Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Worktable: 1000 x 720 mm Worktable height: 980 mm Worktable tilt: 0-20° Motor: 3.0 kW Max. cutting height: 450 mm Max. cutting width: 720 mm Saw wheel diameter: 740 mm Saw blade speed: 1540 m/min Chodpsmxp I Asfx Aaqjd Saw blade length: 5340-5420 mm Precision guides above and below Extraction port diameter: 2 x 120 mm L x W x H: 1180 x 820 x 2430 mm Weight approx. 5610 kg Availability: short-term Storage location: Flörsheim

Condition: excellent (used), Planer blade sharpening machine 650 mm sharpening width Chsdjvf Hikopfx Aaqod

Condition: used, Year of construction: 1995, 1500mm trolley Cutting guide 1280mm Stop length 2690mm Cutting height 80mm 45° tilting blade Codpfx Aext Iqhjaqehd Engine braking No incisor!!! 380V

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Chjdpfexugplox Aaqjd Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2006, This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine. Csdpfxoxuw Dao Aaqohd Application Types Edge Banding

Year of construction: 2001, condition: good (used), table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW Chjdpfx Aott Tb Doaqsd weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Saw blade swivel range: 0° - 45° with parallelogram guard with 80 mm extraction port Cutting length: 2800 mm Cutting width: 1250 mm with table extension 800 mm Chedpfx Aajxuxg Noqjd Motor: 5.5 kW with brake motor Maximum saw blade diameter: 350 mm Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm with scoring unit Weight approx. 850 kg Availability: End of January 2026 Location: Frankfurt

Condition: used, Accessory for table milling machine AIGNER Integral fence - used - left section 500 mm long, right section 650 mm long Chedpexuafgjfx Aaqod

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Costa trimming saw, type Leopard, 2 x 55 kW Chsdsxupphopfx Aaqed Cutting height: 200 mm Max. clamping width: 350 mm Feed speed: 4 - 24 m/min Weight approx. 4500 kg

Condition: used, Year of construction: 1999, Under-table crosscut saw Quick Stop 160S - Year of manufacture: 1999 - Pneumatic-hydraulic, NC and CNC controlled - With waste optimization - Dimensions: depth 800 mm, width 3000 mm; usable length 1800 mm - 7.5 kW motor - Control cabinet: 400 x 1200 x 600 mm - Weight: 90 kg Chedpfx Ajxuk Npoaqod - Connected load: 12 kW, 25A - Operating pressure: 6 bar, extraction with 2 ports 120 mm Ø Machine will remain in operation until week 48.

Year of construction: 2001, condition: ready for operation (used), This WOLF KGW 160 was manufactured in 2001. It is an extraction system designed to handle large air volumes, with a supply air capacity of 10,000 m3/h and exhaust air at 9,500 m3/h. Powered by an 11 kW motor, it efficiently manages air flow and pressure. Consider the opportunity to buy this WOLF KGW 160 extraction system. Contact us for more information about this machine. Cedoxuwzxepfx Aaqshd Application Types Other Woodworking Machinery

Condition: ready for operation (used), functionality: fully functional, saw drive: 13,200 W, Well-maintained complete width-adjustable sash saw system LINCK type BV. Right-hand machine. Frame width 760 mm, stroke 600 mm, max. passage height 710 mm. Complete with log infeed, sash carriage with auxiliary carriage. Split wedge with roller conveyor, cross transfer, and model return. Sash saw with new saw tensioners. Reducing gear and frame including 132 kW motor with belt drive 310 rpm. Various spare parts can be purchased as a package. Dismantling at buyer's own responsibility. Full truck loading after dismantling can be offered. Cedext Uvqjpfx Aaqshd

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Info: Was a demonstration unit from Holz-Her and only went into production operation in 2019 Equipment and technical data: Automatic Panel Storage System STORE-MASTER 5110: - 30% to 50% space saving - Minimal distances between stacks (from 70 mm) = optimal space utilization - No panel damage; panel separation monitored by weight measurement - Fully automatic process (infeed/outfeed) as well as automatic loading of the machine - Adaptable to all panel formats (1.2 to 5.6 m), depending on option - Panel rotation by 90° - Low height of manipulator construction External dimensions: - Length: 8.5 m - Width: 7.5 m Panel formats: - Min. panel size: 1.2 x 0.6 m - Max. panel size: 3.2 x 2.1 m - Max. lifting weight: 150 kg Lifting and stacking range: - Stack height: 1.8 m (max. 2.0 m) - Max. lifting height: 2.1 m Travel speed: - Horizontal: approx. 120 m/min - Vertical: approx. 45 m/min Manipulator suitable for slightly air-permeable, smooth materials such as coated chipboard, blockboard, raw MDF, raw HDF, raw chipboard (good quality) Vacuum capacity for the suction units on the manipulator: 100 m³/h for a material mix in the warehouse including e.g. MDF and raw chipboard Connected load: 6 kW Chjdpfx Aswkbagsaqsd Portal bridge with vibration damping, manipulator head with lifting device, as well as steel gripper arm, space-saving due to low structural design Articulated arm design with direct drive via steel band; thus maintenance-free and insensitive to vibration Electronic panel position measurement Panel rotation correction Panels are measured using sensors and neatly stacked Separation device for thin panels via integrated weight measurement Infeed and outfeed station Direct loading onto the machine Warehouse management software Previous list price: €110,000.00 Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2012, operating hours: 1,259 h, functionality: fully functional, power: 36.41 kW (49.50 HP), overall weight: 2,000 kg, Schliesing 355 TX / Wood Chipper / Shredder / Mulcher / 21 cm Ø • Manufacturer: Schliesing • Model: 355 TX • Year of manufacture: 2012 • Operating hours: 1,259 h • Power: 36.41 kW / 49.5 HP • Wood chipper • Shredder • Mulcher • Brushwood processor • Kubota 4-cylinder engine • Feed hopper: W: 1.34 meters x H: 1.06 meters • Infeed capacity: 21 cm Ø • Cutter disc: Ø 80 cm • Cutter disc: Nominal speed 1,140 rpm • Fuel tank: Approx. 50 liters • Technical inspection (TÜV): 08/2026 • Total weight: 2,000 kg Chodpfx Aoxukccjaqed • German machine • Immediately ready for use • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale based on our general terms and conditions.

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Cedjwv Dfcepfx Aaqehd Operating Units: 7 nr

Condition: excellent (used), Year of construction: 2001, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1000 mm Motor output 5,5 kW Cutting height 150 mm Csdpfx Aexuv Nhjaqjhd Saw blade diameter 450 mm Speed 3000/4000/5000/6000 U/min. weight of the machine ca. 1150 kg

Condition: ready for operation (used), Year of construction: 2022, This WoodVER UPK-1 was manufactured in 2022. It features a maximum log diameter of 1000 mm and lengths from 2.0 to 6.5 m. The saw has a 550 mm diameter and operates at speeds up to 3000 rpm, powered by dual 18.5 kW motors. It includes an automatic feed, CNC remote control, and hydraulic log handling, enhancing productivity and precision. Contact us for more information about this machine. Chsdpjxuw A Aofx Aaqjd Application Types Sawing (Wood)

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Very well-maintained compact drying chamber MÜHLBÖCK type QLSF-2x1.2-3x1.2-13 / year of manufacture 2004. Complete system including control unit. Heat requirement: 330 kW. The unit is still in operation! Full transport by truck is possible. Only the counterweight needs to be dismantled. The matching heating system can also be supplied upon request. Dismantling/transport by the buyer is possible. Construction dimensions can be found in the attached drawing. Chodpfxoxt Hwas Aaqod

Condition: new, The comfortable Varioflex rack trolley is designed for the flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for easy transportation of the workpieces. Its robust tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and outer support tubes per side, the trolley can carry loads up to 400 kg when evenly distributed. The removable inner and outer support tubes can be taken out if required and reinserted at the back. When not in use, the rack trolley can be compactly folded for space-saving storage. Optional accessories: - Plastic-coated support tubes - Additional rack Technical Data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Cjdpfxjw I Ux Ne Aaqshd Height: 1855 mm Support tube length: 650 mm (extendable to 1150 mm) Clear distance between the tubes: 70 mm Capacity: 400 kg The image shows optional accessories (additional rack).

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Optionally available with a new Felder RL 200 extraction system from 2024. Cjdpfjxulb Tex Aaqshd This PUTSCH SVP 950M panel saw was manufactured in 2011. It features a maximum cut length of 5300 mm, vertical cut up to 5200 mm, and a cut height of 2200 mm. The saw operates with a motor power of 7.5 hp and a blade diameter of 300 mm, rotating at 5000 rpm. Consider the opportunity to buy this PUTSCH SVP 950M panel saw. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: used, Year of construction: 1997, Used machine Features and technical data: Cjdjxdpluopfx Aaqohd Fan type L with electric motor 1450 rpm 7.5 kW Extraction diameter 300 mm Steel impeller, forward-curved, directly mounted on the motor shaft Housing of welded construction With suction and pressure nozzles Availability: short-term Location: Flörsheim

Year of construction: 2011, condition: ready for operation (used), This profile bending machine was manufactured in 2011. It features an automatic transport system for semi-finished LVT panels, with processing capabilities ranging from 500 mm to 2000 mm in length and 140 mm to 600 mm in width. The system includes longitudinal and cross machines, each equipped with 6 milling motors, ensuring precise profiling. If you are looking to get high-quality profiling capabilities, consider the HOMAG PROFI FPL 525/6/04/PW/V LVT machine we have for sale. Contact us for further details. Csdpfxexuld Is Aaqjhd Application Types Complete Production

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipped with PLC control including touchscreen With jointing milling unit with DIA tool, up to 2 mm milling depth (max. jointing thickness 1 mm for special materials such as multiplex) With extendable workpiece support With quick-heating glue pot with glue change device With cross-cut saw With combination milling unit, radius = 2 mm, with separate pneumatic milling adjustment With corner rounding, radius = 2 mm With flat scraper Max. edge thickness: 2 mm Min. - max. workpiece thickness: 10 - 40 mm Min. workpiece length: 180 mm Feed speed: approx. 7 m/min. Csdpfx Aajxua Rceqshd Ready for operation: approx. 3.5 min. Power consumption: approx. 7.4 kW With undercarriage Machine dimensions: approx. 4200 x 1300 x 1400 mm Weight: approx. 750 kg Extraction nozzle: 1 x 140 mm Availability: approx. end of January 2026 Location: Frankfurt

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. Chsdpfx Aexulapsaqsd Application Types Pressing / Laminating

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Chsdpsxua N Sofx Aaqsd Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim