Condition: new, The NOMURA 20J3 including short turning conversion kit, tool presetter, and long part removal, as well as other optional equipment. Fpelqoglkt Djx Saujg

Year of construction: 2018, Condition: ready for operation (used), Main Drive Spindle speed range 60–6000 Spindle motor power 11/15 kW Tool taper A2-5 Media Oil water separator Yes Chip conveyor Yes Additional Equipment Turret with Direct Mount (12 stations) High-Precision Linear Guides on All Axes Coolant System Folewdba Tsqx Sauepg Hydraulic System Full Enclosure Automatic Lubrication System Signal Lamp (3-color) Work Area Lighting Automatic Machine Shutdown (via M-Code) Automatic Chuck Operation This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1996, Functionality: fully functional, spindle bore: 36 mm, center height: 180 mm, turning length: 900 mm, Famot Europa lathe year 1996 with 2-axis Heidenhain digital readout , three-jaw chuck , Multifix. , chuck protection , rotating steady rest. Center height 180mm , center width 1000mm , spindle bore 36mm , speeds 28-2500 revolutions. Weight approx. 1500 KG. Machine in a very good good working condition, ready for demonstration under power by arrangement. Folqxjur R Rue Sauopg

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: W490X1.5, Lathe Make: Löw Type: W490x1.5 Turning diameter above bed: 520 mm. Turning diameter above cross slide: 260 mm. Centre height: 260 mm Fpslqx Sajwg Apzjuog Turning length: 1800 mm Speeds: 11 - 2240 rpm Spindle passage: 65 mm Thread - metric pitch: 0.05 - 112 mm Thread - inch: 1/4 - 56 inch Number of speed steps: 24 Total power requirement: 1.1 kW Machine weight approx.: 2.5 tons Machine dimensions approx.: 3.20 x 1.35 x 1.80 m

Condition: good (used), Year of construction: 2007, - SIEMENS 849 D control unit - Bar capacity 65 mm - Main and counter spindle with speed 5,000 1/min - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Speed of driven tools 4,000 1/min TRAVEL X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Fpolqxouw Izvs Saujg Bar feeder TOP Automazioni XF 375

Condition: like new (used), Year of construction: 2021, operating hours: 2,868 h, Functionality: fully functional, turning length: 5,000 mm, turning diameter over cross slide: 830 mm, turning diameter: 975 mm, spindle bore: 181 mm, travel distance X-axis: 350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 5,090 mm, tool mount: 12 mm, turning diameter over bed slide: 830 mm, SAMSUNG SMEC SL 4500 XLY DRIVEN TOOL LATHE TECHNICAL SPECIFICATIONS Brand: SMEC Model: SL 4500 XLY CNC: Fanuc Oi-TF Year: 2021 Swing over bed: 975 mm Swing over slide: 830 mm Maximum turning: 620 mm Maximum milling: 704 mm Distance between centers: 5000 mm Spindle speed: 12020 rpm Bar passage: 181 mm X: 350 mm Y: 200 mm (+/- 100 mm) Folqewhf Dkjx Sauepg Z: 5090 MM C: 0.001 (360º) 12-position motorized turret (BMT 75) Machine weight: 25,000 kg PRICE AND MORE INFORMATION ON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDING MACHINE, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, BENDING MACHINES)

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, Hwacheon T2 CNC lathe with 2 turrets. Fjlqxewhiqzo Saujpg

Condition: good (used), Good condition Electronic unit Ready for delivery 4000 MM Fpslevnmmusqx Saujg Steady rest

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Travel : 100 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 7.5/5.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 34 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 5.5/3.7 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - X stroke : 140 [mm] - Z stroke : 235 [mm] - Y stroke : 70 (+/-35) [mm] - Live tools speed : 5000 [rpm] - Live tools power : 1.0 [kW] Folqouhaflsx Sauepg LOWER TURRET - Number of positions : 6 - X/Z stroke : 140 / 310 [mm] POWER SUPPLY - Total installed power : 30 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.220 x 1.460 [mm] - Machine height : 1.700 [mm] - Machine weight : 3100 [kg] MACHINE HOURS - Number of working hours : 14540 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Bar loader : Top Automation FU342SX (2021) - Electric transformer

Year of construction: 1998, Condition: ready for operation (used), General Data Measurements width 4200 mm Measurements depth 2380 mm Measurements height 2200 mm Machine weight 6750 kg Control Unit Brand FANUC Model Series 18i-T Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle bore 80 mm Tool taper 6 ASA Number of axis 4 Fpjlqx Sswdzchsaueg Turret Number of turrets 2 Tools Number of index 12 Additional Equipment Bar feeder: Yes This 4-axis Biglia B56 S2M was manufactured in 1998. A robust horizontal turning machine featuring a FANUC Series 18i-T control, spindle bore of 80 mm, and a turning speed of 4000 rpm. It includes a bar feeder IEMCA Kid 80, enhancing productivity. If you are looking to get high-quality turning capabilities consider the Biglia B56 S2M machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2014, operating hours: 17,300 h, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, spindle bore: 26 mm, TECHNICAL DETAILS Control: Mitsubishi Main and counter spindle diameter: 20 mm Spindle bore: 26 mm Fslqx Sjwhmrceauepg Maximum machining length for long turning: 200 mm Maximum machining length for short turning: 50 mm Main spindle speed: 10,000 rpm Counter spindle speed: 8,000 rpm Rear side machining Rear block: with Y-axis Stations for rear side machining: 8 units Deep hole drilling stations on counter spindle: 6 units MACHINE DETAILS Operating hours: approx. 17,300 h Bar loading magazine: FMB Turbo 2-20 EQUIPMENT - Conversion kit D20 - Müller CL3 high pressure system with 8-way switchable valves, 130 bar, and automatic backwash filter - Automatic fire extinguishing system Kraft + Bauer included Fire damper - Angle-adjustable driven holder 3-way

Condition: ready for operation (used), Colchester Mascot 1600 Lathe Turning length: 1500 mm Turning diameter over bed: 432 mm Turning diameter over cross slide: 267 mm Felqx Sowhbwyeauspg Spindle bore: 76 mm Speeds: 20 - 1600 rpm Tailstock quill: MT5 Dimensions (approx.): Length 3000 mm, width 1050 mm, height 1300 mm Weight: approx. 2200 kg Drive power: 9.3 kW Description has been accepted. The machine is being sold on behalf of a customer. Item location: 75242 Neuhausen-Hamberg You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. A net invoice can also be issued for international customers. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: new, turning length: 2,070 mm, turning diameter: 600 mm, spindle speed (max.): 1,500 rpm, spindle motor power: 18 W, total height: 1,950 mm, Equipment: rotational speed infinitely variable, The HYUNDAI Wia L5100LY has excellent rigidity through the use of a wedge-shaped Y-axis. Specialized in heavy machining through the use of a main spindle with 2-stage gear (max. torque 2,990 N·m) High rigidity through flat guides and a turning length of 2,070 mm. Powerful large BMT 75 turret. Fpolqxsvwizgj Saueg

Condition: excellent (used), Year of construction: 2019, operating hours: 10,757 h, machine/vehicle number: 3116491, Machine is in good condition, still working if there is inquire. All the time servised by authorised servise of HAAS. We are selling it as of lack of inquires. Fpslqxjv Sqzdj Saueg

Condition: used, Year of construction: 1975, - 3-jaw lathe chuck Ø 400 mm - 4-jaw faceplate Ø 600 mm - Grinding attachment Ø 200 mm - Multifix - Change gears - Operating instructions & documentation - Year of manufacture 1975 Working area: - Center height: 300 mm - Swing over bed: 620 mm - Swing in the gap: 800 mm - Swing over the cross slide: 360 mm - Length of gap: 407 mm - Distance between centers: 1000 mm - Max. workpiece weight between centers (without steady rest): 1800 kg Main spindle: - Spindle head: 8 DIN 55022 - Spindle bore: 83 mm - Internal taper: Metric 90 - Center punch: MK5 Tailstock: - Quill stroke: 180 mm - Quill diameter: 85 mm - Quill inner taper: MK5 Clamping fixtures: - Faceplate diameter: 600 mm - Max. chuck diameter: 410 mm Main spindle speeds: - Number of steps: 18 - Range: 14 - 1000 rpm Feed rates: - Lengthwise feed: 0.086 - 4.866 mm/rev (66) - Cross feed: 0.040 - 2.258 mm/rev (66) - Cross slide travel: 375 mm - Top support travel: 210 mm Thread pitches: - Metric threads: 0.5 - 28 mm (66) - Inch threads: 1 - 56 dpi (66) - Modular threads: 0.25 - 14 mm (66) - Diametrical pitch thread: 2 - 112 dpi (66) Installation: - Motor power: 15 kW - Operating voltage: 400 V - Dimensions W x H x D: approx. 2950 x 1400 x 1400 mm - Weight: approx. 3100 kg Folqxewdxmqe Saujpg

Condition: good (used), Year of construction: 1960, - Year of manufacture: 1960 - Condition: Used, in very good condition considering its age, fully functional - Dimensions: 2,730 x 1,100 x 1,350 mm (L x W x H) - Max. turning diameter: 630 mm - Max. turning length: approx. 900 mm Felqxjwc Unns Sauspg Emergency stop, key switch, and chuck cover retrofitted, electrical system partially replaced. Accessories: Steady rest, tailstock holder, 4-jaw chuck, soft jaws, centers, small jaw chuck, turning tools (all aligned to center height, as no Multifix is installed), machine feet. Top slide with Multifix can be retrofitted. Machine weight: approx. 3.2 t

Condition: good (used), Year of construction: 2017, Functionality: fully functional, Turning diameter above bed ----- 210 mm Turning diameter above cross support ----- 110 mm Center height ----- 105 mm Center distance ----- 400 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Chisel support travel ----- 55 mm Main spindle throughput ----- 21 mm Main spindle mounting ----- MK3 Spindle speed range ----- variable 50 - 2500 rpm Thread cutting inch ----- 8 - 44 TPI Thread cutting metric ----- 0.5 - 3 mm Spindle travel ----- 60 mm Spindle diameter ----- 30 mm Felqewgxq Iex Sauopg Spindle mounting ----- MK2 Motor power ----- 600 Watt Weight ----- 75 kg STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool holder * Drip plate * Rear wall * Claw plate guard * Lead spindle guard * Tool support guard * Set of change gears * Digital speed display * Fixed centers * Left / Right switching * Tools in box * MOUNTED BASE CUPBOARD

Condition: used, fixed heavy duty steady rest Center height 1040 mm Inner diameter 480 mm Weight 700 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Fpeljdbbuioqx Saujg D - 44143 Dortmund - Wambel

Condition: excellent (used), Pull down jaws (28370) Make Hilma type BZT 160 3722-04 Fpolqxjlrp N Hs Sausg well suited for bright drawn material weight 3,5 kg

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET Fslqx Saewcdytjuopg 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Two machines are available

Condition: reconditioned (used), Year of construction: 1990, operating hours: 62,673 h, Referencia: LT-2322 Fabricante: Okuma Modelo: LR15-2ST Control: Okuma OSP5020L Año de fabricación: 1.990 Idioma Teclados / Software: Inglés / Español Tiempo de conexión: 62.673 horas Tiempo de giro husillo: 21.417 horas Tiempo de mecanizado: 16.851 horas País de origen: Japón Características Técnicas: Capacidad: Fpelsqffxisqx Saujg Volteo sobre bancada: Ø 450 mm Volteo sobre los carros: Ø 250 mm Distancia entre puntos: ----- Diámetro máximo de torneado: Ø 240 mm Capacidad máxima de barra: ----- Husillo principal: Diámetro del husillo: Ø 100 mm Nariz del husillo (tipo): JIS A2-6 Diámetro interior del husillo: Ø 62 mm Gamas de velocidad: 2 gamas, infinitamente variable Velocidad del husillo: 75 – 4.200 rpm Motor: 15/22 kW (Cont./20 min, VAC) Eje Z: Carrera (ZA): 520 mm Carrera (ZB): 520 mm Avance de corte: 0,001 – 1.000,00 mm/rev Avance rápido: 15.000 mm/min Eje X: Carrera (XA): 195 [125 + 70] mm Carrera (XB): 125 [80 + 45] mm Avance de corte: 0,001 – 1.000,00 mm/rev Avance rápido: 12.000 mm/min Características Técnicas (continuación): Torreta A: Tipo: V10 Número de herramientas: 10 Torreta B: Tipo: V8 Número de herramientas: 8 Dimensiones y pesos: Altura de la máquina: 1.700 mm Superficie de suelo ocupada: 3.145 x 1.800 mm Peso de la máquina: 4.900 kg Opciones incluidas: Plato de 3 garras AUTO STRONG N-208 (Ø 200 mm), con Cilindro hidráulico ciego Programación asistida (IGF) 2 sensores de medición de herramientas (Touch Setter) Transportador de viruta COMETEL SYSTEM Extractor de neblinas LNS FOX WS1000

Condition: used, Year of construction: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest - rotating center point MK5 - Mulifix B quick-change holder incl. 10 tool holders - Switch-on time 32582 h - Year of manufacture 1997 - incl. operating instructions and technical documentation Fpelqx Ssr Hrq Doauog Technical data: Working range: - Tip width: 1000 mm - Center height: 280 mm - Circumferential diameter over bed: 570 mm - Circumferential diameter over facing slide: 340 mm - Bed width: 350 mm - Movement of the facing slide: 340 mm - Movement of the top support: 140 mm - Slide gate length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning tool cross-section (height/width): 32 x 25 mm Turning spindle: - Spindle head according to DIN 55027: size 8 - Spindle diameter in front bearing: 100 mm - Spindle bore: 66 mm - Inner taper of the main spindle: metr. 70 Main drive: - Drive power 60% / 100% ED: 15 / 11 kW - Max. Torque at the turning spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Speed range gear stage I: 1 - 625 rpm - Speed range gear stage II: 4 - 2500 rpm Feed drive: - Type: Three-phase servo drives - Feed range longitudinal and planar: 0 - 10 mm/rev - Feed force longitudinal: 9000 N - Feed force planar: 7000 N - Input speed longitudinal/plane: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Inner taper of the quill: MK5 Thread cutting range: - Metric threads: 0.1 - 250 mm - Inch thread: 1/4 - 56 G/1" - Module thread: 0.125 - 28 - DP thread: 1 - 224 Machine dimensions: - Dimensions WxHxD: 2850 x 1750 x 1815 mm - Weight of the machine: 2950 kg

Condition: used, fixed heavy duty steady rest Centre height 1080 mm diameter 250 - 600 mm Weight 1800 kg Fpeledbbuysqx Saujg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: refurbished (used), Year of construction: 2014, Functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Fpjlou U E Avjqx Sausg Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: used, fixed heavy duty steady rest without top! Center height 1040 mm Inner diameter 610 mm Weight 600 kg Fpslqsdbburjx Sauog Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel