding carriage length: 2600mm suction connection: 120mm Saw blade is not tiltable, no scoring device weight approx. 1,2 t.

Condition: excellent (used), Functionality: fully functional, cutting length (max.): 3,200 mm, cutting height (max.): 70 mm, saw blade diameter: 350 mm, table length: 3,200 mm, total length: 3,300 mm, total width: 2,000 mm, height adjustment type: hydraulic, overall weight: 1,080 kg, type of motor: three-phase motor, Equipment: motor brake, ALTENDORF F 45 format saw with undercutter Machine in perfect technical and visual condition. High class of the manufacturer. Machine after technical inspection. TECHNICAL PARAMETERS: - Length of the carriage 3200mm - Cutting width on the right side 1050mm - Cutting height 70mm - Hydraulic angle adjustment 0-45 - Hydraulic lifting and lowering of the saw - Main engine with a power of 5.5kw - Undercutter engine with a power of 0.75kw - CE certificate Dimensions of the machine: - length 3300 mm - width 2000mm - height 1570 mm Dkob Ep Deway H Dohbjl - weight 1080kg It is possible to test the machine on site Possibility of financing the machine through leasing or installments. MACHINE TRANSPORT JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, total width: 1,500 mm, total length: 11,300 mm, total height: 1,800 mm, cutting width (max.): 350 mm, saw blade diameter: 550 mm, roll width: 430 mm, spindle diameter: 35 mm, cutting length (max.): 5,300 mm, hole diameter of the disc: 35 mm, CEMIL TR550 semi-automatic cross-cut saw Specification: • condition - used, ready to work • manufacturer - CEMIL • model - TR550 • max working width - 350 mm • max working height - 130 mm • maximum cutting length - 530 cm • blade diameter 550 mm • blade mounting spindle - 35 mm • blade speed - 3080 rpm • right, receiving table 505 cm long • left table 600 cm long • tables and feed 43 cm wide • adjustable cutting speed • adjustable pusher speed • possibility of working in automatic and manual cycle • in the machine, possibility of setting, among others length and number of cut elements, board length, waste length • extraction nozzle - fi 140 mm Dkob Epswa Dhls Dhbjl • weight approx. 280 kg • instructions in Italian, control partially translated into Polish • overall dimensions after unfolding - 11,300 cm x 150 x 180 cm (length x width x height) • body dimensions - 110 x 150 x 180 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 1384, cutting length (max.): 5,200 mm, Longitudinal saw: max. length 5.20 m. Machine used in sliced veneer production. Half logs were split in half. Max. height: 250 mm, electric width adjustment. Deb Epsv Tn Spj Dhbjkl

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: C350, cutting gripper Dkjbov Icp Ss Ep Dhbel

Condition: new, Year of construction: 2023, Basic equipment Sliding table anodized 1450 mm x 320 mm cutting length 2000 mm Saw blade diameter 315 mm, without scoring blade Cutting width between saw blade and rip fence 700 mm cutting height max 90° : 107 mm Dkebemft Ius Ep Dhbel cutting height max 45° : 65 mm Cross table with miter fence

Condition: excellent (used), Year of construction: 2001, Sliding Table Saw Manufacturer: SCM Type: SI 450 E Year of Manufacture: 2001 Carriage Length: 3,200 mm Cutting Width: 1,340 mm Cutting Height: approx. 150 mm Cutting Height at 45°: 106 mm Motor Power: 7.5 kW Max. Saw Blade Diameter: 450 mm Speeds: 2,350 - 5,200 rpm Dkeb Ep Dhev S Uvlobjl Speed Adjustment: Variable - Continuous Height Adjustment: Electric Angle Adjustment: Electric Scoring Device: No Motor Brake: Yes

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 105 mm, cutting length (max.): 3,520 mm, cutting width (max.): 160 mm, type of input current: three-phase, extraction nozzle diameter: 100 mm, OMS FC350R double saw for wood, aluminum 2 x 4.0 kW Specification: • condition - used, ready to work • manufacturer - OMS • model - FC 350 R • main engines - 2 x 4.0 kW • encoder for reading the blade position indicating the cutting length • hydraulic-pneumatic control • max. cutting length - 352cm • min. cutting length - 36 or 21 cm • max cutting cross-section - 105x160 mm (at a right angle) • max disc diameter - 350 mm • extraction nozzles fi 100 mm • cutting at an angle in the range of -45 to +45 degrees (right, left) • clamps cut elements vertically and horizontally • weight - approx. 800 kg • control panel • meets CE standards • 1996 year of production • dimensions - 415 x 130 x 150 cm (length x width x height) Additional information: Deb Ep Dewa Ddmjhbjkl • very good, factory technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: as good as new (ex-display), Year of construction: 2023, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,110 mm, cutting depth: 80 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Djb Ep Dhjtwpgmjbjkl Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)