Condition: good (used), Year of construction: 2014, Functionality: fully functional, Model ⇒ TNL 18-7 Control ⇒ Traub TX 8i-s Workpiece length (max.) ⇒ approx. 200 mm Workpiece diameter (max.) ⇒ 20 mm Main Spindle: Speed ⇒ 12,000 rpm Power ⇒ 5.5 kW Spindle passage ⇒ 18 mm Measurement system resolution Z ⇒ 0.001 mm Counter Spindle with Tool Turret: Speed ⇒ 12,000 rpm Delq Sswg Dulo T Rdjkl Power ⇒ 3.4 kW Workpiece Ø (max.) ⇒ 21 mm Workpiece clamping depth (max.) ⇒ 180 mm Clamping pressure (max.) ⇒ 30 bar Upper Tool Turret: ⇒ 8 stations Tool holder ⇒ Traub Ø 45 Traverse path X/Y/Z-axis ⇒ 120//-25/+40//250 mm Rapid traverse X/Y/Z-axis ⇒ 20/20/40 m/min Resolution X/Y/Z-axis ⇒ 0.0005/0.0005/0.001 mm Lower Tool Turret: ⇒ 7 stations + counter spindle Tool holder ⇒ Traub Ø 45 Traverse path X/Y/Z-axis ⇒ 120//-20/+40//250 mm Rapid traverse X/Y/Z-axis ⇒ 20/20/40 m/min Resolution X/Y/Z-axis ⇒ 0.0005/0.0005/0.001 mm

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, Functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm Dkelq S Tsv Uh Nds Rdol - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: used, Year of construction: 1964, faceplate diameter 800 mm turning diameter over slide rest 1000 mm turning length max. 600 mm main spindle speeds: 16 - 500 U/Min total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 3,0 x 2,8 x 2,0 m Dkelq S Tewhqr Ho Rdsl Manual 4-jaw faceplate 2 upper slides 4 machine shoes

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,004 h, Control Unit Brand FANUC Main Drive Number of axis 8 Media Chip conveyor Yes Dslq Sswgf Aqo T Rdokl Additional Equipment ROBOBAR SSF automatic bar loader Motorized tools Main spindle and sub-spindle Tool holders Collets This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine. Application Types Turning

Condition: used, Year of construction: 2012, travel distance X-axis: 830 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 4,500 rpm, turning diameter: 150 mm, total height: 3,000 mm, overall weight: 15,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 DSL, number of spindles: 2, space requirement length: 4,300 mm, space requirement width: 2,550 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 DSL BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 WORKING RANGE TURNING .. turning diameter (max): 150 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min X/Z SLIDE .. Z-axis travel: 180 mm .. X-axis travel: 830 mm .. traverse velocity Z (max): 3000 mm/min .. traverse velocity X (max): 60000 mm/min .. number of tool positions (total): 12 Dslq Sov Uv Eto T Rdekl ELECTRICAL SPECIFICATIONS .. mains voltage: 24 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4300 mm .. space requirements -front/back-: 2550 mm .. total height: 3000 mm .. total weight approx.: 15000 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. band filtration unit: yes .. coolant through turret: yes .. through spindle coolant attachment: yes .. hydraulic system: yes .. European CE standards: yes Technology: Double spindle vertical turning center - 2 x main spindle (left + right) - max. chuck Ø 215mm - Knoll chip conveyor - Machine-centered feed belt with robot gripper

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Dkolq S T Rswgwnljdsl weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1994, faceplate diameter 1400 mm 51228 table turning speeds 315 U/min turning height 1500 mm swing dia. max. 1750 mm Djlqewgi N Us S T Rdokl

Year of construction: 1999, Condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Dkslq Soktfiao T Rdsl Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Condition: used, Year of construction: 2008, turning diameter max. 140 mm swing diameter Futter / Chuck Ø 250 mm turning height 630 mm Control SIN840 PL spindle turning speed - stepless 1 - 5.000 U/min power capacity at 40 % load 38,00 kW Spindle head DIN55026 - Size 6 spindle diameter in front bearing 110 mm travel -x axis 300 mm feed X-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min feed force X axis 9.000 N travel -z axis 700 mm feed Z-Axis 1 - 40.000 mm/min rapid traverse Z-axis 40,00 m/min feed force Z axis 10.000 N no. of tools in turret 1 12 no. of tools in turret 2 12 tool taper VDI 40 DIN 69880 total power requirement 70 kW weight of the machine ca. 25 t dimensions of the machine ca. 6,8 x 4,7 x 4,3 m Chip conveyor Dkelq S T Rowhqrtjdel Spindle cooling system HYFRA Coolant system Knoll

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 5500 Workpiece Dslewgf Awsq S T Rdskl Workpiece drm 15 mm Workpiece X 300 mm This EUBAMA S8 rotary transfer machine was manufactured in 2004. It handles parts up to 15 mm in diameter and approximately 300 mm in length. It operates on a 24 V control voltage and requires a 400 V, 50 Hz electrical connection. Weighing a maximum of 5.5 tons, the EUBAMA S8 machine we have for sale is robust and reliable. Contact us for further details regarding this rotary transfer machine. Application Types Turning

Condition: used, Year of construction: 2004, turning length: 850 mm, turning diameter: 600 mm, spindle speed (max.): 4,500 rpm, total height: 2,500 mm, overall weight: 11,000 kg, bar passage: 82 mm, bar diameter: 82 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, machining diameter: 600 mm, number of spindles: 2, space requirement length: 6,000 mm, space requirement width: 2,300 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 D BASIC FUNCTIONS .. number of spindles: 2 .. number of x/z slides: 2 .. number of turrets: 2 .. live positions: yes .. number of c-axes: 2 WORKING RANGE TURNING .. swing diameter (max): 600 mm .. turning diameter (max): 290 mm .. bar diameter (max): 82 mm .. worpiece length max.: 850 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min .. spindle bore diameter: 65 mm Dkolq S Tjv Uv Ego Rdjl .. c-axis: optional COUNTER SPINDLE .. spindle revolutions (max): 4500 /min .. c-axis: yes X/Z SLIDE .. tool fixture: Turret ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 2300 mm .. total height: 2500 mm .. total weight approx.: 11000 kg

Condition: excellent (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ Vertical Model: M1 Plus Manufacturer: DMGMORI Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Delq Sjwg Txgo T Rdekl Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Equipment - Main spindle 10,000 rpm 13/9 kW - 24-place chain magazine - SK40 - Chip conveyor - Renishaw measuring probe - Coolant spray gun Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg (Errors in the technical data and information excepted)

Condition: used, Year of construction: 1992, faceplate diameter 1120 mm swing diameter 1250 mm turning height 1000 mm workpiece weight 4000 kg faceplate speeds from - to 1,25-315 U/min cross travel of ram-slide 775 mm vertical head swivelling 45 Grad Dkelq S T Rjv Anlhedol ram stroke - vertical 700 mm feeds 5,45 - 2000 mm/min total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. 2,7 x 2,9 x 4,1 m Machine was modernized and overhauled in 2014 for an amount of more than 100.000,- Euro and does have a digital positioning control.

Year of construction: 2003, Condition: excellent (used), Citizen M32 V CNC automatic lathe Max. Machining diameter: 32 mm Max. Machining length: 320 mm per chuck Max. Diameter for frontal drilling: 12 mm Max. Diameter for frontal tapping: M10 Diameter of spindle passage: 36 mm Main spindle speed: 200 - 8000 rpm Change of main spindle speed: digits S + 4 without graduation Step feed of the main spindle: 1°. C-axis of the main spindle: 0,001°. Max. Clamping diameter of counter spindle: 32 mm Max. Length of the part to the front during backward machining: 145 mm Max. Protrusion of the parts from the counter spindle: 65 mm Max. Drilling diameter in backward machining: 10 mm Max. Max. threading diameter in backworking process: M8 Counter spindle speed: 200 - 7000 rpm Graduated speed change, counter spindle: digits S + 4 without graduation Graduated feed rate, counter spindle: 1°. C axis of the counter spindle: 0.001°. Tool spindle of tool holder 1 Max. Drilling diameter: 7 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle from tool holder 2 Max. Drilling diameter: 10 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle of the counter spindle tool holder Max. Drilling diameter: 7 mm Max. Max. thread diameter: M6 Spindle speed, stepless: From 200 - 5000 rpm Count of step feed for turret station: 20 Number of mountable tools: Up to 21 tools Rotary chisel in tool holder 1: 5 tools Driven tools in tool holder 1: 4 tools Tools in tool holder 2: 3 tools Tool holder for turret tool holder: Ø36-Ø12 (positioning pins) Tool dimension tool, tool holder 1: 16 x 16 x 130 mm Tool, tool holder 2: 16 x 16 x 90 mm Sleeve (tool holder 2): Ø 25.4 mm Sleeve (counter spindle tool holder): Ø 25.4 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 1): Ø 10 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 2): Ø 10 mm / Ø 60 x Ø 15.875 Ø 63 x Ø 16 Ø 60 x Ø 25.40 / Ø 63 x Ø 22 Ø 32 x Ø 10 / Ø 80 x Ø 15.875 Rapid traverse Dkslq Ssktffdj T Rdjl X1, Y1, Z1: 20 m/min X2, Z2: 20 m/min Y2: 8 m/min X3, Z3: 20 m/min Smallest increment X1, Y1, Z1: 0.001 mm X2, Y2, Z2: 0.001 mm X3, Z3: 0.001 mm Axis stroke X1: 108 mm Y1: 275 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 202 mm X3: 238 mm Z3: 410 mm Bar length: 2500 mm Central height: 1132 mm Motors 2,2 / 3,7 kW 3,7 / 5,5 kW For control of guide bush: 0,75 / 1,5 kW For control of counter spindle: 0,75 / 1,5 kW For tool spindle of tool holder 1: 1 kW For tool spindle of tool holder 2: 0,75 / 1,5 kW For tool spindle of counter spindle tool holder: 0,75 kW X1: 0.4 kW Y1: 0,75 kW Z1: 0,75 kW X2: 1 kW Y2: 0.75 kW Z2: 0,75 kW X3: 0,75 kW Z3: 0,75 kW T1: 1 kW For main spindle chuck: 0,2 kW For counter spindle chuck: 0,2 kW For the extractor: 0,2 kW For unloading the products from the machine: 0,2 kW For the coolant: 0,4 kW For the lubricating oil: 0,004 kW Dimensions: 2770 x 1370 x 1820 mm Weight: 3100 kg For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, Year of construction: 2002, turning diameter 330 mm swing diameter 610 mm turning length 1500 mm control Mazatrol Fusion 640 MT spindle bore 88 mm turning speeds 35 - 3000 U/min milling head speed 15 - 10.000 U/min x-axis 580 mm y-axis 230 mm z-axis 1695 mm C-axis 0,001 ° tool magacine with 40 tool taper Capto C6 total power requirement 32,7 kW weight of the machine ca. 9650 Kg dimensions of the machine ca. 5,9 x 2,4 x 2,2 m Röhm Duro-NC 320/3 chuck; without chaws and chuck key Tool-Eye Renishaw Probe prepared; Probe not available Tailstock Chip conveyor Dkjlqswhqrms S T Rdol

Year of construction: 1998, Condition: ready for operation (used), General Data Machine weight 5000 kg Control Unit Brand MAZATROL Model T Plus Main Drive Spindle speed range 4000 rpm Spindle motor power 18.5 kW Turret Number of turrets 1 Tools Number of station 12 Additional Equipment Parts Catcher and Parts Counter Dkelqswdbc Is S T Rdel This Mazak SQT 250M was manufactured in 1998. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders Delq S T Rsvwgpbjdekl

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm Dkslq Sewgi D Ej T Rdel control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: excellent (used), STAR SR-20R sliding headstock automatic lathe TECHNICAL DATA Spindle diameter: 20 mm turning length: 205 mm Speed range - spindle: 500 - 12,000 rpm Drive power, spindle motor: 2.2 / 3.7 kW Travel X: 265 mm Dkolqju Hkh Rs S T Rdol Speed range, counter spindle: 500 - 8000 rpm Drive power, counter spindle motor: 1.5 / 2.2 kW C-axis: 0.001° 19 tool positions: Linear tool holder, front attachment, rear machining SCOPE OF OFFER U.A: (list not exhaustive): STAR SR-20R sliding headstock automatic lathe LNS bar loader transformer Coolant tray Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information

Condition: used, Year of construction: 2004, turning diameter 520 mm turning length 3000 mm control SIN 840 D Siemens z-axis 3150 mm Feed z- axis 1 - 40000 mm / min rapid traverse Z-axis 40 m/min x-axis 600 mm feed x-axis 1 - 30000 mm/min rapid traverse X-axis 30 m/min Main spindle S1 spindle turning speed - stepless max. 4000 U/min power capacity at 100 % load 29 kW Djlowhqtwjq S T Rdskl spindle head DIN 55026 - Size A8 / DIN 55026 spindle diameter in front bearing 140 mm spindle bore 77 mm C-axis 360 x 0,001 ° milling spindle S3 tool taper HSK 63 turning speed range - stepless 1 - 9000 U/min y-axis -100 / +150 mm B - axis -110 / +110 ° Opposed spindle S2 spindle turning speed - stepless max . 4000 U/min tool magacine with 100 slots rated current 168 A output 117 kVA total power requirement 145 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,40 x 4,90 x 3,20 m Main / counter spindle with hydr. Power chuck SMW-Autoblok KNCS-N 225-65 Partial hollow clamping Ø60x1000mm in main and counter spindle possible SMW steady rest type KLU-222-ZSW (Ø20-254mm) Coolant band filter system POLO SB-A0.4 pressureless volume V1=100L/V2=1100L Chain oil skimmer Flexo Cooling lubricant care Hamma Mikro 1000 electronic hand wheel Infrared probe Pickup station for 3 tools max. length 1000mm Tool changer with double gripper Integrated extraction system LTA AC3001 R Solid chip conveyor leveling elements wooden grates

Year of construction: 2008, operating hours: 2,583 h, Condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 200 mm Z-Axis Movement 455 mm Dkjlq Sewh A Rhe T Rdsl This Hurco TMM8 horizontal turning machine was manufactured in 2008. It features a robust design suitable for a variety of turning applications. Ideal for those seeking reliable performance in metalworking. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Delqswg Take S T Rdskl Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 2822 Measurements depth 2050 Measurements height 3491 Machine weight 11000 Control Unit Brand FANUC Model 0i-TD Main Drive Spindle speed range 2000 Spindle bore 104 mm Tool taper A2-11 (ASA) Movement X-Axis Movement 430 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 20 m/min Workpiece Dkelq S Tovg Tars Rdsl Workpiece drm over bed 890 mm Workpiece drm 810 mm This 3-axis SMEC PL 800VM RH vertical turning machine was manufactured in 2014. It features a maximum swing of Ø890 mm, turning diameter of Ø810 mm, and a turning length of 800 mm. Equipped with a Fanuc 0i-TD control and a 10.4” TFT LCD color monitor, it offers a spindle speed of 2000 rpm and a tool turret with 12 stations. Ideal for robust and precise machining. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,000 h, Control Unit Brand MAZATROL Model Matrix Voice Adviser Main Drive Spindle speed range 5000 rpm Spindle motor power 22 kW Number of axis 5 Movement X-Axis Movement 580 mm Djlqewg Ic Hs S T Rdskl Y-Axis Movement 1045 mm Z-Axis Movement 160 mm Tools Number of index 80 Type of tool holder Capto C6 Media Chip conveyor Yes Additional Equipment High-pressure cooling through the spindle, 15 bar Automatic door Robot interface 1 pc. 3-jaw chuck Kitagawa BB08 1 3-jaw chuck Kitagawa B208 This 5-axis Mazak Integer 200-IV S x 1000 turn-mill centre was manufactured in 2010. Ideal for complex machining tasks, it offers versatility and precision in both turning and milling operations. Consider the opportunity to buy this Mazak Integer 200-IV S x 1000 turn-mill centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1500 Measurements depth 3900 Measurements height 3200 Machine weight 7000 Control Unit Model SINUMERIK 840Dsl with integrated PLC S7-300 Brand SIEMENS Main Drive Spindle speed range 4500 Spindle motor power 18 kW (100% duty cycle), 28 kW (40% duty cycle) Tool taper DIN 55026 - A6 Movement X-Axis Movement 745 mm X-Axis Feed Force 10 kN X-Axis Rapid Traverse 60 m/min Z-Axis Movement 300 mm Z-Axis Feed Force 10 kN Z-Axis Rapid Traverse 30 m/min Dkelqjwg Icao S T Rdsl Workpiece Workpiece weight 6 kg Tools Slots in storage 12 Additional Equipment Hydraulic 6-jaw special chuck from EMAG with face clamping device and central lubrication 15-inch TFT monitor V24 interface This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 28kW at 40% duty cycle, it's ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us. Application Types Turning