Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A Fgjbvdnjwf Rgxjtfjb --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: like new (used), Table length 3000 mm Table width 1500 mm Table height 200 mm Bore hole 28 mm Material thickness approx. 24.5 - 27 mm Side panel height 200 mm Weight approx. 1,400 kg Slight signs of wear on the surface Welding table: – 4 feet – standard configuration 650 mm – Through-hardened tool steel X8.7 + plasma nitriding – Material thickness approx. 24.5 - 27 mm – Side panel made of high-quality steel S355J2+N + plasma nitriding – 28 mm diameter bore – Diagonal grid holes on the surface – Rounded corners, edges, and holes – Side panel height 200 mm – Diagonal grid holes on the side panel – Including scale on the surface – Reinforced construction with ribs – Grid lines enable precise assembly Fobvjwgk Sdodntfogb

Condition: not inspected (used), Manufacturer: SERRA Fgjbvdogu U Unontfob

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Febvdnjd Raw Aotfegb Including basic equipment. Accessories shown are optional. Price plus packaging and transport.

Condition: used, Functionality: fully functional, machine/vehicle number: M26043, total height: 3,000 mm, total length: 2,000 mm, Equipment: adjustable boom, Lincoln Electric column & boom, manual height adjustment with articulated boom. Comes with articulating MIG torch and leads ready to plug straight into a MIG set. Excellent setup. We have only used once with a Kemmpi set to fill and cap a 200thk Gr22 forging with excellent results Fgobswg Tm Dovdntfeb

Condition: good (used), Tehac welding manipulator table Diameter bed: 480 mm Fjboldg S Ijvdntfsgb Height max: 113 cm

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 Febvewf Rgrjdntfogb --> Cooling type: F --> Protection class: IP 23

Condition: ready for operation (used), Year of construction: 2007, MicroStep EasyCut plasma & oxyfuel - machining area: 3000 x 1500 mm + shaft 500 mm - 1x master burner carriage for straight plasma cutting Fgebvdnoq Dkhtstfjb - 1x slave burner carriage for oxyfuel cutting - power source: Hypertherm plasma source HD3070 - cutting table: electro-pneumatic Price exworks Wouters Cutting & Welding

Condition: not inspected (used), for sale in pictured condition Fgjbvdntsh Ti R Nofsb

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head Fgobvswd Tg Sodntfsb -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm Weight: 459 kg

Condition: excellent (used), Year of construction: 2008, Microstep plasma cutting machine cutting format 2000x6000MM power source Hypertherm 260 AMP year 2008 with nesting program on computer at the machine, incl. extraction and filter, many new wear parts Fjbvet Uz Upedntfogb

Condition: ready for operation (used), Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Peddinghaus-Absaugsystem-Installationsschneidemaschine Baujahr: 2009 Operates with 400 V In funktionsfähigem Zustand aus der Maschineninstallation entfernt Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Fgsbvdntovilz Tofob Peddinghaus extraction system installation cutting machine Year of construction: 2009 Works on 400v Working removed from machine installation Dimensions part 1: 245x180x340cm LxWxH Dimensions part 2: 160x95x285cm LxWxH Transport possible at additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. The seller is not liable for typing or data transfer errors. The machine is in terms of appearance, technology and wear and tear in accordance with its age; used machines are sold without warranty. The displayed price is exclusive of VAT

Condition: ready for operation (used), Year of construction: 2023, Main Drive Max reach 3500 m Additional Equipment Touchscreen teach pendant with LED backlight (8.4") Torch cleaning units Wire feeding systems Two-station positioner with turning and swiveling movement This CLOOS QIROX CS-50 was manufactured in 2023. A state-of-the-art welding robot featuring a Qineo NexT 452 with 450A power and water cooling module. It includes a two-station positioner capable of handling loads up to 5 kN, ensuring robust performance and flexibility. Ideal for complex welding tasks, the robot supports fiber optic connection cables and has a comprehensive safety system with light curtains and safety fences. For more information about this welding robot, please reach out to us. Application Types Robotics Fobvewhgq Sedntfsgb

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, input current: 32 A, welding current (max.): 400 A, High-end welding machine with 5 meter hoose with jobmaster handle. Fgebewhwaksvdntfjb

Year of construction: 2002, Condition: excellent (used), Severn Science Argon Vacuum Welding chamber, new in 2002, previously used in F1 motor racing facility. Fsbjrwnrgevdntfogb With Edwards E2M 80 vacuum pump. Excellent condition, very rarely used.

Condition: new, Year of construction: 2024, YAWEI Hand Laser Welding Machine YLMW - exclusively at H+S Maschinentechnik GmbH Laser sources: 2000 W - Mild steel: up to 5 mm - VA: up to 5 mm - Aluminum: 4 mm - Brass: 2 mm 3000 W - mild steel: up to 8 mm - VA: up to 8 mm - Aluminum: 7 mm Scope of delivery: - Laser welder with cooling system Fgjbvorg Et Ujdntfsb - Hose set + cable set - Welding gun with adjustable focal length and accessory set - Fiber laser source 3000W from MAX Photonics (2000W optional) - Automatic wire feed Technical data - Laser power 3000 W - Laser wavelength 1064 nm - Power supply 220V We have been the exclusive dealer and service partner for YAWEI machines in the EU for more than 15 years. In addition to press brakes, we also offer laser machines, tube lasers, laser welding machines etc. from YAWEI.

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit. Fgebvdneivg Hgotfob

Condition: used, Year of construction: 2016, Functionality: fully functional, track width: 4,000 mm, working range: 3,000 mm, working width: 3,000 mm, total width: 4,960 mm, total length: 8,400 mm, table length: 6,600 mm, working length: 6,000 mm, table width: 3,200 mm, material thickness: 80 mm, year of last overhaul: 2024, sheet thickness steel (max.): 80 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,000 mm, worktable width: 3,000 mm, height adjustment type: electric, exhaust gas cleaning: Kemper PlasmaFil Compact, Equipment: documentation/manual, Hello, I am selling a Sato plasma cutting system with a Kjellberg Smart Focus cutting source including a Kemper filter. The system is fully functional and can be tested on-site. Dismantling should be carried out by the buyer. Cranes in the hall are available for use. Sato plasma system including 3x6m cutting table Plasma system is equipped with a laser pointer for sheet metal setup (sheet metal position determination and sheet metal position compensation) 8m heavy-duty machine track with HEB300 and milled S49 rails High-precision linear guide with servo motor and integrated CAN bus controller as a controlled Z-axis Stroke 215mm Speed 70mm/sec Feed speed 12,000mm-20,000mm/min Kjellberg Smart Focus 300 plasma power source with PerCut4000 quick-change head Many spare parts/wear parts are still available and can be sold optionally. Automatic gas control with Kjellberg PGV-300 Macro programming on the plasma 96 macros 8m chain chute for energy chain The filter system was replaced with a Kemper system in 2019. KEMPER PlasmaFil Compact - Weatherproof version - Frequency converter Type 31 0650 Febvdewh Rtkentfsgb Extraction capacity 4,500-6,500 m³/h Negative pressure 1,900-2,500 Pa Filter area 100 m² Motor power 7.5 kW Voltage 3 x 400 V 50 Hz Dimensions 1830 x 1830 x 3800 mm

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine Fgjbvdsl Dw U Dsntfjb particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: used, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture 1997 Serial no. Welding source 9885186 Fabric no. Cooling unit 97861? Power 200 Amp. = 20% ED 90 Amp. = 100% ED Mains connection 230 Volt, 50 Hz, Schuko plug - Cable remote control type BP 1436 with 7.5 meter connection cable - Power setting from 1 to 200 amps - direct current only = DC - HF ignition - Cooling water unit for burner cooling - 44895 operating hours read off Fjbet Awm Dovdntfjgb - Operating and maintenance instructions Space required for welding machine L x W x H 550 x 360 x 500 mm Space required for cooling unit L x W x H 550 x 360 x 550 mm Weight of welding machine 45 kg Weight of cooling unit 25 kg Good condition without accessories Price is for a set consisting of 1x power source and 1x water cooling unit.

Condition: excellent (used), Year of construction: 2022, On behalf of a customer we offer a plasma cutting machine from Boschert - Ergocut 4020. It works perfectly and can be tested under power at any time. Technical data: Processing table: 4000x2000mm LxW: 5000x3000mm Fgobvsu Rbqkodntfjb Labold CNC control with 19" touchscreen CAD system (dxf/dwg/iges/cadl) incl. CNC CAD software Drilling and tapping unit ER25 chuck 200mm clearance between table and torch Moving suction unit (suction unit optional) Plasma source: Hi Focus 161i from Kjellberg 2 PerCut 211 plasma torch inserts Automatic gas mixing system Automatic height adjustment

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Fgebvjib Dadjdntfsb Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m Fsbvdewgknxsntfsgb width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Condition: used, Year of construction: 2006, filter area: 84 m², suction capacity: 4,000 m³/h, Dust extraction, welding fume extraction, self-cleaning filter, cartridge for plasma, laser, sandblasting, shot blasting. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: SULT Model: FLC 2-4 HP Year of production 2006 Engine power 4 Kw Efficiency: 2000 - 4000 m3/h Cartridge filter inserts - 4 pcs. Filtration surface 84 m2 Fgjbvdnswgircjtfsb total height - 2.95m width - 1.20m depth - 1.15m stock no.: 0987

Condition: good (used), Year of construction: 1993, filter area: 212 m², suction capacity: 8,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF12cyclopeel - with pre-separator. Cartridge filter cartridges cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Cartridge filter cartridges. Fjbvdstrxzrentfegb Fan of 11 Kw Efficiency 8000 m3/h Filtration surface 212 m2 Filter cartridges 12 pcs. Inlet diameter - 400 mm Control cabinet Dimensions: width - 2.20m x 2.10m height - 4.10m