Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,185 h, Edge thickness: 0.4 - 12 mm Max. workpiece thickness: 8 - 60 mm Feed rate: 8 - 18 m/min, continuously variable Weight: approx. 2.5 t Total length: 6,260 mm Pre-melter: Yes Joining unit: Yes Cross-cut saw unit: Yes Radius, flush trimming unit: Yes Corner rounding unit: Yes Radius scraper: Yes Dsbswhnguo Hb Nk Uscg Surface scraper: Yes Buffing: Yes

Condition: excellent (used), Year of construction: 2011, Radial fan, chip extraction blower, fan, extraction, chip blower, top condition - Steel impeller - Motor power: 11 kW with star-delta starter - Speed: 2930 rpm - Flow rate: 4296 m³/h - Inlet connection: Ø 250 mm - Outlet connection: Ø 250 mm - Motor: 400 volts - Design: GL 360/5 Djbswcttij Hb Nk Uecg - Year of manufacture: 7/2011 - Negative pressure: Pa: 4419 - Motor: A: 22 - Motor: Hz: 50 - Sound pressure level: dB(A): 80 - Weight: 245 kg Location: ex warehouse, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 3,600 kg, shelf length: 3000mm shelf width: 1300mm Djb Hbewfrude Nk Uscg clearance: 400mm 6 hydraulic cylinders Piston diameter 85 mm Machine control from the touch panel Built-in electric oil heating Electric time opening Safety break Year of production 2025 NEW Logic control system Overall dimensions: length: 360 cm width: 160 cm height: 203 cm

Year of construction: 2010, operating hours: 1 h, Condition: excellent (used), Wemhoner line laminate three-dimensional components with thermoplastic foils, veneers and other deformable materials. They enable the production of furniture fronts with glossy surfaces, deeply textured designs and curved fronts. Many of these vacuum press lines incorporate the patented VarioPin® system. Press line composition: - automated foil roll loader; - a table for laying out parts and covering with film; - mebrane press; Dceb Hjv Nzv Tjb Nk Uog - turning and cutting table for parts; - glue cleaning line.

Condition: used, Year of construction: 2010, CNC Intorex TMC 3000 Maschining centre 8 (9) axis -Max. working lenghts 3000mm -Max working square 220x220mm -Max. working diameter 450mm (when wood round) Djb Hb Nounk Rmok Uecg -Stroke axis X 3800mm -Stroke axis Y 460mm (plus 230, minus 230) -Stroke axis Z 510mm -Stroke axis Y2 360mm (turning) -Stroke axis Y3 360mm (milling) -Stroke axis Y4 360mm (sanding) -Stroke axis B (rotary +/- 90°) Power: -Axis A (rotary main motor) 22,2 kw 0-1500 upm -Axis Y2 11kw 1000-4500 upm -Axis Y3 11kw 1000-6000 upm -Axis Y4 2,2 kw 3000 upm max. 24.000 upm -Electrospindle (HSC) 12 kw max. 24.000 upm - Toolchanger 6 positions HSK 63 F - Total installed power 70 kw - Weight approxm. 9,5 tons

Condition: used, Year of construction: 2011, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, cutting height (max.): 80 mm, I will sell a very good, trouble-free panel saw Format 4 Kappa Automatic KA75. This is actually a saw manufactured for Felder by MAYER, i.e. a saw with a very good reputation, strong, heavy construction. The saw has worked without failure for me since 2012 on 1 shift, it was regularly serviced by Felder, it is well-maintained, I believe it is in very good condition and will serve the new buyer for a long time. Year of production 2011, installed 2012 Cutting length 4300 x 4300 mm. Dcsb Hb Nov Ibuyek Ueg Cutting height 80 mm 9 KW engine + 1.1 KW scoring unit Motorized stepless controlled cutting height (grooving) Cutting optimization Formatting 5 Selling due to replacement with a new Mayer. The machine has been serviced and dismantled by Felder and is waiting for a new buyer. Net price

Condition: ready for operation (used), Year of construction: 2001, This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us. Dcjbjwdbd Eo Hb Nk Ujg Application Types Pressing / Laminating

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Dsb Hb Nkov Npf Ae Ujcg Rotor diameter: 250 mm Rotor length: 600 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg - available immediately -

Condition: like new (used), Shelf length: 3500 mm Shelf width: 1300 mm Clearance: 350 mm 8 hydraulic cylinders Piston diameter: 75 mm Machine control via touch panel Electric heating Safety rupture device Upper shelf power: 14,400 W Lower shelf power: 14,400 W Year of manufacture: 2011 Dceb Hjv N Hpljb Nk Ueg Weight: 5100 kg Length: 425 cm Width: 160 cm Height: 210 cm

Condition: excellent (used), Functionality: fully functional, Raimann UNIRIP 310 Multisaw Cutting width 310mm Track width 340mm Max. throughput width / Width at entry:650mm Max. cutting height with Quickfix system - mounting collar: 110mm Min. wood length:500mm Max. feed speed 35m/min Saw diameter min./max.: 300/350mm Djb Hbewfr Iqs Nk Uscg

Condition: refurbished (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: AE00002748, 12kN SEMI-AUTOMATIC CAM PRESS Brand: SCM Model: Action E Serial No.: AE00002748 Year: 2021 MAIN ADVANTAGES: - Better pressing quality, uniform across the entire surface to be machined (comb structure) - Parallelism and orthogonality thanks to the use of screws of the appropriate size. - Efficient operation with knobs FEATURES: - Machine frame: extra-rigid welded monoblock chassis Movable side work surface (X direction) Movable upper work surface (Y direction) Movement of each support is transmitted via a geared motor. This drives two trapezoidal screws of the appropriate size and equipped with a double chain sprocket (5/8"), a system that achieves the best possible parallelism for the movable supports. - Worktop height from floor: 60 cm - Maximum usable dimensions: 2400 x 1100 (H) x 700 mm - Minimum usable dimensions: 250 x 270 (H) x 250 mm - Maximum horizontal pressure: 1000 kg Positioning speed: 50 mm/sec Dsb Hbowf I Iaj Nk Ujcg - Maximum vertical pressure: 1500 kg Positioning speed: 45 mm/sec - Movement achieved by high-precision systems using AC motors. - Power supply: 400 V. Three-phase 50 Hz IN 6 A Installed power: 4 kW - CE marked - Lockable disconnect switch, mushroom stop Dimensions in operating order: x x h. mm Space required around the machine for movement and work: m Transport dimensions (LxWxH): x x h.m Weight: Kg Machine supplied with its manual, spare parts list, and diagrams. Machine serviced, brought into compliance, with quality control and dynamic functional testing. With a 3-month warranty and certificate of compliance. Available from stock, subject to prior sale.

Condition: used, Year of construction: 2013, Functionality: fully functional, I will sell a very good, little used, because it only worked as a second, spare machine, the Format 4 Perfect 710 E-Motion edge bander in full equipment. This is a well-reputed edge bander, strong, heavy construction. I have had the machine since 2013. Bought new. It worked without failure on 1 shift. It was regularly serviced by Felder - it is well-maintained. I believe it is in very good condition and will serve the new buyer for a long time. Dcobjv Ivi So Hb Nk Ujg Feed speed 12m/min. Minimum element length 140mm. Minimum element width 60mm. Feeding of edges from a roll and wooden edgings with a width of 12 to 64 mm. Guillotine shears for edges from a roll with a thickness of 0.4 to 3 mm. Feed ruler 700mm long. Pre-milling. Touch screen. Glue container. Selling due to replacement with a new machine. Net price

Year of construction: 2021, Condition: used, Special price exhibition machine Garbsen TECHNICAL DATAGeneral information Effective delivery quantity approx. 1050l/min Tank capacity 500lMaximum pressure 10bar Air outlet ½Dimensions and weights Length (product) approx. 2000mm Height (product) approx. 1500mmWidth/depth (product) approx. 600mm Weight (net) approx. 279kgElectrical data Supply voltage 400V Mains frequency 50HzPhase(s) 3Ph Power consumption electric motor 7.5kWType of current AC Noise emission Sound pressure level Lp 67dB(A) Explanation sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13Motor(s) Motor type Electric Speed 3000min¯ DESCRIPTIONCoaxial screw compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. The low compressor speed and low bearing load of the patented direct drive enable very high levels of reliability and efficiency. EasyTRONIC Micro II electronic control prevents motor overload, reduces wear, and extends the service life. Monitoring of operating hours, temperature, and overload of the motor. Control of the motor rotation direction via phase sequence relay, thus avoiding possible damage during commissioning or after a relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously dimensioned heat exchangers result in a longer service life and lower fluctuations in oil temperature. User-friendly in every detail. Low-noise, suitable for installation in any working environment. Small external dimensions make transport and installation easy. Service-friendly due to optimal accessibility and simple disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Star-delta circuit as standard. Ready to connect with all fittings. Integrated refrigeration dryer on ESH models. Greater reliability of the Compressed air system without costly downtime and production delays while ensuring product quality. Fully integrated into the housing. Ready to use without installation. Equipped with a control panel and time-controlled condensate drain.¹ Warehouse location: Garbsen Dcsb Hb Nov Hcgnjk Ueg

Condition: good (used), Year of construction: 2006, Industrial extraction system GESCHA, type: EURO-SET professional system, mobile, year of manufacture: 2006 Dcob Hb Nsv Sc H Ssk Uog

Condition: used, WRAVOR WRC 1050 AC – Power, Precision, and Reliability in Wood Processing Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. _____ Key Benefits: High Efficiency: Djb Hb Nkewfq Naj Uecg Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. Precise Cutting: Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 30 m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today.

Condition: excellent (used), Weinig Powermat 700 Compact four-sided planer Working height 10 – 160 mm Working width 20 – 230 mm Number of spindles 6 Spindle arrangement: Dcsb Hjwfry Hob Nk Ujg Bottom 5.5kw Right Left 11kw Top 7.5kw Top 7.5kw Bottom 7.5kw Electronic digital indicators for spindle positions Feed speed regulated by a frequency converter 5-40m/min Feed motor 7.5kw Memory Plus display for saving profile setting values Feed table length 2000mm Year of production 2018 CE certificate + complete technical documentation

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 1069, quill travel distance: 1,300 mm, turning diameter over cross slide: 600 mm, total width: 400 mm, total length: 2,300 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, Wood lathe/turning lathe from 1979 by Jos. Ackermann. Fully functional and in good condition, suitable for series production. Not in use for several years. It is located in the workshop of a medium-sized family business in the Augsburg area. If you are interested or would like more information, please call. Please contact us using the inquiry form here. Utz Carpentry Dcsb Hb Njwhlc Hok Usg

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Dsb Hb Nowhdr Hok Ujcg Including hydraulics

Condition: excellent (used), GRAULE ZS135N pull saw - used - automatic brake Debowcq Rlj Hb Nk Uecg ----- Technical specifications ----- Cutting height: 135 mm, Cutting length: 420 mm, Pivoting angles: 45-90-45°, Tilt angles: 45°, Motor: 3 kW Quality information: - Guides checked/adjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: new, Year of construction: 2025, Functionality: fully functional, Industrial Band Saw – Power, Precision, and Reliability in Every Cut – HEAVY DUTY MACHINES Equipped with a powerful electric motor of 30, 37, 45, or 55 kW, this band saw delivers outstanding performance, allowing for cutting capacity of up to 35 m³ of logs per 8-hour shift. With a maximum log diameter of Ø1150 mm, it easily handles even the most demanding timber. Key Advantages: • High Precision – Perfectly straight cuts with minimal deviations. • Power and Efficiency – High motor output ensures fast and efficient cutting. • Robust Construction – Built to withstand the toughest working conditions. • Easy Operation – Intuitive control system for quick adjustment of all parameters. • Safety Systems – Integrated safety mechanisms for secure operation. Whether you're in the wood industry, a sawmill, or a large-scale workshop, this saw is the ideal solution for high-productivity and precise cutting of large logs. Deb Hb Nswfqqdjk Uocg High degree of automation with Siemens / Scheider PLC and Wravor FastSmartCut program, always with option with manual control.

Condition: excellent (used), Self-loading press for gluing Orma LS/CA/HF 30/13 Working length 3000mm Working width 1300mm Automatic loading 6 side clamps Dcjb Hsvxib Njb Nk Ujg Shelf mounted on 6 pistons CE certificate

Condition: not inspected (used), Year of construction: 2003, Functionality: fully functional, Heavy-duty Stratoplan planer with 6 spindles. Year of manufacture: 2003 Feed rate: 30 m/min to max. 300 m/min. Spindles: U/T/R/L/U/T Working height: 17 mm to max. 120 mm. Working width: 50 mm to max. 300 mm. Supplied with infeed table (accelerator) and cross conveyor. Dcsb Hbowhdnbs Nk Usg 6 sets of tools. Table height: 1,100 mm Working width: 50-300 mm Working height: 17-120 mm Feed rate: 30-300 m/min Control system: Siemens S7 Connected load: 390 kW

Condition: excellent (used), HOLZ-HER SECTOR 1255 pro panel saw - used - Welded frame with extremely high rigidity, pneumatically adjustable sliding grid, stable locking of the saw carriage at the top and bottom, electrically monitored locking for vertical cutting, foldable plunge lever on the saw unit, retractable riving knife for cutouts, control panel at eye level, digital display on the longitudinal stop, digital display for horizontal cutting, lifting roller transport system, TRK extraction system, dust-tested, year of manufacture 2023 ----- Technical specifications ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Trimming height: 2,110 mm, Dcsb Hbsv I Dqwo Nk Uog Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 4 kW, Extraction nozzle diameter: 120/100 mm, Compressed air: 6 bar, Space requirement (LxDxH): 5,500x1,600x3,000 mm, Weight: approx. 950 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: excellent (used), Comec Cross Feed Sander for Furniture Chair Elements Sanding Belt Width 90mm Deb Hjwfq Txeb Nk Ujcg Motor Power 5.5kw

Condition: new, Minimax ME 35 TR S Holzkraft Edge Banding Machine -Exhibition Machine- This offer is an equipment package. The following items and options are already included in the price: Dcobsv Nhhpj Hb Nk Uog - New exhibition machine -