Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Cohxy Tqeif Az Uj Sjgt Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm Cgohxy Tsvzqc Hsq Sjt -Weight: 144 kg

Condition: used, No. 04400 Roller conveyor trolley / loading station Ruchser RU-RWSF / RU-VL Used Consisting of 2 units: - Roller conveyor trolley Ruchser RU-RWSF 30/7 With wide roller conveyor approx. 500 mm Height from roller conveyor approx. 1600 mm, length approx. 3000 mm Cehxovdwa Rey Tq Ssgt Can be moved on rails (rails not included in scope of delivery) Transport dimensions approx. 3000 x 850 x 1900 mm, weight approx. 200 kg - Loading station Ruchser RU-VL 1600 For loading order picking trolleys Can be moved on rails (rails not included in scope of delivery) The loading device moves under the order picking trolley and pneumatically lifts the window so that it protrudes slightly and can be rolled away Transport dimensions approx. 1650 x 1200 x 400, weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2006, Biesse Rover B 4.35 CNC Machine Description: Working fields: X = 3200 mm; Y = 1315 mm; Z = 150 mm Table type: Beam table (manually) 6 bars with 3 cups 1 milling motor Motor 9 kW Drilling unit: BH-17 Tool holder: ISO-30 Cohjwgctgsxy Tq Segt Changer: 9 positions moving along Number of vacuum pumps: 1 Biesse Works (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Number of spindles 4 St. Working width 260 mm Working height 160 mm Length of the planing table 2000 mm Feed speed 6-12 m/min. total power requirement 28 kw Dimensions (L/W/H) 3.300 x 1.600 x 1.700 mm Dust suction hood 1 x 250 mm Weinig Cube four-side planer ----- Machine is cleaned and checked. Technical data ----- Working width 20 - 260 mm Working height 8 - 160 mm (with tool flight circle 125 mm) Spindles ----- WEINIG Easylock with precision reversible knives in HSS for quick and convenient knife changing. You have never changed a knife so quickly. Customer benefits: - no adjustment necessary - short downtimes - no adjustment errors - easy to use Motor strengths: 1st spindle bottom: 7.5 kW 2nd spindle left + 3rd spindle right common motor 11.0 kW 4th spindle bottom: 7.5 kW Feed system ----- Frequency-controlled feed, infinitely variable 6 - 12 m/min Durofer pointed tooth rollers with depth limiter and self-cleaning Pneumatic pressure for feed rollers, including water separator Cycle-controlled dressing to support manual dressing. The feed roller is released after the second feed roller has gripped the workpiece. After leaving the second feed roller, the feed roller is brought into the starting position for the next workpiece. Machine electrical system ----- Operating voltage 400 volts (voltage range 380 - 420 volts), 50 hertz Electrical design according to DIN VDE 01 13, electrical equipment of industrial machines EN60204, IEC- 204-1. Other electrical regulations are not taken into account. Before operating frequency-controlled devices and systems, the customer must install an all-current-sensitive residual current device in accordance with DIN/ VDW 0100-482 in operating facilities at risk of fire Control of the extraction system via the machine software Machine stands, tables and stops ----- Planting table 2.0 m long (including jointing tine) One sliding roller in the outfeed table Automatic lubricant supply for removing resin from the table, including 5 liters of lubricant. - controlled by incoming and outgoing wood - lubricant quantity dependent on the set planing width - controlled by running meters traveled - improved transport of individual parts - reduction in contamination from resinous wood - extremely easy to use One sliding roller in the outfeed table MPV - MoulderPreView Cgshjwhf Ivexy Tq Sst ----- Optical projection of the finished dimensions onto the raw part before processing. - Dimensional control before planing - Consideration of deflection and curvature when setting - Quick correction of the planing and joining Customer benefits: - Assessment of the workpieces before processing - Higher product quality - Visual inspection Machine operation ----- The clear software was specially developed for the CUBE. Thanks to the intuitive operation, training is not necessary. What can the CUBE software do: - Lightning-fast setting of the workpiece dimensions - Motorized setting of the planing and joining - Clear layout, large symbols - Memo function The last 10 dimensions are saved and can be repeated if necessary. - stepless adjustment of the feed rate - ...

Condition: used, Year of construction: 1994, No. 04470 Electro-hydraulic veneer press Joos HP 90 Used, year of construction 1994 Press area 2550 x 1350 LW Cgehxyswhc Awo Tq Sjt Gold anodized heating plates, electrically heated Total pressing pressure 90 tons Opening width 400 mm 4 press cylinders each 90 mm diameter Specific pressing pressure with full load 2.75 kg/cm2 Specific pressing pressure with 2 m2 load 4.58 kg/cm2 Operating pressure 355 bar Thickness of the heating plates approx. 51 mm Connected load per plate 9.1 kW Operation with rotary switch Push-button control for opening / closing / stop 2 safety ripcords (all-round) Automatic activation (overrun) of the press cylinders when pressure is released The “Goldeloxal-Decor D.B.G.M.” system makes the surface of the valuable heating plates extremely hard. This results in no scoring, reduced consumption of release agents, shorter working time, no film wear and higher quality veneer work. At the heart of the hydraulic quality press is the hydraulic unit, securely installed in the center of the lower part of the press. This design prevents damage to the motor, pump and other units. The motor, valves and two-stage high-pressure pump are maintenance-free at Joos. With the dynamic piston bearing, the pistons are not bolted to the pressure table but instead rest dynamically on a planed support surface under the pressure table. The table is prevented from tilting and moving by a column guide. A precision rack and pinion parallel guide ensures the synchronization of the printing table. Transport dimensions approx. 2950 x 1560 x 2160 mm LWH Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2018, Comeva Compacta E 4T Edgebander with Pre-milling Description: Max / min edge thickness: 0,4-3 mm Pre milling unit Gluing unit Cutting unit End cutting unit with saw Machine sizes: 3900x800x1500 Weight: 1500 Kg Cgshxy Tjwgb I Noq Sot (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 4100 x 2650 x 1050 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Cgohxyowhf Iio Tq Set Largest working area approx. 3450 x 2000 mm External dimensions approx. 4100 x 2600 x 1050 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2009, table length: 2,600 mm, power: 7.5 kW (10.20 HP), table width: 920 mm, No. 04469 Spindle moulder / swivel spindle milling machine Casolin F 45 KL EVO Used, year of construction 2009 Very heavy version with full equipment Control unit EVO EL 2 with programming functions The body of the machine consists of one part Spindle swivels +/- 45.5° on both sides 4-axis control EVO Cshxyewhck Ue Tq Ssgt Spindle diameter 30 mm Effective height of the spindle 140 mm Maximum tool diameter for profile milling 250 mm Maximum tool diameter for tenoning 300 mm Motor power 7.5 kW Direction of rotation right/left Speeds 3000 / 4500 / 6000 / 8000 / 10000 rpm Table with extensions 2600 x 920 mm LW Including 3-roller feed unit Maggi 2 suction connections each 120 mm diameter Transport dimensions approx. 2600 x 1500 x 2000 mm LWH Weight approx. 1350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels Cgehxy Tqjwgb Hxe Set On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm Cjhxy Tqjwamqvo Sogt > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Cjhxy Tqjv Uq Tlo Segt Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the Cgehxy Tqovnv Uus Set opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter Cgjheu Su Hujxy Tq Sjt > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg Cehxy Tjvnh T Noq Segt All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: used, Length 2700 mm Width 1100 mm Cgshxysnl Nqqe Tq Sot Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: used, engine output 5 kW saw-blade dia. 300-350 mm Cgjhxy Totg Aihoq Set Working speed 0-40 m/min weight ca. 1550 kg kg Concept 350 PLUS "Partnership Edition" pressure beam saw Cutting length: 3.200 mm ----- combines the advantages of different sawing systems. Flexible as one Panel saw, precise and safe like a pressure beam saw and ergonomic like a rip saw ----- Manufacturer description: - Saw unit can be swiveled up to 46° - Pressure bar, including LED lighting with 3 different action colors: WHITE: Machines in rest position RED: Pressure bar lowers or emergency stop function BLUE: Sawing unit moves - variably usable support table 1,000 x 500 mm - Scoring system using the main saw blade in synchronization - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, including: Saw blade stand, template holder, emergency stop button, start button, selector switch Groove/score saws/saws, rotary switch feed speed, switch for Laser (option) and USB socket Partnership Edition including: - Motorized width stop with 4 aluminum stops, which move synchronously. All 4 stops move up to 1,300 mm. The table is approx. 2,000 mm long. - Screen control (8'' touchscreen). The graphical interface offers the following functions: Tool database, angle cut calculation at the length stop, Cutting plans can be created and saved, programs can be saved USB can be saved, exported and imported. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade projection 350mm saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 - 350 mm, bore 30 mm - Rotation of saw blade: 4,000 rpm. - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min. - Total length: approx. 3,670 / 4,270 / 4,870 mm (depending on cutting length) - Weight: from approx. 1,150 to 1,550 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Suction nozzle: 1 x 100 mm, 1 x 120 mm Model variants: - CONCEPT 350 PLUS with 2,600 mm cutting length - CONCEPT 350 PLUS with 3,200 mm cutting length - CONCEPT 350 PLUS with 3,800 mm cutting length - CONCEPT 350 PLUS with 4,000 mm cutting length and bigger on request! ----- Price of the above-mentioned machine with equipment variant on request! ----- General options with extra charge: - 3410451 cutting line laser - saw motor with 7.5 kW (10 HP) including automatic star-delta Start-up - 41/03 programmable saw blade height adjustment - 3380132 Miter stop +/- 50° swiveling with length compensation, incl. Telescopic stop with folding stop - 3380135 Miter stop +/- 50° swiveling with length compensation, incl. 2 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension -3380136 Miter stop swivels +/- 50° with length compensation, including 3 Digital displays: 1 digital display for folding stop, 1 digital display for the stop on the telescopic extension, 1 digital display for the miter indicator - 3380138 additional support table 800 x 200 mm, can be attached - 3515013 Auxiliary stop for long, narrow workpieces, adjustable via scale (Support table 3380138 required) - 3515014 Auxiliary stop for long, narrow workpieces, adjust...

Condition: used, max. tool diameter , mm 0 , mm operating pressure , bar filling amount 52 l Quicksonic QS 520 Ultrasonic cleaning device with lid and work basket ----- Technical manufacturer's description: External dimensions (length x width x height): 560 x 460 x 510 mm Useful dimensions (length x width x height): 500 x 400 x 260 Useful basket dimensions (length x width x height): 444 x 364 x 224 Capacity: approx. 52 l Cehxsumng Ajy Tq Segt Ultrasonic power Rated power: 800 watts Peak power: 1600 watts Operating frequency: 40 or 25 kHz Mains voltage: L+N+PE, 230 V/50-60 Hz Heating power: 2000 watts Heating control: 30 - 85°C Timer: 0-15 min & Duration ----- All prices ex works plus packaging, transport, insurance, and statutory VAT. (Technical specifications according to the manufacturer - without guarantee!)

Condition: new, Working width 4000 mm Cohxy Tqjd Ih E Aj Ssgt Working height 2600 mm Number of cylinders 5 St. weight 2000 kg Dimensions (L/W/H) 5550x1300x3000 mm

Condition: new, Working width 3500 mm Working height 2300 mm Cgehsd Rzc Rsxy Tq Set Number of cylinders 4 St.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm Cgshod Ih H Noxy Tq Sot stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: new, Working width 3500 mm Cgehxy Tqjd Ih H So Sst Working height 2300 mm Number of cylinders 4 St.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2781 Weinig Unicontrol 6 Online ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser aiming light for detecting the saw section Length stop CNC controlled ----- > Length 3500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenon and slot spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 axially clocked feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g. glass-parted rungs) Rung guide consisting of: Rung support bar from above in the area of ??the profile milling unit vertically right and profiling spindle. Cgehxy Tqjv E R Ike Set Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 2 positions > Radial adjustment range 125 mm, 4 positions, manual Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 110 mm, 8 positions using pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.8 kW Other features ----- > online-capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-free rebating > Milling carriage for milling sashes with frame widths of less than 500 mm. Automatic pneumatic clamping. Minimum frame height 450 mm > Double parts package > Return conveyor for 1-man operation: swivel belt > Screen control > Studio window device > Electronic angle display for studio windows > Industrial PC, with Windows PC control/NEXUS Extraction nozzle diameter: -----...

Condition: new, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Cshxevzt D Tsy Tq Sogt Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Cgehxyevvx Dzj Tq Sot Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)