Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Dohsvxlq Hox D Ng Ejcg Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), Code: 0099 Brand: HOFMANN - GERMANY Model: TFS 1245 - CE Standard Automatic spindle moulder with spindle tilting +/- 45 degrees with extended table - CE Standard - Year 2008 Sturdy structure with cast iron table Table size mm 2050 x 815 Extractable support extension for large workpieces Spindle diameter mm 50 Spindle tilting +/- 45 degrees Motor power Kw 4,7 - 6,3 Spindle speed 3000/4000/5000/6000/8000/10000 rpm with display Electric spindle lift with display Electric spindle tilting with display Reversing spindle rotation Adjustable spindle moulder fence with displacement visualised by mechanical numerators Hanging control panel Aigner accident-prevention guides Spindle protection Arrangement for feeder 2 Suction ports diameter mm 120 Overall dimensions mm 2050 x 1250 x 1850 h Djhowd Ityex D Ng Ejcg Weight kg 900

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: Dshx D Ngelar Rio Eecg - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: used, Year of construction: 2007, Functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm back loaded + rotation table + air cushion table at cutting line motor 18 kw sawblad Ø520 mm scorringblade Ø200 mm 12 pcs grippers on the pusher Dohowg Avzsx D Ng Ejcg MACHINE AVAILABLE FROM WEEK 46/2025

Condition: used, (Customer order) Automatic splitting machine for the production of parquet and slats With three units, total connected load 70 kW Min. strip length approx. 200 mm Dcshewcn Emex D Ng Esg Max. strip width 40-100 mm Max. thickness 80 mm Feed speed 15-40 mm

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. Djhowhpcqsx D Ng Ejcg We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: good (used), - Used machine Dehx D Ngswhvfxj Eocg - Passage width: 1350 mm - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A - Rated power: 62.7 kW - Voltage: 400 V

Condition: good (used), Code: 0098 Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Djhx D Ngswd Hafj Eecg Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: new, Complete set with accessories for Pallmann floor/parquet sanders. New and in original packaging. Can be inspected, shipping available. - Pallmann Spider - 1x additional weight 15 kg - 1x suction sleeve - Pallmann Cobra - Carriage for the Cobra - Pallmann single-disc machine UNO - Pallmann Gecko Star - Pallmann short attachment for Gecko Star - Pallmann Gecko Flex - Pallmann transport case for Gecko Flex - Wolff pre-separator 50 liters Dohxsv D N I Ts D Ng Eocg Machines can also be purchased individually.

Condition: repair required (used), Year of construction: 2007, Functionality: unexamined, travel distance X-axis: 6,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 170 mm, controller model: Kvara, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is currently partially operational. A number of parts need to be replaced/checked, such as the air lines. PLC is operational, possibly software reset required. 3-axis machine. All parts, mats, bulkheads and protective covers are present. Can be picked up immediately. Possibly also a similar 4-axis machine for sale. This is fully operational and can be picked up mid-October. Djhx Dswg Hw No Ng Ejcg

Condition: ready for operation (used), Year of construction: 1999, A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible. Dohx Dewhfmrs Ng Eocg

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. Dcjhx D Ngowhn T Ij Ejg High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters.

Condition: good (used), Year of construction: 2001, Automatic cutting machine with three stops Dcohxevnwgfj D Ng Ejg

Condition: excellent (used), Year of construction: 1996, Feeder, circular saw feeder for sliding table saws For cutting moldings, window scantlings, trimming ABS edges, etc. Attaches to the circular saw stop Motor 0.14 kW, 380 volts Two feed speeds: 13 + 16 m/min Integrated electric safety magnet system secures the feeder to the saw table with an electromagnet Quick adjustment of the workpiece height via handwheel Dcohx D Ngewcyvwe Esg Rubberized feed rollers slightly sawn, but still usable Max. workpiece height approx. 80 mm Minimum workpiece length approx. 200 mm Extraction connection Original paint, only slightly touched up CE mark With mobile wooden transport box The mounting rail is 41 x 21 mm, internal dimensions 31 x 11 mm, groove width 13 mm Adaptable to many sliding table saw manufacturers, but other adapter rails are also available Panhans Weight approx. 30 kg The machine can be demonstrated on-site by appointment. We only offer machines that are in stock and ready for demonstration; see "Other offers from this supplier."

Condition: new, Complete set of safety mats for a CNC machine, new and in original packaging. Includes all components required for the safe operation of a CNC machine. Very easy to install, can be installed by a trained machine operator. Overall dimensions: 5600 mm long and 1330 mm wide. Weight approx. 350 kg. Supplied with plug-in safety mats in the following sizes: - 3 pieces 1000 x 1200 - 2 pieces 750 x 1200 Dcehx D Ngjv T Na Is Eog - 2 pieces 500 x 1200 - 6 pieces plug-in connection cables - 1 piece transition strip for the machine - 9 pieces aluminum cover profiles - 2 pieces middle zone connecting bars in yellow - 2 pieces outer zone connecting bars in black - 1 piece assembly instructions Unfortunately, we ordered the incorrect safety mats, and since these are manufactured goods, we cannot exchange them. In the last picture, we have assembled the reorder; it is for your convenience only. We are happy to ship the goods; the buyer bears the shipping costs.

Condition: used, Year of construction: 2019, Edgeband thickness max: 8 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece width min: 70 mm Feed min: 8 m/min Feedrate max: 14 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: Premelting unit BRANDT Glue system QA 65N Gluing unit: Yes Quick-change glue pot: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 HOMAG Fine milling unit MS 40 Multistage trimming unit: Yes Corner rounding unit: 1 motor Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: right-side machine Machine length: 5.100 mm Dcjhxsuxqvxe D Ng Eog BRANDT Automatic edge feeding device: Yes Infeed barrier: Yes Control: Homag powerTouch Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: used, Year of construction: 2008, Underfloor painting system with return air ceiling and heating coil. Exhaust air unit, air volume: 6,000/3,150 m³/h. Motor: 2.7/0.7 kW. Supply air unit, air volume: 7,300/3,650 m³/h. Motor: 0.46/2.2 kW. Heater: PWW 80/60°C / 84 kW. Dcehevwauksx D Ng Esg Storage location: Nattheim

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Djhx D Ngjwhr Nme Ejcg

Condition: used, Year of construction: 2023, Special price exhibition machine, Bad Wimpfen. Basic machine. Cutting technology meets the future. The CONTROL has always defined a class all its own – the premium class for vertical panel saws. But this advancement never stops. We have expanded the CONTROL into a premium-class vertical cutting center, with a higher level of sawing process automation and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved operating comfort in every detail. Saw frame • Machine manufactured with precision parts to 1/100 mm • Solid, self-supporting, firmly welded, torsion-resistant saw frame • Full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller blocking during sawing Saw beam • Stable, durable saw beam steel construction • Automatic saw beam locking with interface detection Saw unit • Play-free, smooth-running guides • Robust bearings of the motor carriage ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Saw motor 1-n, 400V, 50Hz • Speed 4800 rpm • Greater comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic immersion and pivoting of the saw motor • Pneumatic clutch for easy conversion to manual operation • SUPERSILENT sound insulation to reduce sawblade noise • Electromagnetic motor brake Control • 12" inch touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Continuously adjustable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour meter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vert. Axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple awards (including the Swiss Design Award) • Functional and user-friendly ergonomics Installation • Wall or freestanding (optional) installation possible Note: Permissible ambient temperature: min. + 5 degrees / max. + 40 degrees Celsius Relative humidity: 19-95% Without mains voltage fluctuations greater than +/-10% of the nominal voltage, a voltage stabilizer must be installed at the installation site. Illustrations may contain special accessories. Type 6224 Cutting area 5300x2240/2100x80mm Pcs Cutting length 5300mm Cutting height vertical cut 2240mm Cutting height horizontal cut 2100mm Cutting depth max. 80mm Cutting depth min. 4mm (automatic feed) Cutting depth min. 2mm (manual feed) For the exact installation dimensions, please refer to the brochures or installation plans. ProLock Easy-Fix tool clamping system Pcs Scoring saw unit VSA Continuously adjustable Pcs Permanently installed scoring saw unit with pneumatic retraction. Push button with indicator light directly on the saw unit and control box. Good, easily accessible adjustment of the scoring unit. Continuously adjustable scoring width. (incl. scoring saw blade) Dcohxswhr Ngo D Ng Ejg

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Djhx D Nswhr Ezjg Escg

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Dohx Dswhr Euo Ng Escg Storage location: Nattheim

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Dshowhr Enjx D Ng Eocg

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Djhxjwhr Ehj D Ng Escg Storage location: Customer

Condition: used, Year of construction: 2023, Only 466 operating hours, including cross-screw discharge and automatic magnetic separator. Drive power: 18.5 kW. Throughput: 350 - 600 kg/h. Hopper: 990 x 990 mm. Screen: 30 mm. Blades: 27. Chopper dimensions: 1050 x 1500 x 1710 mm. Chopper weight: approx. 1700 kg. Dohx Djwhr Amj Ng Escg Storage location: Customer.

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Storage Location: Supplier Djhx D Ngowhrvts Eecg