Condition: excellent (used), Year of construction: 2020, Maximum cutting diameter 150mm, spindle bore 31.75mm, distance between centre 457mm, Dolnjwcp E Uj U N Trout swing over carriage 230mm, swing 280mm, spindle speed 50-4000rpm, spindle power 3Hp, Compound slide travel 76mm, cross travel 152mm, 3 & 4 jaw chucks, fixed steady, digital screwcutting, taper turning attachment , coolant.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Deln U Neuy S Sde Treut Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Year of construction: 1999, operating hours: 55,234 h, Condition: ready for operation (used), General Data Measurements width 2100 mm Measurements depth 2660 mm Measurements height 1780 mm Machine weight 6000 kg Control Unit Model U - 100L Main Drive Number of spindles 2 Spindle speed range 6000 rpm Spindle motor power 7.5 kW Spindle bore 53 mm Movement X-Axis Movement 195 Z-Axis Movement 700 Turret Number of turrets 2 Additional Equipment Number of tools: 12 This 3-axis Okuma LT 10-M horizontal turning machine was manufactured in 1999. It features a maximum turning length of 130 mm and a turning diameter of 210 mm. With a spindle speed of 6000 rpm and motor power of 7.5 kW, it's designed for precision. Ideal for those looking to buy this Okuma LT 10-M horizontal turning machine. Contact us for more information. Application Types Deljwg Ib Nsn U N Treut Turning

Condition: used, _____ Description: Year of manuf. : 2023 Control : Siemens SINUMERIK 828D Turning diam. : 560 mm Djlewgg T Rjn U N Trout Turning length : 1000 mm Mainspindle: Technology:belt-driven spindle Speed (max.):4500 rpm Power (max.):15 kW Bar capacity:65 mm Workpiece clamping:3-jaw chuck; Autogrip 3H-210 Tool carrier (X/Z): Technology:Turret with 12 stations (BMT-interface) Tool holder:BMT-interface Traverse path X / Z:200 / 1050 mm Rapid traverse X / Z:30 / 30 m/min Tailstock: Technology:programmable Travel:900mm Cone:MK5 Equipment/Accessory: Chip management:chip conveyor with chip bucket Coolant management:high-performance coolant system with coolant pump Raw material feed:bar feeder interface Set-up mode:electronic handwheel Lubrication management:automatic central lubrication Other equipment:work light; flushing gun

Condition: good (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, travel distance Y-axis: 400 mm, rapid traverse X-axis: 300 m/min, rapid traverse Z-axis: 425 m/min, Chiron machining center type FZ 15 W high speed with chip conveyor year 2001 with turntable 12,000 rpm internal cooling. Doln Ujvtca Uj N Trout X 300 Y400 Z 425 2 pcs available more pictures can be sent

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm Duslnefmd Dhj U N Trot MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, spindle bore: 32 mm, turning diameter: 300 mm, center height: 180 mm, center width: 900 mm, turning length: 900 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 60 rpm, Equipment: rotational speed infinitely variable, Vario L+Z Lathe Inv. No. Manufacturer: Huvema Type HU 900 Vario Technical Specifications: * Center height 150 mm * Center width 900 mm * Turning diameter 300 mm Delnswh Ux Do U N Trout * Spindle bore 38 mm * Spindle speeds 60-2200 rpm. Vario * Newall digital readout * 3-jaw chuck * Weight approx. 450 kg

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Duelnjuy S R Tj U N Trjt Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Dslnjwf Acle U N Trjut Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS: CNC Control: MAZATROL 640 T X-axis mm: X-axis mm: 190 Z-axis mm: Z-axis mm: 515 Y-axis mm: Y-axis mm: - Maximum Turning Diameter mm: / Max. Turning Diameter mm: 350 Cº Axis Increase: - Maximum Turning Length: Max. Turning Length mm 515 Cutting feedrate mm / min X, Z, Y: Cutting feedrate mm / min X, Z, Y Swing over bed mm: Ø 575 Deln U Newdwmpe Trjut Swing over slide mm: Over cross slide mm: Ø 510 Bar work capacity mm: Ø 77 Rapid traverse max. mm / min X, Z, Y: Rapid traverse max. mm / min X, Z, Y: 30,000 / 33,000 Main Spindle L-SPINDLE 250 mm Spindle speed rpm: Spindle speed rpm: 35 - 4,000 Spindle power kW: Spindle power kW: 26 Torque Nm: Torque Nm: - Spindle bore Main mm - Spindle nose Main A2-6 Turret Positions Upper Turret Positions: 12 Number of rotating tool stations (Each turret): 12 Rotating tool speed: Rotary Tool power: EQUIPMENT: Chip Conveyor Cooling System Turret Plate 250mm - Chuck 250mm Counter point - Tailstock MACHINE DIMENSIONS: Length mm / Length mm: 3,500 Width mm / Width mm: 1,700 Height mm / Height mm: 2,000 Weight kg / Weight kg: 6,000

Condition: used, Year of construction: 2004, travel distance X-axis: 320 mm, travel distance Z-axis: 1,250 mm, total height: 2,525 mm, controller manufacturer: SIEMENS, number of spindles: 2, space requirement length: 6,900 mm, space requirement width: 2,200 mm, CONTROLS .. CNC controls SIEMENS BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 2 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 1 .. number of b-axes: 1 Doln U Newf Hgzj Trout X/Z SLIDE .. Z-axis travel: 1250 mm .. X-axis travel: 320 mm .. tool fixture: Turret .. number of tool positions (total): 12 X/Z SLIDE .. Z-axis travel: 1250 mm .. X-axis travel: 214 mm .. tool fixture: Turret .. number of tool positions (total): 10 TOOL MAGAZINE .. magazin type: disc magazine .. number of positions: 32 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6900 mm .. space requirements -front/back-: 2200 mm .. total height: 2525 mm

Year of construction: 2003, Condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Dsln U N Teglf A Hsrsut Turning diameter max 200mm Turning length -635mm Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2013, operating hours: 69,000 h, Condition: ready for operation (used), General Data Measurements width 1890 mm Measurements depth 2140 mm Measurements height 2050 mm Machine weight 5600 kg Control Unit Brand FANUC Model Series 0i-TD Main Drive Number of spindles 2 Spindle speed range 4000 Spindle motor power 11/7.5 kW Movement X-Axis Movement 150 mm X-Axis Rapid Traverse 24 m/min Dueln U Nowgqaze Trst Z-Axis Movement 160 mm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 2 Media Power consumption 43 kVA Additional Equipment 20 pcs tool holders This Takamaz XW-130 Lathe was manufactured in Japan in 2013 and has been operative for 69000 hours, from which 40000 are cutting hours. This machine incorporates 2 turrets each with 8 positions. 20 pcs tool holders are included. Application Types Turning

Condition: used, Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 540 mm, spindle bore: 90 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 540 mm, quill stroke: 120 mm, Cycle Lathe Manufacturer: Monforts Type: KNC8S Year of Manufacture: 2002 Turning Diameter over Bed: 830 mm Turning Diameter over Support: 540 mm Turning Length: 3000 mm Tailstock: MK6 Quill, Stroke: 200 mm Chip Conveyor, Multifix Tool Post, Size D 4 Gears: 1. 1 - 225 rpm 2. 5 - 560 rpm 3. 7 - 900 rpm 4. 18 - 1600 rpm Accessories: 4 Tool Post Holders 2 Steady Rests Faceplate: 700 mm 3-Jaw Key Bar Chuck Dueljwfhh Hen U N Trot The machine is in used condition and is fully functional.

Condition: ready for operation (used), Year of construction: 2006, Optimum lathe D320 x 920. Machine has also been in a school! Center height: 160 mm Distance between centers: 920 mm Spindle speed: 65 – 1800 rpm, 18 steps Turning diameter above support: 178 mm Turning diameter with extended bed bridge: 430 mm Turning length in the bed bridge: 115 mm Spindle taper: MK 5 Spindle mounting: Camlock ASA D1-4 Spindle bore: 38 mm Top slide travel: 85 mm Dsln U N Towh U A Aerjut Cross slide travel: 165 mm Back seat taper: MK3 Spindle stroke: 110 mm Longitudinal feed (32): 0.4 mm/rev. When purchasing 3 pieces, special price!

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Lead and pull spindle lathe Weiler Commodor *partially overhauled* Item number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter of bed: approx. Ø380mm Max. turning diameter support: approx. Ø190mm Max. turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed ​​range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic longitudinal and planar feeds: Feed range: approx. 0.011-0.80 mm/rev Suitable for threads: metric 0.30-10mm inch 80-2 3/4 G/'' Diametric pitch thread 80-5.5 Dp module 0.2-5 Tailstock: MK4 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 200mm *New* Quick-change holder size B + 1 insert Bed stop Work light *New* Coolant system *New* Dueln U N Tsvkv Iyerot Complete documentation NOT – Off Various tension wrenches Electric feed protection *New* Drill chuck *Optional* Revolving tip *Optional* Lead and pull spindle cover *Optional* Collet device 173E *Optional* Collet set 173E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Year of construction: 2000, Condition: good (used), Set of soft and hard jaws for 3-jaw power chuck RÖHM 630 mm. Djln Ujwd Tl Ie N Treut

Condition: used, Year of construction: 2014, turning diameter max. 356 mm turning length 705 mm control 730 UM Celos greates pass round over bed 920 mm Swing dia. over traverse guideway 740 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Tipp feed 0 - 5.000 mm/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm Duolnowd Txnj U N Trst Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 49 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only 13.000 hours of processing time - incl. 4x driven tools - incl. 6x standard holders

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1460 Measurements depth 2220 Measurements height 1700 Machine weight 3100 Main Drive Spindle speed range 6000 Spindle motor power 7.5/5.5 kW Number of axis 7 Movement X-Axis Movement 140 mm Y-Axis Movement 70 (+/-35) mm Z-Axis Movement 235 mm Tools Number of station 8 Media Chip conveyor Yes Dolnjwgp Uds U N Trout Additional Equipment Bar Loader: IEMCA BOSS 545 E This 7-axis Miyano BNA-42DHY turn-mill centre was manufactured in 2011. It features a main spindle with a maximum bar diameter of 42 mm and speeds up to 6000 rpm, complemented by a counter-spindle that handles up to 34 mm and 5000 rpm. Equipped with two turrets, upper with 8 positions and lower with 6, it offers versatile machining options. Includes a chips conveyor and an IEMCA BOSS 545 E bar loader. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Functionality: fully functional, Celtic 12 lathe. Original manual available. Machine in original colour. Technical details: Duoln U N Tswh U Aijret Turning diameter over bed: 320 mm Turning length: 800 mm Centre distance: 800 mm Height centre piece: 150 mm Bore of the work spindle: 30 mm Speed range: 35 - 1500 / 16 steps rpm Infeed range x - direction: 0.04 - 2.4 / 30 steps m/min Spindle adjustment rear:: 125 mm Dimensions machine approx. LxWxH: 1.7 x 0.8 x 1.5 m

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, Lead and pull spindle lathe Weiler Intern 160 *Partially overhauled Item number: 04-03-218 Manufacturer: Weiler Delivery time on request Very good general condition Machine partially overhauled Delivery time: subject to prior sale upon request Year of construction: approx. 1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kgDigital display: 3-axis digital display Sino *New* Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter over support: approx. Ø198mm Max. turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed ​​range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2 kW Automatic longitudinal & plan feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm Inch 80 – 2 Gg/” Diametrically - pitch thread 200 - 5 Dp module 0.2 - 4 Tailstock: MK3 Accesories: 3-axis digital display SINO *New* 3-jaw chuck 160mm *New* Dueln Uohd Uubo N Trst Quick-change holder size A + 1 insert Bed stop Work light *New* Coolant system *New* Complete documentation Emergency stop switch Various tension wrenches Machine feet Electric feed protection *New* Guide and pull spindle cover Drill chuck *Optional* Revolving tip *Optional* Collet device 386E *Optional* Collet set 386E *Optional* Additional quick-change holders *Optional* Further accessories on request Price and further technical data on request

Condition: excellent (used), Year of construction: 2007, operating hours: 10,762 h, Functionality: fully functional, CNC TURNING-MILLING CENTER YCM GT-250 MA Item number: 04-02-092 Manufacturer: YCM Very good overall condition Machine workshop tested Delivery time: Immediate - subject to prior sale Year of manufacture: 2007 Dimensions (L x W x H): 3,700 x 2,400 x 2,100 mm Weight: approx. 6000 kg Operating hours: approx. 10,762 Max turning diameter: approx. 270 mm Max turning length: approx. 560 mm Travel X-axis: 230 mm Travel Z-axis: 560 mm Including accessories: Yes Integrated C-axis: Yes Control: Fanuc TXP-200e Number of tool positions: 12 Number of driven tool positions: 12 Number of controlled axes: 2 Spindle bore: 62 mm Tool holder: VDI 40 Dsln U N Tov Hqikorjut Speed range: 20-6000 rpm Total drive power: 15 kW Accessories: 3-jaw chuck Various jaws Tool measuring probe Collet chuck device + collets Various wrenches Various tools Various milling cutters / drills / turning tools Documentation Chip conveyor Tool cabinet Spindle stop Tool holders Further accessories on request Price and additional technical data on request.

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Leit- und Zugspindeldrehmaschine Weiler Matador VS2 - Partially Refurbished Item Number: 04-03-224 Manufacturer: Weiler Condition: Very good general condition Partially refurbished Delivery time: Immediate (subject to prior sale) Specifications Year of Manufacture: Approx. 1987 Dimensions (L x W x H): Approx. 1500 x 1000 x 1700 mm Weight: Approx. 600 kg Digital Display: New 3-axis digital display from Sino Capabilities and Dimensions Maximum turning diameter over bed: Approx. Ø280 mm Maximum turning diameter over support: Approx. Ø160 mm Maximum turning length: Approx. 500 mm Bar capacity: Approx. Ø36 mm Spindle Speed range: Approx. 15–3550 RPM Spindle nose: A 2-5 Drive power: Approx. 3.0 kW Automatic longitudinal and face feeds: Feed range approx. 0.05–0.80 mm/rev Threading capability: Metric: 0.20–12 mm Imperial: 80–2 threads/inch Diametral pitch: 160–6 DP Module: 0.1–4 Tailstock Deln U Neu Tc Ads Treut Quill taper: MK3 Included Accessories New Sino 3-axis digital display New 160 mm 3-jaw chuck Quick-change tool post size A + 1 holder Bed stop New work lamp New cooling system Complete documentation Emergency stop system Various wrenches Machine leveling feet New electrical chuck guard New collet chuck system 386E New collet set 386E Optional Accessories Lead screw and feed rod cover Drill chuck Live center Additional quick-change holders Further accessories available upon request. Price and Additional Technical Details Please contact for price and additional technical specifications.

Condition: new, Year of construction: 2024, Functionality: fully functional, OPTIturn TH 3309D Lead and Feed Screw Lathe Manufacturer: Optimum Model: OPTIturn TH 3309D Year of Manufacture: 2024 Condition: New machine Delivery Time: Available immediately (subject to prior sale) Dimensions and Weight Length: approx. 1685 mm Width/Depth: approx. 745 mm Height: approx. 1590 mm Net Weight: 512 kg Working Areas Center Height: 165 mm Distance Between Centers: 830 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 208 mm Turning Length in Bed Bridge: 430 mm Speed Range Number of Speed Ranges: 16 Speed Range: 70 – 2000 min⁻¹ Electrical Specifications Motor Power: 1.5 kW Connection Voltage: 400 V Frequency: 50 Hz Spindle Spindle Mount: Camlock DIN ISO 702-2 No. 4 Spindle Bore/Rod Passage Diameter: 38 mm Max. Tool Holder Height: 16 mm Dujln U Nevu Aryo Trst Spindle Taper: MT 5 Tailstock Tailstock Taper: MT 3 Tailstock Quill Travel: 110 mm Tailstock Quill Diameter: 32 mm Thread Cutting Metric Thread Pitch Range: 0.4 – 7 mm/rev (26 pitches) Imperial Thread Pitch Range: 56 – 4 TPI (34 pitches) Travel Top Slide Travel: 98 mm Cross Slide Travel: 164 mm Carriage Travel: 695 mm Feed Rates Longitudinal Feed Rate: 0.052 – 1.392 mm/rev (32 feed rates) Cross Feed Rate: 0.014 – 0.38 mm/rev (32 feed rates) Included Accessories Steady Rest (Ø 6 - Ø 50 mm) Follow Rest (Ø 8 - Ø 30 mm) LED Machine Light Reducing Sleeve MT 5 / MT 3 Two Fixed Center Points MT 3 Four-Position Tool Holder (16 mm) Change Gear Set Machine Base Initial Filling with High-Quality Oil Operating Tools Additional Accessories Further accessories available on request. Price and additional technical data available upon request.

Condition: good (used), Year of construction: 1990, Functionality: fully functional, CNC Lathe YCM TC-2 Item number: 04-02-090 Manufacturer: YCM Good overall condition Workshop-tested machine Delivery time: Immediately – subject to prior sale Year of manufacture: approx. 1990 Dimensions (L x W x H): approx. 2400 x 1400 x 2100 mm Weight: approx. 3600 kg Control: Fanuc O-T Technical specifications: Swing over bed: approx. 480 mm Swing over cross slide: approx. 310 mm Spindle bore: approx. 52 mm Max. machining diameter: approx. 250 mm Distance between centers: approx. 550 mm Spindle speed range: approx. 110–3500 rpm Feed rate X-axis: approx. 10 m/min Feed rate Z-axis: approx. 15 m/min Turret: 8 stations Accessories: 3-jaw chuck Duoln U Nowfw Suo Trot Various tool holders Chip conveyor Machine leveling feet Documentation Live center Various chuck jaws Further accessories available on request. Price and additional technical details available upon request.