Condition: used, Year of construction: 2005, Control CNC Siemens 840D Cgsb E Teudc Syo R Skst feed - rapid adjustment 5000 mm/min max. workpiece dia. (internal machining) 200 mm

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Cob E Tst Utdpj R Sksgt Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: excellent (used), Year of construction: 1979, Functionality: fully functional, workpiece weight (max.): 800 kg, workpiece length (max.): 2,000 mm, workpiece width (max.): 400 mm, module thread tooth pitch (max.): 10, TECHNICAL DETAILS Workpiece width: 400 mm Workpiece length: 2000 mm Module: max. 8 / 10 Cgjbet R Sw Tj E T R Skot Processing length: 1850 x 160 mm Stroke: 180 mm Table surface: 360 x 2200 mm Cutting wheel diameter: 5 " Workpiece weight: 800 kg Cutting wheel mounting diameter: 1 3/4 " MACHINE DETAILS Total power requirement: 12 kW Machine weight: approx. 7.2 t Space requirement: approx. 5.5 x 2.3 x 2.4 m

Condition: good (used), Functionality: fully functional, The Höfler Helix 400 gear grinding machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the profile grinding of gears. Cjb E T R Sevd Ehpskegt Special features: Ideal machine for one-off production and small batches Technical data Wheel diameter: 400 mm Module - max.: 0.75-10 Tooth width: 200 mm Space requirement approx.: 3.0 x 4.5 x 2.5 mm Machine weight approx.: 8,500 kg *The illustration shows the machine in its current condition as a used machine and can be offered partially modernized or as a retrofit with new CNC control (Siemens ONE) and acceptance according to the manufacturer's standard on request.

Condition: used, Gear skiving machine LIEBHERR LK 200 Cjb Eouhbq Aj T R Skogt

Condition: repair required (used), Year of construction: 1989, Functionality: unexamined, Yağ kaçağı mevcut. Cgsb E T R Ssvb Uh Heket Çalışmıyor.

Condition: used, Year of construction: 2005, weight of the machine ca. 7.800 kg dimensions of the machine ca. 3.380 x 3950 x 3015 m Ceboudc S Hs E T R Skjgt

Condition: good (used), Year of construction: 2004, operating hours: 53,371 h, Functionality: fully functional, table bore: 80 mm, rotary table diameter: 145 mm, workpiece diameter (max.): 120 mm, spindle speed (max.): 30 rpm, TECHNICAL DETAILS Control: Siemens Sinumerik Table diameter: 145 mm table bore: 80 mm Table speed: max. 150 rpm Workpiece outer diameter: max. 120 mm Shaping head Normal module: max. 5 mm Bevel angle: max. 45 degrees Stroke rate: min. 250 DH/min Stroke rate: max. 1,500 DH/min Shaping spindle speed: min. 0.0076 rpm Shock spindle speed: max. 30 rpm Drive power lifting drive: 17 kW Stroke position adjustment range: 70 mm Stroke length: max. 55 mm C1 axis Travel: Endless Working range: Endless Working/rapid traverse speed: 30 rpm Reference point: - C2 axis Travel distance: Endless Working range: Endless Working/rapid traverse speed: 150 rpm Reference point: - X1 axis Travel distance: 242 mm Working range: min. - 25 mm, max. 217 mm Working/rapid traverse speed: 3,750 mm/min Reference point: 203.105 mm Z3 axis Travel: Endless Working range: Endless Working/rapid traverse speed: 1,500 1/min Reference point: 270 grd B4 axis Travel distance: Endless Working range: Endless Working/rapid traverse speed: 1,500 1/min Reference point: 270 grd C3 axis Travel distance: Endless Working range: Endless Working/rapid traverse speed: 40 1/min Reference point: 0 grd Z4 axis Travel distance: 300 mm Working range: 300 - 600 mm Working/rapid traverse speed: 17,000 mm/min Reference point: 525 mm Csb E T R Soulwllokogt MACHINE DETAILS Operating voltage: 400 V Total weight: 8 t

Condition: new, Year of construction: 2022, operating hours: 235 h, Control: Fanuc 31iB Maximum module: 2.3 (in direct relation to installed rollerhead diameter) Roller head diameter (mm): 90 Workpiece spline diameter range (min. root-Ø to max. major-Ø) (mm): 20 - 80 Max. spline length (mm): 250 Possible number of splines in continuous/indexing pitch mode: freely programmable Space between spindle nose and roller head carrier (LW, in mm): 200 - 1’950 Cgjb E T Ropq Nv Ij Skot Workpiece and chuck diameter (mm): 315

Condition: refurbished (used), Functionality: fully functional, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single flank rolling tests on bevel gears with evaluation Picture shows machine in actual condition as retrofit / modernized. Performance description: Wheel diameter: 450 (300) mm Axle angle: 90 degrees Hypoid: +/- 60 mm Cgsb E T Rstncnhj Skst Space requirement approx.: 1.4 x 0.8 x 1.5 mm Machine weight approx.: 1,100 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to prior sale

Condition: used, EQUIPMENT - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm] Cgsbeuhbqpj E T R Skst

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Gleason Pfauter G320 CNC generating grinding machine + Promot Automation handling unit Functionality and machine features Generating grinding machine with 8 numerically controlled axes for machining gears with straight and helical teeth that can be produced by generating, including a dressable worm profile wheel. Linear and rotary main axes are hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. TECHNICAL DETAILS Control: Siemens 840 incl. control panel Module: 0.5-7.0 Workpiece diameter: 10 - 380 mm Number of teeth: 10 - 600 Vertical slide stroke Z: 200 mm Horizontal slide stroke X: 230 mm Tangential slide stroke Y: 135 mm Swivel angle of clamping head A: ± 45° Stroke - tailstock center: 125 mm Tangential slide stroke - dressing V: 180 mm radial slide stroke - dressing U: 110 mm C-axis (table rotation): 360° rapid traverse speed - linear axes: 10,000 mm/min Rotation speed: 3,000 rpm (infinitely variable) Table rotation speed: 240 rpm Table resolution: 0.001° Processing feeds: stepless Working feeds: infinitely variable Grinding wheel diameter: 270 - 350 mm Grinding wheel width: 104 mm Grinding wheel bore: 160 mm MACHINE DETAILS Machine weight: 11,500 kg Machine space requirement: approx. 3.7 x 2.4 x 2.75 m Promot Automation space requirement: approx. 4.5 x 1.6 x 4.0 m EQUIPMENT - Promot automation - Conveyor belt Cgeb E T R Setu T S Uokot - Cooling belt system - Hydraulic unit - Complete documentation

Condition: used, Year of construction: 1998, max. wheel diameter . mm gear width . mm max. module . min. module . Control total power requirement kW Cgsbsucgwwe E T R Skjt weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,30x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees + 30 / -30 Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees 0.001 Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm 0.001 tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 Cgeb E T R Ssvnmn Ssket weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/230 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 3000 Workpiece drive C2 27.0 3000 X-axis 20.0 3000 Z-axis 20.0 3000 U-axis 6.0 3000 Vertical portal (V1 axis) 6.0 3000 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 3000 Loading slide (X1 axis) 5.0 3000 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 2700 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, We use this machine in our subcontracting department. The machine is equipped with a loading and unloading conveyor and fully automated with a gantry type loader. Cgjbopuxc Us E T R Skjt The machine is mainly used for cold forming of splines in sheet metal parts, it also has a spinning option (form-ing disks into drums). Control: Fanuc 840 D This machine is also suitable for solid material applications, max. module: ~ 5.5 Roller head diameter (mm): 205 Workpiece spline diameter range (min. root-Ø to max. major-Ø) (mm): 30 – 230 Max. spline length (mm): ~120 Possible number of splines in indexing pitch mode: 18 – 36, expandable to 46 Space between spindle nose and roller head carrier (LW, in mm): 56 - 1086 Workpiece and chuck diameter (mm): ~300

Condition: good (used), Model No. WNC 80 KLINGELNBERG “CNC” spiral bevel gear grinding machine suitable for the hard finishing of spiral bevel and hypoid bevel gears and pinions which are pre-machined with cutter heads in either face-milling or face-hobbing processes up to 31.49” (800mm) pitch diameter, DP 25 TO 1.4 (module 1 to 18) and 5.12” (130mm) maximum face-width, utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified type, employing the on-board dressing device with diamond dressing roll The machine corresponds to the attached copy of factory literature, featuring the following: FEATURES / EQUIPMENT: Cob Ejpxnlzs T R Skegt • Machine with double-spindle wheelhead design allowing the convex and concave tooth flank to be ground and finished in one single operation • Double-spindle wheelhead also provides possibility of rough and finish grinding separartely, with two grinding spindles equipped with one roughing and one finishing wheel. • Stationary dressing unit at the back of the machine base, with dressing spindle which can be swiveled via hydraulic cylinder into the work range of the machine for dressing of the grinding wheels • Swivellable stock dividing device for centering dressed grinding wheels • Full machine enclosure, with sliding door and safety-glass window, and integrated electrostatic oil-mist suction device • IBH “CNC” control with color CRT and spiral bevel gear grinding software with user-friendly conversational dialogue programming, with data interface directly from a central computer. o DNC- Software as basic program for the different Software options o Grinding of spiral bevel gears according the Wiener " 2 Spur process ". o Grinding of the concave and convex flank with two different wheels and with different machine set-up parameters. o Generating & plunge grinding cycles (Formate gears, face couplings). o Software for grinding Gleason gears and pinions. o Servomotors and drives from Bosch/Rexrroth   • Machine and IBH controller in “optional” 6-Axis execution with the following motorized movements CNC-controlled: A-Axis (Machine distance adjustment axis) X-Axis (Tooth depth adjustment and plunge advance axis) Y-Axis (Rotation axis) Z-Axis (Workpiece rotation axis) V-Axis (Mounting distance adjustment axis) W-Axis (Axial offset adjustment axis) • Central lubrication system and hydraulic aggregate incorporated within machine’s full enclosure with easy-access panels for maintenance • Full complement of electrics (motors/controls), air-conditioned electric switch-gear cabinet, buss-ducting, conduit, arranged for 480 Volt, 60 Cycle operation • Complete coolant plant (HOFFMANN ERK-75V) with cooler-chiller, and paper-band filtration unit with delivery capacity of 120 l/min. at a pressure of 10 bar • Two (2) grinding wheel flanges • One (1) diamond dressing wheel • Full machine documentation (operator’s manual for the machine and controller, electrical and hydraulic diagrams, parts list, etc.)

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] Ceb E T Rsuhbp Ee Skjgt - tool holder spindle speed : 3000 [Rpm] - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] EQUIPMENT - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device

Condition: like new (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 61373, IT IS IN WORKING CONDITION Ceb Eovwlf Is T R Skegt

Condition: used, Year of construction: 1986, max. wheel diameter . mm gear width . mm max. module . min. module Control total power requirement kW weight of the machine ca. 7 t Cgjb Eeucgw Dj T R Skjt dimensions of the machine ca. m

Condition: good (used), Year of construction: 1977, Functionality: fully functional, machine/vehicle number: 150-5036, Used in working condition Csbevvrh Hj E T R Skjgt

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, wheel width: 380 mm, TECHNICAL DESCRIPTION: Linear axes: – Radial slide (X-axis) – Tangential slide (Y-axis) – Axial slide (Z-axis) - Tailstock (Z4-axis) Rotary axes: – Milling head (A-axis) – Workpiece table (C-axis) – Swivel gripper for automatic workpiece change (E-axis) Spindle: – Milling cutter (S-Spindle) Csb E T Rovdnm Us Skjgt TECHNICAL DATA: – Control: SIEMENS SINUMERIK 840D Gear hob: – Largest permissible tip diameter: 130 mm – Greatest length (depending on milling arbor diameter): 220 mm - the max diameter of gear 380mm (depending of diameter of Hob) MACHINE Milling arbors: – Diameter: 40 mm – Acquisition cone: Steep cone ISO 40 Sledding trails: – Radial (X-axis): 185 mm – Tangential (Y-axis): 200 mm – Axial (Z-axis): 250 mm Largest milling head swivel angle: – Direction +A: 35° – Direction -A: 45° Workpiece table: – Outer diameter: 300 mm – Boron: 80 mm Speeds Rapid traverse/Feeds: – X-axis: 10.000 mm/min – Y and Z axis: 5.000 mm/min Drehzahlen: – Tool: 90 – 900 rpm – Workpiece table: 1 – 55 rpm Electrical equipment: – Operating voltage: 380/400 V – Supply voltage: 230 V – Control voltage: 24 V – Frequency: 60/50 Hz – Connected load of the machine: 48 kVA – Cable cross section: 25 mm2 – Protection: 100 A Overall dimensions of the machine: – Length/Width/Height: 6.435 x 4.930 x 3.210 mm – Machine weight approx: 11500 kg EQUIPMENT: – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation Notes: Machine with Load conveyor Machine in excellent condition Complete maintenance 12/2024 Machine with Dialog Program

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 Control weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m Cgeb E T Rjucgw Rs Skjt

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 26182, used Cgob E T R Sjvu Tdasket it is in working condition

Condition: good (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 70303, workpiece weight (max.): 60 kg, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, overall weight: 4,800 kg, power: 16 kW (21.75 HP), Fully functional Cgob E T R Sjtrxp Dskst

Condition: good (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 63577, workpiece weight (max.): 60 kg, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, power: 16 kW (21.75 HP), Fully functional Ceb E T Rotrwibo Skegt