Condition: excellent (used), Altendorf F90 Table length 275 cm cutt.- 120 cm undercutter Motor 5.5 kW 0.75 kW Dkeb Hbwev A T Aroa Rol

Condition: good (used), Complete feed of gang saw Esterer HDN 600 was recently removed due to conversion to frequency-controlled feed. Dkjb Hbwaer Hmhno Rol immediately available Location: Austria, near Wels

Year of construction: 1994, Condition: excellent (used), THECHNICAL DATA : LENGTH OF THE WORKING ARM : 1600 MM MAX. CUTTING THICKNESS with blade 130 mm : 45 mm MAX. CUTTING THICKNESS with blade 160 mm : 70 mm MOTOR POWER : 0,75 W - VOLT 380 / 50 HZ NEON LAMP VOLT 220 BLOWING DEVICE TO CLEAN THE WORKING AREA ELECTRONIC 220 VOLT WORKING TABLE : 1000 X 2000 MM DIMENSIONS : 2400 X 1000 X 1700 MM WEIGHT : 230 KG Dsb Hbwsr Hmtkea Rokl

Condition: excellent (used), Year of construction: 1997, For sale is an Altendorf sliding table saw in very good condition. The saw can be inspected and tested on site. About the machine: - Sliding table 2800mm - Parallel stop 1050mm - Boom up to 3250mm - Height and tilt adjustment via foot pedal Dkeb Hbwaev Syb Hj Rol - Electronic tilt display - Year of manufacture 1997 - Max. 450mm saw blade - Scoring unit: no - Motor power 5.5kW Accessories: Miter gauge, 2nd saw guard, supports, tools, spare parts. You will receive a VAT invoice.

Condition: excellent (used), Year of construction: 1992, Table saw 619 With roller table Year of manufacture 1992 100 mm diameter 45° unit 250 saw blade, 4100 rpm Table width 850 mm, 400 volts Djbjv D Hl Nj Hbwa Rskl Spiral feed carriage with miter stop

Condition: good (used), Year of construction: 1981, Functionality: fully functional, - pneumatic clamping beam - cutting length 3000 mm Dob Hev A U Ivjbwa Rokl - front support table - rear unloading table with stop - motor 2.2 kW

Year of construction: 1973, Condition: not inspected (used), - cutting height 150 mm - cutting width 800 mm Dkobom Uat Ij Hbwa Rsl - hydraulically lifted rollers - 45kW motor The machine has not been tested, no electric cabinet

Year of construction: 2006, Condition: excellent (used), WEINIG high performance cleaving splitting saw Unimat 23 EL SP for planing and the production of lamellas Spindles 4x 50mm. 230mm x 120mm Bottom 7.5kW 6000 rpm Right + Left 11kW 6000 rpm Top 11 kW 6000 rpm Saw spindles 2x 50mm Right saw spindle 37 kW (4000 to 8000 rpm) Left saw spindle 37 kW (4000 to 8000 rpm) Powered outfeed side rollers after saws. Feed motor 7.5 KW Double recoil safety device CE mark Dkebsv T Rhmo Hbwa Rol Total power 112 KW Full heavy duty sound enclosure. Possible to supply with an automatic feeding system, infeed and outfeed if needed.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Bandsaw Centauro R-800 + RVP200 Year of Manufacture: 2017 Dob Hsv T Tc Tjbwa Rskl Technical detalis: - Speed: 680 rpm - Dimensions: 1550 x 1900 x 2370 mm - Wheel Diameter: 800 mm - Maximum Cutting Height: 400 mm - Maximum Cutting Width: 780 mm - Maximum Blade Width: 80 x 0.8 mm - Blade Length Range: 5380 – 5530 mm - Wheel Speed: 680 rpm - Table Height from Floor: 950 mm - Table Dimensions: 1060 x 800 mm - Table Tilt: up to 15 degrees - Power: 11 kW + 0.55 kW - Weight: 700 kg RVP200 FEEDER

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 11100 € 227.55 € Schwenkrahmen 3660x27x0,9 mm 20-100 m/min 320 mm Dksb Hbwevvniaea Rol 300 mm 320x300 mm 640 mm 0.37 kW 2.2 kW 0.12 kW 1900 mm 850 mm 1300 mm 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH

Condition: excellent (used), saw blade diameter: 500 mm, table length: 3,800 mm, Circular saw / squaring machine "CASOLIN" mod. ASTRA 500 5 CNC USED MACHINE IN EXCELLENT CONDITION - V380/50 - "CE" Length of the aluminum carriage: 3800mm MAX diameter of the main blade: 500 mm Engraver with independent motor 5 AXIS CNC Dksb Hbwasv U U Utj Rol Pendant control Digital viewer on the extendable guide

Condition: new, Functionality: fully functional, Notch cutting machine. The Morso-NFXL is a foot operated notch cutting machine for cutting window bars, mullions and cabinet front frames requiring haunch joints. The NFXL leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is step adjustable . The fences, left and right, with the adjustable stops ensure correct work. The special lever system of the machines ensures a very easy operation. Twin return springs automatically bring the knives back to starting position. Maximum width of the wood 200 mm To compare MORSO-NFX with a routing machine the following points must be considered:- Dksb Hev Snuzsbwa Rel 1. A cleaner and more constantly accurate cut will be produced with the Morso-NFX, therefore no further preperation for the joining. 2. The Morso-NFX produces NO DUST, and therefore requires no extraction. 3. The Morso-NFXL requires less than 15 minutes to change the cutting blades, to the set-up, and to the positioning of the stops. 4. As the blades wear, the 45deg. angle remains unchanged, ensuring consistently accurate joints. The Morso-NFXL cuts plastic, all kinds of wood including MDF. Morso-NFXL is delivered with safety guard, waste chute, 6 sliding longitudinal stops, fences 1000 mm on both the right and left side of the machine, 2 nose knifes (chip breaker) 18 et 26 mm, 2 pairs side knives.

Year of construction: 2008, Condition: excellent (used), 11 kW motor log diameter 400 mm Min. log diameter 100 mm log length 3.6 m Min. log length 1.2 m cutting width 300 mm Dksbjm Tx Uxe Hbwa Rjl min. cutting width 1 cm Log press type Wide press rollers Laser pointer Blade length 4670 mm Wheel diameter 600 mm Feed on the inverter

Condition: new, Year of construction: 2025, - Saw unit 2.2 kW (3 HP) - Milling unit 1,1 kW - Sawing length 3700 mm - Double high-grade LM-linear guides - Mechanic axial saw blade adjustment 0 – 2 mm infinitely variable Debj Azdis Hbwa Rskl - Power supply in cable duct with plastic link track - Cutting height 45 mm - Safety equipment

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, cutting length (max.): 2,800 mm, cutting width at rip fence: 1,250 mm, table length: 2,800 mm, height adjustment type: electric, Equipment: scorer, Sliding table saw, circular saw, joiner's circular saw, sliding table saw, panel saw Dob Hov T S Uhebwa Rekl ALTENDORF Type: F45 ELMO POSIT Year of manufacture: 1993 Sliding table 280 cm Electric saw blade height adjustment Electric saw blade tilting with digital tilt angle display Programmable parallel stop Scoring unit Main motor power: 5.5 kW Scoring unit motor power: 1.1 kW Prior inspection is expressly requested. Simply leave your phone number via email, and I will get back to you to arrange a viewing appointment. Subject to prior sale. All information is provided without guarantee. The machines can be picked up by the buyer or shipped via a freight company at the buyer's expense. We can arrange loading and packaging. Shipping costs are approximate; they may vary depending on distance and unloading options; please inquire.

Condition: good (used), Double miter saw for cutting and drilling frames or mullions Electronic opening Dkob Hbwjh Rruasa Rjl

Condition: new, neu 060028 prompt, Zwischenverkauf v Türkei 9210 € 190.65 € 1 Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm Dsbsvvng Ss Hbwa Rekl 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: used, 900mm steering wheels 18.5kw motor Dkjbev Aub Aj Hbwa Rel Voltage 380V

Year of construction: 1998, Condition: excellent (used), - max cutting height 150mm - max material width 170mm - kerf width 1.2mm - 1000mm long feeding table - 1000mm long receiving table - 7.5 kW engine - feed speed 0-2.1 m / min - operating pressure min 6 bar - additional frame with saws and wedges Dsb Hbsil H Scewa Rskl - diameter of the extraction port 100, 150mm

Condition: used, Functionality: unexamined, saw blade diameter: 500 mm, cutting height (max.): 160 mm, cutting width (max.): 430 mm, rotational speed (max.): 2,800 rpm, Two-hand control Roller table Dksb Hbev Tcmuswa Rsl Automatic safety and hold-down device

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Dksbjh D Rt Ae Hbwa Rsl

Condition: good (used), Beam saw for cutting material into finished cut bar with electronic displacement guide Debsp Ecc Uo Hbwa Rskl

Condition: ready for operation (used), Functionality: fully functional, - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 170 mm motors 2 x 90 kW feed motor 3 kW height adjustment motor 1,1 kW blade diameter max. 350 mm spindle diameter 2 x 80 mm sleeve diameter 2 x 100 mm width of track 350 mm total power 188 kW electric feed regulation automatic central lubrication minimum workpiece length 800 mm electrical height adjustment shaft height adjustment six top pressure rollers pneumatic clamps five anti-ejection pawls spigot diameter 2 x 200 mm rotation of spindles 4500 RPM machine dimensions (length / width / height) 280 / 250 / 210 cm Deb Hbotx T Nbjwa Rjkl weight ~ 7000 kg

Year of construction: 2022, Condition: new, Multisaw machine for precision cut of small elements that is used for honey bee frame productions -Power 11kw -Spindle diameter fi 70mm -Saw number 10 -Saw diameter 210mm -Minimum length of work peace 100mm -Max height 40mm -Feeding speed 4-8m/min -Quick-change saw holder Dksb Hbjh Hxycswa Rel

Condition: excellent (used), Year of construction: 2007, I sell the format sliding table saw with scoring Manufacutrer: OTTO MARTIN Model: T60 Classic Year 2007 Cutting length 3200mm. Cutting width 1250mm (optional) Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-46° digital Saw blade and scoring height adjustment digital Dkeb Hbstmwn Howa Rol Digital display for parallel fence and working height. Turn on the main saw blade and scoring unit from control panel Main motor format sliding table saw 5,5KW (7,5 HP) (4000/4800/6000 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately. Including full documentation and CE Certificate.