Condition: excellent (used), HW-WPL quarter round cutter set in wooden case 132x20x30 mm, 2-tooth, 5-tooth, unused Dehx Dswc Siio Ng Eocg

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers Dcehx Dotmtf Rs Ng Eeg - Manufacturer: Passimo OY - Screen area: 15 m2 - After renovation.

Condition: like new (used), Hydraulic log splitter, working Details on request Dcshjfin Rgex D Ng Eog

Condition: excellent (used), Functionality: fully functional, Double-sided edge sanding line consisting of two machines with 6 sanding units each. Dcehouyizcsx D Ng Ejg

Condition: used, Year of construction: 2020, Working dimension Z: 300 mm Number of milling spindles: 1 HOLZ-HER 5-axes spindle 7840: Yes Milling spindle liquid-cooled: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Dshx D Nsv R Ekwog Eecg Tool clamping system: HSK-F63 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction HOLZ-HER Drilling aggregate 7882: Yes Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 8 Positioning aid: Yes Laser setup aid: Yes Self-adjusting machine table: Yes Vacuum pump: Yes HOLZ-HER ECO-Vac: Yes Safety device: Safety mat Interface for .dxf data: Yes Pendulum machining: Yes Control: PC control Control cabinet cooling: Yes Software: HOLZ-HER CAMPUS Conformity marking: CE mark Space requirement Length: 8,95 m Space requirement Width: 4,62 m Space requirement Height: 2,86 m

Condition: reconditioned (used), Debarker for logs from 130 to 700 mm in diameter. Dcjhxewfz Iyo D Ng Eog

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,185 h, Edge thickness: 0.4 - 12 mm Max. workpiece thickness: 8 - 60 mm Feed rate: 8 - 18 m/min, continuously variable Weight: approx. 2.5 t Total length: 6,260 mm Pre-melter: Yes Joining unit: Yes Cross-cut saw unit: Yes Radius, flush trimming unit: Yes Corner rounding unit: Yes Radius scraper: Yes Dohxewhngus D Ng Escg Surface scraper: Yes Buffing: Yes

Condition: excellent (used), Year of construction: 2011, Radial fan, chip extraction blower, fan, extraction, chip blower, top condition - Steel impeller - Motor power: 11 kW with star-delta starter - Speed: 2930 rpm - Flow rate: 4296 m³/h - Inlet connection: Ø 250 mm - Outlet connection: Ø 250 mm - Motor: 400 volts Dshjwcttiex D Ng Ejcg - Design: GL 360/5 - Year of manufacture: 7/2011 - Negative pressure: Pa: 4419 - Motor: A: 22 - Motor: Hz: 50 - Sound pressure level: dB(A): 80 - Weight: 245 kg Location: ex warehouse, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 3,600 kg, shelf length: 3000mm shelf width: 1300mm clearance: 400mm 6 hydraulic cylinders Piston diameter 85 mm Machine control from the touch panel Built-in electric oil heating Electric time opening Safety break Year of production 2025 NEW Logic control system Overall dimensions: length: 360 cm Dcehxowfrudj D Ng Ejg width: 160 cm height: 203 cm

Condition: good (used), Functionality: fully functional, circular saw 300 mm thickness/thickness planer Dshjwf Al Hjx D Ng Ejcg spindle moulder

Condition: used, Year of construction: 2014, Cutting height max: 133 mm Saw blade diameter max: 400 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Main motor power: 5,5 kW Rotation speed steps: 3 Scoring aggregate: Yes Dehx Dov R Ek Do Ng Eocg Scoring saw height adjustment: Yes Controlled axes: Yes Number of controlled axes: 2 Conformity marking: CE mark Total connection: 5,5 kW

Condition: new, Year of construction: 2023, Wood chipping machine Dcehxjtnlfye D Ng Esg

Condition: used, Year of construction: 2011, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, cutting height (max.): 80 mm, I will sell a very good, trouble-free panel saw Format 4 Kappa Automatic KA75. This is actually a saw manufactured for Felder by MAYER, i.e. a saw with a very good reputation, strong, heavy construction. The saw has worked without failure for me since 2012 on 1 shift, it was regularly serviced by Felder, it is well-maintained, I believe it is in very good condition and will serve the new buyer for a long time. Dcehx D Nov Ibuyeg Esg Year of production 2011, installed 2012 Cutting length 4300 x 4300 mm. Cutting height 80 mm 9 KW engine + 1.1 KW scoring unit Motorized stepless controlled cutting height (grooving) Cutting optimization Formatting 5 Selling due to replacement with a new Mayer. The machine has been serviced and dismantled by Felder and is waiting for a new buyer. Net price

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Dohx D Ngev Npf Ae Escg Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Rotor diameter: 250 mm Rotor length: 600 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg - available immediately -

Condition: like new (used), Shelf length: 3500 mm Shelf width: 1300 mm Clearance: 350 mm 8 hydraulic cylinders Piston diameter: 75 mm Machine control via touch panel Electric heating Safety rupture device Upper shelf power: 14,400 W Lower shelf power: 14,400 W Dohxjv N Hplj D Ng Eecg Year of manufacture: 2011 Weight: 5100 kg Length: 425 cm Width: 160 cm Height: 210 cm

Condition: used, Year of construction: 2010, CNC Intorex TMC 3000 Maschining centre 8 (9) axis -Max. working lenghts 3000mm -Max working square 220x220mm -Max. working diameter 450mm (when wood round) -Stroke axis X 3800mm -Stroke axis Y 460mm (plus 230, minus 230) -Stroke axis Z 510mm -Stroke axis Y2 360mm (turning) -Stroke axis Y3 360mm (milling) -Stroke axis Y4 360mm (sanding) -Stroke axis B (rotary +/- 90°) Power: -Axis A (rotary main motor) 22,2 kw 0-1500 upm -Axis Y2 11kw 1000-4500 upm -Axis Y3 11kw 1000-6000 upm -Axis Y4 2,2 kw 3000 upm max. 24.000 upm -Electrospindle (HSC) 12 kw max. 24.000 upm - Toolchanger 6 positions HSK 63 F - Total installed power 70 kw Dcohx D Nsunk Rmog Esg - Weight approxm. 9,5 tons

Year of construction: 2021, Condition: used, Special price exhibition machine Garbsen TECHNICAL DATAGeneral information Effective delivery quantity approx. 1050l/min Tank capacity 500lMaximum pressure 10bar Air outlet ½Dimensions and weights Length (product) approx. 2000mm Height (product) approx. 1500mmWidth/depth (product) approx. 600mm Weight (net) approx. 279kgElectrical data Supply voltage 400V Mains frequency 50HzPhase(s) 3Ph Power consumption electric motor 7.5kWType of current AC Noise emission Sound pressure level Lp 67dB(A) Explanation sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13Motor(s) Motor type Electric Speed 3000min¯ DESCRIPTIONCoaxial screw compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. The low compressor speed and low bearing load of the patented direct drive enable very high levels of reliability and efficiency. EasyTRONIC Micro II electronic control prevents motor overload, reduces wear, and extends the service life. Monitoring of operating hours, temperature, and overload of the motor. Control of the motor rotation direction via phase sequence relay, thus avoiding possible damage during commissioning or after a relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously dimensioned heat exchangers result in a longer service life and lower fluctuations in oil temperature. User-friendly in every detail. Low-noise, suitable for installation in any working environment. Small external dimensions make transport and installation easy. Service-friendly due to optimal accessibility and simple disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Star-delta circuit as standard. Ready to connect with all fittings. Integrated refrigeration dryer on ESH models. Greater reliability of the Compressed air system without costly downtime and production delays while ensuring product quality. Fully integrated into the housing. Ready to use without installation. Equipped with a control panel and time-controlled condensate drain.¹ Dcohx Dev Hcgns Ng Eog Warehouse location: Garbsen

Condition: ready for operation (used), Year of construction: 2001, This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us. Application Types Dcjhx D Njwdbd Eeg Esg Pressing / Laminating

Condition: used, Year of construction: 2013, Functionality: fully functional, I will sell a very good, little used, because it only worked as a second, spare machine, the Format 4 Perfect 710 E-Motion edge bander in full equipment. This is a well-reputed edge bander, strong, heavy construction. I have had the machine since 2013. Bought new. It worked without failure on 1 shift. It was regularly serviced by Felder - it is well-maintained. I believe it is in very good condition and will serve the new buyer for a long time. Feed speed 12m/min. Minimum element length 140mm. Minimum element width 60mm. Feeding of edges from a roll and wooden edgings with a width of 12 to 64 mm. Guillotine shears for edges from a roll with a thickness of 0.4 to 3 mm. Dcohx D Ngov Ivi So Eog Feed ruler 700mm long. Pre-milling. Touch screen. Glue container. Selling due to replacement with a new machine. Net price

Condition: refurbished (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: AE00002748, 12kN SEMI-AUTOMATIC CAM PRESS Brand: SCM Model: Action E Serial No.: AE00002748 Year: 2021 MAIN ADVANTAGES: - Better pressing quality, uniform across the entire surface to be machined (comb structure) - Parallelism and orthogonality thanks to the use of screws of the appropriate size. - Efficient operation with knobs FEATURES: Dcjhjwf I Iaox D Ng Ejg - Machine frame: extra-rigid welded monoblock chassis Movable side work surface (X direction) Movable upper work surface (Y direction) Movement of each support is transmitted via a geared motor. This drives two trapezoidal screws of the appropriate size and equipped with a double chain sprocket (5/8"), a system that achieves the best possible parallelism for the movable supports. - Worktop height from floor: 60 cm - Maximum usable dimensions: 2400 x 1100 (H) x 700 mm - Minimum usable dimensions: 250 x 270 (H) x 250 mm - Maximum horizontal pressure: 1000 kg Positioning speed: 50 mm/sec - Maximum vertical pressure: 1500 kg Positioning speed: 45 mm/sec - Movement achieved by high-precision systems using AC motors. - Power supply: 400 V. Three-phase 50 Hz IN 6 A Installed power: 4 kW - CE marked - Lockable disconnect switch, mushroom stop Dimensions in operating order: x x h. mm Space required around the machine for movement and work: m Transport dimensions (LxWxH): x x h.m Weight: Kg Machine supplied with its manual, spare parts list, and diagrams. Machine serviced, brought into compliance, with quality control and dynamic functional testing. With a 3-month warranty and certificate of compliance. Available from stock, subject to prior sale.

Condition: excellent (used), Functionality: fully functional, Raimann UNIRIP 310 Multisaw Cutting width 310mm Track width 340mm Max. throughput width / Width at entry:650mm Max. cutting height with Quickfix system - mounting collar: 110mm Dcehx Dowfr Iqe Ng Ejg Min. wood length:500mm Max. feed speed 35m/min Saw diameter min./max.: 300/350mm

Condition: good (used), Year of construction: 2006, Industrial extraction system GESCHA, type: EURO-SET professional system, mobile, year of manufacture: 2006 Dcehx Dsv Sc H Sj Ng Eog

Condition: excellent (used), Weinig Powermat 700 Compact four-sided planer Working height 10 – 160 mm Working width 20 – 230 mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw Right Left 11kw Top 7.5kw Top 7.5kw Bottom 7.5kw Electronic digital indicators for spindle positions Feed speed regulated by a frequency converter 5-40m/min Feed motor 7.5kw Memory Plus display for saving profile setting values Feed table length 2000mm Year of production 2018 CE certificate + complete technical documentation Dcohxowfry Hs D Ng Eog

Condition: excellent (used), Self-loading press for gluing Orma LS/CA/HF 30/13 Working length 3000mm Working width 1300mm Automatic loading 6 side clamps Dcshxevxib Nj D Ng Eog Shelf mounted on 6 pistons CE certificate

Condition: excellent (used), Comec Cross Feed Sander for Furniture Chair Elements Sanding Belt Width 90mm Dshxjwfq Txs D Ng Eecg Motor Power 5.5kw