Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, TECHNICAL DETAILS Travel Paths X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical Drilling Unit X-Direction Drill spindles: 16 Z-axis stroke: 60 mm Drilling depth: max. 38 mm Rotation direction: right/left Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle pitch: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical Drilling Unit Y-Direction Drill spindles: 15 Z-axis stroke: 60 mm Drive: 1.5 kW Rotation direction: right/left Speed: 1,500 - 5,900 rpm Chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle pitch: 32 mm (15 spindles) Gedpfjxtng Nsx Ah Ejbw Spindle type: individually controllable Arrangement: Y-direction Horizontal Drilling Unit X-Direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: left Speed: 4,800 rpm Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal Drilling Unit Y-Direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: right Speed: 4,800 rpm Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling Motor Motor power: 7.5/10 kW (S1/S6 operation) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool Changer Magazine Magazine slots: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC EQUIPMENT Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air manifold with quick couplings Extraction hood for additional top router motor Top router 5 kW with hydraulic quick-clamping system Protective fence on the left with door Safety tread mat 3,250 mm Control cabinet on the left

Condition: ready for operation (used), functionality: fully functional, The following machine components have been renewed: Feed gearbox: Refurbished in 2023 Rotor: Factory-refurbished, installed in 2024 Hydraulic roller opening: Installed in 2022 Discharge unit: Newly installed in 2021 Infeed table: Year of manufacture 2021 TECHNICAL DETAILS Gedpexr Itysfx Ah Eobw Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Total length: 9800 mm Wheelbase: 8800 mm EQUIPMENT Spare parts package

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,350 mm, working height: 900 mm, workpiece height (max.): 150 mm, grinding belt width: 1,370 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 900 mm Workpiece thickness: max. 150 mm Abrasive belt width: 1,370 mm Belt speed: 18 m/s Contact roller diameter: 140 mm Feed belt system: length 3,400 mm Feed belt system: width 1,350 mm MACHINE DETAILS Weight: approx. 3,000 kg 1st unit: 18.5 kW 2nd unit: 15 kW Machine resistance: approx. 800 Pa Operating pressure: 6.8 bar Air consumption: approx. 28 l/min Feed drive: 0.7/0.9 kW (2 speeds) Feed speed: steplessly adjustable: 2.5–13 m/min EQUIPMENT Segmented sanding pad Gjdpfx Asxwnbboh Ejbw Combination unit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 06601, feed rate X-axis: 12 m/min, empty load weight: 2,500 kg, Equipment: CE marking, TECHNICAL DETAILS Maximum edge banding thickness: 12 mm Minimum workpiece thickness: 10 mm Maximum thickness of roll material: 3 mm Feed speed: 12 m/min Heating time: 10 min Guillotine for trimming: 0.2 – 3.0 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,500 x 1,000 x 1,600 mm Weight: 2,500 kg EQUIPMENT Jointing unit with 2 milling units Automatic roll magazine Solid edge magazine Pre-heating of panels by infrared heater Automatic gluing with granulate glue pot Cross-cut saw with programmable angle setting Multi-function unit Corner rounding/copying unit with 2 motors Profile scraper Flat scraper Buffing unit Gedpsxuqwmefx Ah Esbw Unit indicator with mechanical numeric display Control via operator panel Operation via selector switch / push buttons Protective hood CE marking

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Gbjdpfowuz Irox Ah Eew

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting depth: 3,300 mm, TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Cutting depth (material pusher positioning): 3,300 mm Cutting height: 90 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Gjdpfx Ahextfhwj Eebw Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Other Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Machine height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at infeed) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Performance and Speeds Main saw motor power: 15 kW Forward saw unit speed: 5 – 120 m/min Return saw unit speed: 120 m/min Forward feed speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Reverse feed speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 80709, plate height: 45 mm, empty load weight: 2,900 kg, operating speed: 333 mm/s, Equipment: CE marking, TECHNICAL DETAILS Maximum panel thickness: 45 mm Edge band thickness: 13-60 mm Maximum edge material thickness in rolls: 3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Working speed: 10 - 20 m/min MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,950 mm x 1,700 mm x 1,530 mm Weight: 2,900 kg EQUIPMENT Glue pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting edge trimming and chamfering unit RI 700 Compact edge scraper RBK501 Brushes SP700 Gjdpfxoxuqufs Ah Esbw Edge sanding unit LV 700 Heated infeed guide PLC control Panel support guide Large-diameter roll holder Edge cutting device for 3 mm thick rolled edges CE certification

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Godpfxswuz Dgj Ah Esbw Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm MACHINE DETAILS Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Gbjdpfoxtfchex Ah Eew Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 560, working width: 1,200 mm, working height: 800 mm, workpiece height (max.): 100 mm, empty load weight: 1,700 kg, throughput speed: 166 mm/s, TECHNICAL DETAILS Working height (carousel): 800 mm Working width: 1,200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min Spindles length: 6 x 100 x 350 mm Extraction: 2,500 m³/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,210 mm Net weight: 1,700 kg Electrical Data Voltage: 3 x 400/500 V - 50/60 Hz Max./Min. fuse: 32 A Gbjdpfx Ahsxuqr De Ejw Max. power consumption: 15 kW EQUIPMENT lock-itTM spindles

Condition: used, machine/vehicle number: 007466, Position 1: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Position 2: Brushing Machines SUPERFICI-BRAVOROBOT P1 Position 3: Spray Robots SUPERFICI-BRAVOROBOT P1 Position 4: Ovens SUPERFICI-BRAVOROBOT P1 Position 5: Roller Conveyors SUPERFICI-BRAVOROBOT P1 Gbjdswu Aa Nepfx Ah Eew Position 6: Roller Conveyors SUPERFICI-BRAVOROBOT P1

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 092323, feed rate X-axis: 24 m/min, working width: 230 mm, spindle diameter: 40 mm, working height: 125 mm, number of spindles: 5, TECHNICAL DETAILS Working width: 230 mm Working height: 125 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Feed speed: 24 m/min Feed motor power: 3 kW Gbsdoxuqm Uopfx Ah Eew Minimum material length: 400 mm Spindles Number of spindles: 5 Lower horizontal spindle power: 7.5 kW Right spindle power: 5.5 kW Left spindle power: 5.5 kW Upper horizontal spindle power: 7.5 kW Second lower horizontal spindle power: 7.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 370 cm x 200 cm x 190 cm Weight: 3,500 kg Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 EQUIPMENT Continuously adjustable feed Electronic height adjustment Electronic adjustment of the left head Feed via cardan shafts Five upper steel rollers Two upper rubber feed rollers Roller in the table feed Pneumatic material pressure Chromium tables CE marking

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Godpfoxn Nfvjx Ah Ejbw Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Gbedpfx Aewuzzroh Eew Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Gjdpfswuzzfox Ah Esbw Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Gjdpsxmgybjfx Ah Ejbw Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 008232, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Max feed speed: 8 m/min Gbedpfx Ahexf Dtps Ejw Maximum panel thickness: 40 mm Operating Units: 5 nr

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Gbodpfx Aou Huwceh Esw Max. panel length: 2400 mm Movement system: suction cups.

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Gbedpfx Ajxfhvzeh Eew Operating Units: 4 nr

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Gbjdpfxewuclxs Ah Eew Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 008188, Stock dimension length: 43000 mm Gbsdsxbph Rspfx Ah Eow Stock dimension width: 9000 mm

Condition: used, machine/vehicle number: 007906, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 32 m/min Maximum panel thickness: 60 mm Gedowucm Ajpfx Ah Eobw Operating Units: 12 nr

Condition: used, machine/vehicle number: 008073, Max working width: 3200 mm Gbjdpfswv Ddxsx Ah Eow

Condition: used, machine/vehicle number: 007702, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 95 mm No of Grippers: 9 Gsdpevap Eqjfx Ah Esbw

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Gedpot Hmt Iofx Ah Eebw