Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Debvnkedbgxcj Thsut Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: excellent (used), Year of construction: 1999, Max diameter 165mm, max turning length 200mm, 50-5,000Rpm, Spindle bore 51mm, Sub spindle 50-5,000Rpm, Turret 2 x 12 pos, driven tool 50-3,600 Rpm, X 185mm, Z 265mm, Y +/-40mm, X2 195mm, Z2 780mm, Fanuc 16 TT, weight 5,500kg. FMB Bar feeder 3m. Duebvnk Towhvwujhot

Condition: like new (used), Weiler center lathe model Condor 81 lead and feed spindle lathe with 3-axis digital display from Heidenhain ND780 Geometrically overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 86-498 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 Djbveq Tpahonk Thjut >> Feed rates from 0.015 to 0.46 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 Kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 Reconditioned >> Quick-clamping device, collets as good as new from 2 to 30 mm, 1 mm increasing >> Three-jaw chuck Röhm 200 mm with 2 sets of jaws As good as new >> Mulifix size E with 4 steel holders NEW >> Bed stop >> Electric chuck protection >> Machine lamp LED New >> Rear wall >> Operating instructions >> Coolant system >> Machine feet About the machine: Offered is a Weiler Condor 81 guide and feed spindle lathe in a geometrically reconditioned condition, absolutely as good as new. The guides have been reground or re-scraped. With acceptance according to test report. 6 month guarantee. A very nice machine with electronic spindle protection. The accessories collet, chuck, multifix are new or as good as new. Spindles, spindle nuts, bearings, belts, scrapers have been replaced. Take the opportunity to view this machine on site under power and see for yourself its condition. A protective cover for the guide and feed spindle can be fitted for an additional charge.

Condition: ready for operation (used), Year of construction: 2006, Available immediately from location: CNC lathe Doosan Type Lynx 220 A Year of manufacture 2006 Maximum turning diameter 290 mm Turning length 332 mm Dobvnkswhkzns Thjut X-axis 145 mm Z-axis 332 mm Spindle bore 45 mm Spindle speeds up to 6000 rpm Spindle drive 15 kW 24-station tool turret Fanuc CNC control Chip conveyor Weight 3 tons Price: €9,500 plus VAT, ex location

Condition: repair required (used), - Maximum turning diameter over bed: 460 mm - Distance between centers: 1500 mm - Weight: approx. 2000 kg Dujbvnjwifcpsk Thjt - Digital display - Some gear stages are damaged/in need of repair

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Dujbvjvzhbgsnk Thst Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm

Condition: used, TECHNICAL DETAILS - Bar diameter : 10 - 80 [mm] - Bar length : 3700 [mm] - Adjustable bar feed speed : 980 [mm/sec] - Max. scrap length : 110 [mm] - Loading time : 32 [sec] - Max. bar weight : 180 [kg] - Oil filling : 115 [l] POWER SUPPLY - Supply voltage : 230 / 400 [V] - Total installed power : 3 [kW] Debvjwh Uwmenk Thout WEIGHT & DIMENSIONS - Machine floor space : 4792 x 1570 [mm] - Machine height : 2000 [mm] - Machine weight : 1880 [kg] EQUIPMENT - UP Magazine

Condition: excellent (used), Year of construction: 1999, Swing 560mm, max turning diameter 400mm, turning lenght 1.000mm, 50-3,500Rpm, Spindle bore 65mm, 12 pos turret, driven tools 50-3,600Rpm, X 220mm, Z 1,035mm, Y +/- 46mm, Fanuc 18iT, weight ca 6.000kg Duobowhvwbevnk Thot

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Weiler center lathe model Condor 81 Lead and feed spindle lathe with 3-axis digital readout Heidenhain Technical data: >> Year of construction 1988 Machine no. 88-955 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Debvnjtlu Scsk Thjut Accessories and equipment: >> 3-axis digital readout Heidenhain >> 1 piece three-jaw chuck new with 2 sets of jaws >> Collet chuck device collets from 3 to 30 mm 40 collets partly double >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating center point For safety: >> Cover for lead and feed spindle >> 2 emergency stops >> Spindle brake To the machine : We are offering a used Weiler Condor 81 lathe built in 1988 in very good condition. The machine is of course fully functional. The lead and feed spindles are covered for safety. A very robust and powerful machine. The 3-axis digital readout from Heidenhain makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This new generation of Weiler lathes is very user-friendly. Take the opportunity to view and try out this machine under power on site.

Year of construction: 2004, Condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 3000 mm Measurements height 2000 mm Machine weight 3000 kg Dusbvnk Tswanpmehet Control Unit Brand FAGOR Model 8055 FL Main Drive Spindle speed range 4500 Spindle bore 65 mm Workpiece Workpiece drm over bed 475 mm Additional Equipment Filtermist Unit 3-jaw chuck This MICROCUT Challenger BNC-1840 was manufactured in 2004. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this MICROCUT Challenger BNC-1840 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning length: 270 mm, turning diameter: 200 mm, spindle speed (max.): 6,000 rpm, spindle bore: 42 mm, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, bar passage: 42 mm, total height: 1,775 mm, total length: 1,488 mm, chuck outer diameter: 210 mm, spindle nose: ASA 5, CNC Fanuc 0i - TF Distance between centers: mm 270 Max rotating diameter: mm 570 Max turning diameter: mm 200 Bar passage: mm 42 X-axis stroke: mm 50 + 100 Z-axis stroke: mm 250 Rapid X-Z feeds: m/min 30 - 30 Required power: kW 23.8 Length: mm 1.488 Width: mm 2.108 Height: mm 1.775 Weight: kg 2.800 Year of construction: 2018 Machine configuration: • Serial, Ethernet and USB outputs • Belt spindle, 6000 rpm, 5.5 – 7.5 – 11 kW. ASA A2-5 • Hydraulic self-centering chuck – Strong 6’’ 4 jaws diam. 210 mm • Without tailstock • Chip conveyor with rear exit • Manual presetting Renishaw M. T. P. • Grundfos SPK2-3 pump (1.5 BAR) • Linear guides with recirculating rollers • Tool box with service keys • Options required for automation (automatic door, air blow on spindle, air accumulator, I/0 interface 16/16 points) • Gantry robot system model G03zL5: o 3 axes + C-axis, 90/90/15 m/min o GB03 double-jaw gripper – 3 kg/D120 mm, 2 kg/D150mm o GB02 double-jaw gripper – 2 kg/D40xL300 mm o Workpiece storage station WF-A120/16 stations (D20-120mm,30 kg/pallet) Duobvewim H Nsnk Thot o Turn-over station for TS-03 flanges (3kg/D120mm,2kg/D150mm)

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant Dujbvnkjq N Ay As Thot New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), Year of construction: 1983, Functionality: fully functional, Center lathe, Gebr. Boehringer, model DUE 500, built in 1983, 1 digital readout, Heidenhain Very good condition and can be tested under power. Tools and accessories are included. Duebvnev Ayakok Thet Price reduced.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Used FEELER Model FTC30 2 axis CNC lathe with Fanuc 0iT-C control Serial number TE418, year of manufacture 2007. Dsbvnk Towa Tzzehout MACHINE CONSTRUCTION & FEATURES  RIGID CAST IRON CONSTRUCTION.  LINEAR SLIDE WAYS.  HANDWEEL  PARTS CATCHER.  12 STATION RIGID SERVO TURRET.  MANUAL TAILSTOCK WITH PROGRAMMABLE QUILL.  SWARF CONVEYOR AND BIN  SET OF VDI-40 TOOL HOLDERS  TOOL SETTING ARM MACHINE CAPACITIES Swing Over Bed Ø 580MM Swing Over Saddle Ø 450 MM Maximum Turning Diameter Ø 450 MM Maximum Turning Length 670 MM Bar Capacity Ø 75 MM AXIS TRAVELS X-Axis 250 MM Z-Axis 670 MM SPINDLE Chuck Size, 3 jaw hydraulic 10” Spindle Bore Ø 86 MM Spindle Speed (RPM) 35-3,500 RPM Spindle Nose A2-8 TURRET VDI Turret Number of Tools 12 FEEDRATES Rapid Speed X 20 M / MIN Rapid Speed Z 20 M / MIN Slide Type LINEAR GUIDEWAYS MOTORS Spindle Drive (Max/Cont.) 18.5 / 22.0 KW X-Axis Servo Motor 2.1 KW Z-Axis Servo Motor 2.1 KW Hydraulic Motor 2.25 KW Coolant Pump Motor 0.86 KW TAILSTOCK Taper MT 4 Quill Diameter Ø 100 MM Quill Travel 100 MM Travel of Tailstock 385 MM Type MANUAL WITH HYDRAULIC TAILSTOCK QUILL POWER SUPPLY Electric Power Supply 30 KVA Voltage 415V / 50HZ / 3PH MACHINE SIZE & WEIGHT Length (Without Chip Conveyor) 2920 MM Width 1,685 MM Height 1,800 MM Weight 5,080 KGS

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, turning length: 1,524 mm, turning diameter over cross slide: 760 mm, turning diameter: 760 mm, spindle motor power: 40,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,300 rpm, spindle bore: 112 mm, Mazak Intergrex 400-III x 1500 Mazatrol 640MT Pro Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Djbvswf Nl Hsnk Thjut Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 35-3300Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW CAPTO C6 Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14000kg

Year of construction: 2022, Condition: ready for operation (used), Additional Equipment 4-color lamp /Automatic door /Robot interface /Bar feeder interface /10 M codes Dobvjwgp Rrenk Thjut This DMG MORI NLX 2500SY 700 was manufactured in 2022. A robust horizontal turning machine, it offers reliable performance for your machining needs. Consider the opportunity to buy this DMG MORI NLX 2500SY 700 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2010, Condition: excellent (used), Clamping pressure tester make Prema max.pressure 100 MPa Clamping - diameter 220 mm Duebvnsfd Encok Thot Weight 12 kg

Condition: used, Year of construction: 1998, Functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak Lathe Type INTEGREX 50 Year 1998 No Tailstock Mazatrol T Plus CNC The Machine Is Complete With Chip Conveyor With All Documentation With 3 Tool Cabinets Dusbvsv Iv S Tsnk Thot

Year of construction: 2015, Condition: ready for operation (used), Swing diameter over bed/slide/at the front door: 780mm/630mm/680mm, turning diameter: 406mm, turning length: 760mm, travel X/Z: 260mm/760mm, Y-axis: +/-50mm, speed: 4500rpm, spindle bore: 76mm, tool positions: 24, control: Siemens 828, documentation available. On-site inspection is possible. Duobvnsv Uqcajk Thjt

Condition: used, Year of construction: 2015, operating hours: 148 h, Functionality: fully functional, turning length: 180 mm, turning diameter: 20 mm, spindle motor power: 2,200 W, spindle speed (max.): 10,000 rpm, rotational speed (max.): 6,000 rpm, bar passage: 20 mm, bar diameter: 26 mm, Equipment: rotational speed infinitely variable, Excellent condition CNC lathe featuring advanced technology for precision machining. Specifications: >Control System: Fanuc 32-iB >Year: 2015 >Operating Hours: Only 828 total hours (148 cutting hours ONLY) >Axes: 7-axis functionality >Spindles: Dual spindle, each with C-axis indexing (0.001° precision) >Main Spindle Capacity: Max bar diameter 20mm, max speed 10,000 rpm, power 2.2 kw >Counter Spindle Capacity: Max bar diameter 20mm, max speed 10,000 rpm, power 1.5 kw >Tooling: 4 driven tool positions (6000 rpm max), multiple turning and frontal tool holders >Barfeed: PRO HP326, 3.0mm – 26mm bar capacity Additional Features: >Collet systems for both spindles >Swarf tank, coolant system, pneumatic ejector >Belt-type chip conveyor >Integrated fire safety, electrical/software interface >Capability to switch from steady to sliding headstock operation A highly versatile and productive machine suitable for precision manufacturing. Dusbvnkewffh Ds Thet

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Duebvnk Towc Rvzshet -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Adapter: -Short cone: size 8 (Ø135-139 mm) -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Year of construction: 2022, Condition: ready for operation (used), Additional Equipment 12-station turret with 10000 rpm Hinged chip conveyor/High pressure coolant/ASA 8” spindle with 91 bore/KITAGAWA BR 10 self-centering Debewgp Rljvnk Thsut Air blower/Manual presetting/4-color lamp/Automatic door/Robot interface/Bar feeder interface/10 M codes This DMG MORI NLX 2500Y 700 was manufactured in 2022. A robust horizontal turning machine, ideal for precision machining. Consider the opportunity to buy this DMG MORI NLX 2500Y 700 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Functionality: fully functional, spindle bore: 76 mm, turning diameter: 500 mm, center width: 1,500 mm, For sale is a Colchester Mascot 1600 lathe with a 3-axis Heidenhain digital readout and safety guards. The machine is fully functional, currently in our warehouse, and ready for shipment. Max. turning diameter over bed: 500 mm Max. turning diameter over support: 360 mm Debvnowhzlkok Thsut Center distance: 1500 mm Spindle bore: 76 mm Tailstock quill taper: MT 5 Tailstock quill travel: 230 mm Spindle speeds: 20 - 1600 rpm

Condition: reconditioned (used), Functionality: fully functional, spindle bore: 56 mm, center height: 180 mm, center width: 1,000 mm, Dear Sir or Madam, For sale is a Weiler Commodor B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, meaning it is in excellent technical, geometric, and visual condition. You are welcome to visit us for a closer look. Availability: upon request Center height: 180 mm Center distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Power consumption: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital readout K+C NEW, coolant system, chuck guard, removable chip tray, operating instructions, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field Mechanical Engineering - All machines undergo at least a workshop inspection. - All lubricants and any worn parts are replaced in advance. - Upon request, we can fully or partially overhaul the selected machine. Duebswhzivjvnk Thjt - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: reconditioned (used), Functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Dobowhzdmevnk Thsut Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery