Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Universal Lathe - cycle controled / Brand: WEILER / Type: E35 D Year of construction: 2002 (Start-up: November 2002) Operating hours (total switch-on hours): 53.083 h Spindle hours: approx. 18.000 h Condition: The machine was used in a test laboratory, never used in production (no heavy machining). The machine can be inspected by appointment. TECHNICAL DATA: - Control: Siemens 810D, Weiler D2 (cycle control) Working area: - Center height: 200 mm - Center distance: 950 mm - Turning length max.: 950 mm - Swing diameter over bed max.: 410 mm - Swing over cross slide max.: 200 mm - Swing diameter in the crank: 440 mm - Length of crank in front of faceplate: 200 mm - Workpiece weight max.: 900 kg Working spindle: - Spindle head according to DIN: 55027 Delqswctmis Iq Dyokl - Size: 6, Inner cone: MK 6 - Spindle diameter in the front bearing: 90 mm - Spindle bore: 54 mm - Diameter of the faceplate: 355 mm - Chuck diameter max.: 250 mm - Torque max.: 700 Nm Support: - Tool system: Parat - Chisel cross section: 25 x 25 mm - Number of bed slides: 1 - Number of cross slides: 1 - Lengthwise stroke: 950 mm - Flat stroke: 230 mm Tailstock: - Quill cone: MK 4 - Quill diameter: 65 mm - Hydraulic quill stroke max.: 120 mm - Manual tailstock displacement max.: 950 mm Feed rate: - Longitudinal slide min/max: 0,001 - 20 mm/U - Cross slide min/max: 0,001 - 20 mm/U - Rapid traverse: longitudinal 10 m/min, plan 5 m/min - Feed force: longitudinal/transverse 8.000/5.000 N Thread pitches min / max: - Metric 0,1 / 250 Pitch in mm Withworth 1/4 / 56 Gears/Inch Module 0,125 / 28 Slope in module Spindle speed: - Gear stage I: 1 up to 750 rpm II: 4 up to 3.000 rpm - Continuously: 1 up to 3.000 rpm Max. performance achieved with I/II: 150 rpm (100% ED)/ 600 rpm (100% ED) Machining values for 60 pcs.: - Chip cross section: 1,4 mm², at cutting speed 120 m/min Fuel type: - Normal coolant: 30 dm³/min, 0,4 bar - Coolant reinforced: 30 dm³/min, 3,5 bar - Machine weight: 2,1 tons - Total connection value: 10 kW - Total power requirement: 12 kVA - Operating voltage: 400 V, frequency: 50 Hz Machine dimensions: - Length/Width/Height: 2,3 x 1,4 x 1,7 m ACCESSORIES/EQUIPMENT: - Various accessories - 1 pc. Machine tray - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: good (used), Weiler Condor VS 2 center lathe and feed spindle lathe Technical data: Dkelqeu E H Iwj Iq Dyjl Center height 160 mm Center width 800 mm Spindle bore 40 mm Bed width 240 mm Speeds 12 - 2800 min-1 Drive power 3 kW Tailstock holder MK 3 Quill stroke 110 mm Feed rates 0.037 - 1.253 mm/rev Weight, approx. 800 kg Dimensions (WxDxH), approx. 1930 x 880 x 1470 mm Equipment: 3-jaw lathe chuck Quick-change holder system Multifix size A incl. 1 change holder Electrically locked chuck guard Brake motor retrofitted Bed stop Emergency stop button Coolant device Machine light Chip back panel ELESTA 3-axis digital display Moving tip The machine has been technically inspected and is in very good condition. Backlash face spindle 0.2mm Top slide backlash 0.15mm Inspection under power possible at any time. Price net free loading ex warehouse

Condition: ready for operation (used), Year of construction: 2020, Control Unit Model SINUMERIK 828D Brand SIEMENS Main Drive Number of spindles 1 Spindle speed range 4500 Djlq Iq Dowg Iiaeyskl Movement X-Axis Movement 205 MM X-Axis Working Feed 30 M/MIN Z-Axis Movement 560 MM Z-Axis Working Feed 36 M/MIN Media Chip conveyor Yes This 3-axis Doosan Lynx 2100LMB lathe was manufactured in 2020. It features a SIEMENS SINUMERIK 828D control, a spindle speed of 4500 rpm, and a max turning diameter of 300 mm. The machine offers a max turning length of 510 mm and includes driven tools and a chip conveyor. The Doosan Lynx 2100LMB machine we have for sale is a reliable choice for efficient and precise metalworking. Reach out for more information about this lathe. Application Types Turning

Year of construction: 1995, Condition: excellent (used), Numerical control lathe SOMAB MOD. OPTIMAB 400 Year of construction 1995 "CE". Used in excellent conditions. Turning length 1000 mm. Turning diameter on guides mm 400. Turning diameter above the slide mm 220. CNC NUM Mod.Somab PL+S3. Spindle hole: mm 43. Spindle speed : Rpm 80 - 4500 Motorized turret : nr. 12 positions. Weight : Kg 6000 Installed power : Kw 25 Machine dimensions (without chip conveyor): mm 2750 x 1805 x 2085. Dkolq Iq Dohuapgoyjl Chips evacuation device supplied. Turret tools supplied.

Condition: ready for operation (used), Year of construction: 1998, turning length: 650 mm, turning diameter: 300 mm, spindle speed (max.): 1,500 rpm, Heidenhain 2-axis display Capacity 650 x 300 mm, spindle bore 33 mm Collet clamping with collet set Chuck with jaw sets Centers Dolq Iqswga Hqj Dyskl

Condition: good (used), Functionality: fully functional, turning diameter over bed slide: 500 mm, Lathe SNA 500/1500 Dkolq Iq Dewhgndeyel

Condition: used, Year of construction: 1997, Turning length 1500 mm Max. swing 540 mm Max. turning diameter 450 mm Maz. spindle speeds 3500 rpm Dkslop Ui N Rjq Iq Dyjl Max. spindle speeds on live tools 1500 rpm Spindle bore 78 mm Turret w/12 stations Tailstock Control Mazatrol T-Plus Equipped with: 2 rotating tools 2 external cutting tools

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Controller LUXTRONIC (ISO programming) Delq Iq Djwfgmhjyokl Z travel 400 mm Max turning dia 210 mm Spindle power 1,1 kW Spindle bore d26 mm Spindle speed range 25 - 2000 rpm No of turret positions 8 Full power required 1,5 kW Dimensions L x W x H = 1700 x 700 x 1500 mm Weight 500 kgs Accessories - G codes: G01, G02/G03, G04, G33, G40/G43, G74, G81/G82, G84, G85, G86, G90, G91, G92, G94/G95, G96 - 3 jaws chuck D120 mm - Collet chuck with spare collets - Automatic turret - Low voltage working light - Tool holders (also for drills) - Manual in PDF (on german language) The lathe can be found in our showroom and is under power. It can be inspected after making an appointment.

Condition: ready for operation (used), Year of construction: 2020, Control Unit Model SINUMERIK 828D Brand SIEMENS Main Drive Number of spindles 2 Spindle speed range 6000 Djlq Iq Dswg Iigsyekl Movement X-Axis Movement 205 mm X-Axis Working Feed 30 m/min Y-Axis Movement 105 mm Y-Axis Working Feed 10 m/min Z-Axis Movement 560 mm Z-Axis Working Feed 36 m/min Turret Number of turrets 1 Media Chip conveyor Yes Additional Equipment OD and face tool holder of main spindle// Double OD and face tool holder of main and sub spindle ID tool holder of main spindle// Double ID tool holder of sub spindle Triple ID tool holder U-Drill cap of Main and sub spindle Straight (short) milling tool unit Anglular an Anglular (offset) milling tool unit Boring tool sleeves of main and sub spindle// U-drill sleeves Milling adapters SERVO 24ST turret (mechanism/station) BMT-45P 20/32 mm Holder mounting type tool size (turning/boring) This 5-axis DOOSAN Lynx 2100LSYA lathe was manufactured in 2020. Featuring a SIEMENS SINUMERIK 828D control, it offers spindle speeds up to 6000 rpm and includes a sub-spindle for versatile operations. With a max turning diameter of 300 mm and length of 510 mm, it also has driven tools and rapid traverse rates up to 36 m/min. Consider this Doosan Lynx 2100LSYA lathe, ideal for advanced turning tasks. For more information, please reach out to us. Application Types Turning

Condition: excellent (used), BREDA BRF 150 X 800 mm Parallel Lathe Machine from school closure. Very good condition, ready to 'use. Height of centers: 150 mm Distance between centers: 800 mm Turning diameter on the carriage: 185 mm Self-centering chuck with 3 jaws : Diam. 160 mm Rotational speed: 47 - 1440 Rpm Bar passage: 42 mm Tool turret included Bench width: 260 mm Tailstock attachment: C.M.3 Bezels supplied Dkolq Iqsif Rrzs Dyjl 4-jaw plateau supplied Tailstock supplied

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,290 h, Functionality: fully functional, machine/vehicle number: S2AW3901, turning length: 320 mm, turning diameter over cross slide: 325 mm, turning diameter: 114 mm, spindle motor power: 6,500 W, spindle speed (min.): 1 rpm, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 320 mm, tool mount: 16 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, rotational speed (min.): 1 rpm, type of input current: three-phase, bar passage: 25 mm, swing diameter over bed slide: 325 mm, overall weight: 2,100 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO MAXXTURN 25 SMY(2008) with FMB turbo 2-20/ 3200 "A" bar loader(2010) With Y-axis, sub spindle, part ejector and parts catcher for complete automatic production of complex small turned and milled parts. Control: Siemens sinumerik 810D powerline with shopturn conversational programing. Extremely easy to set up and program. Work area Swing over bed Ø 325 mm Swing over cross slide Ø 150 mm Main spindle / counter spindle distance 485 mm Maximum turning diameter Ø 114 mm Maximum part length 315 mm Maximum bar diameter Ø 25,4 mm Travel Travel in X 100 mm Travel in Z 320 mm Travel in Y +20 / –15 mm Travel in in Z2 350 mm Main spindle Speed range 0 – 8000 rpm Torque at spindle 30 Nm Spindle nose Ø 70 h5 Spindle bearing Ø 60 mm Spindle bore hole Ø 33 mm Counter spindle Speed range 0 – 8000 rpm Torque at spindle 20 Nm Spindle nose Ø 70 h5 Spindle bearing Ø 45 mm C-axis Resolution 0,001° Rapid motion speed (Siemens) 1000 rpm Spindle indexing 0,01° Drive power Main spindle 6,5 kW Counter spindle 3,5 kW Tool turret Number of tool positions 12 Number of indexing positions 36 VDI shaft (DIN 69880) VDI16 Tool cross-section for square tools 12 x 12 mm Shaft diameter for boring bars 16 mm Turret indexing time 0,2 sec Dkolqewh T Tas Iq Dysl Driven tools Speed range 0 – 6000 rpm Maximum torque 4 Nm Maximum drive power 1,2 kW Number of driven tools 6 Feed drives Rapid motion speed X / Y / Z 20 / 10 / 30 m/min Feed force in the X / Y / Z axis 3000 / 4000 / 4000 N Positioning spread according to VDI 3441 in X / Y / Z 3,5 / 3 / 4 µm Coolant system Tank volume 140 liters Standard pump power 0,57 (2,2) kW Pump capacity at 3,5 bar / 1 bar 15 / 65 l/min Power consumption Connected load 12 kVA Compressed air 6 bar Dimensions and weight Height of spindle center above floor 1140 mm Total machine height 1870 mm Foot print (without chip conveyor) LxD 2180 x 1425 mm Total weight 2100kg Machine is in great condition, holding micron tolerances all day and comes fully equipped with tooling and clamping units. Additional equipment: Röhm Collet chuck 148E with set of collets on main and sub spindle. Additional collet chuck 5C with full set of collets for sub spindle. 2 coolant pumps with trough spindle coolant on sub spindle. All the tooling, inserts, holders, collets and measuring equipment in the pictures are included with the machine! 3 sets of sleeves for FMB turbo 2-20 bar feeder. All machine documentation is present. Machine was serviced by certified EMCO technicians. Machine is under power and in production until sold. Can be checked and tested with prior arrangements.

Condition: used, Year of construction: 2018, operating hours: 27,200 h, Functionality: fully functional, turning length: 10,000 mm, turning diameter: 235 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,155 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (min.): 25 rpm, rotational speed (max.): 4,500 rpm, tool mount: 25 mm, Equipment: documentation/manual, Použite rok 2018 Delq Iq Devrzuzsyokl

Condition: used, Year of construction: 2000, Turning length 1000 mm Max. swing 640 mm dia. Delq Iq Dop Ui N Hsyjkl Max. turning 540 mm dia. Spindle bore 51 mm Max. Spindle speeds 4000 rpm (same for subspindle) Max. spindle speeds on milling spindle 6000 rpm No. of stations in tool changer 40 pcs. Control: PC Fusion 640 A Equipped with: Gantry loader 10 pcs. tool holders

Condition: used, Year of construction: 2019, TSUGAMI B0386E-III Swiss type lathe WORKING AREA Bar diameter Ø mm 8 – 38 Max part length mm 320 (Direct-driven rotating guide bushing) Max part length mm 70 (Without guide bushing) Max drilling diameter Ø mm 13 Max thread diameter M 12 Max chuck diameter for sub spindle Ø mm 38 Max drilling diameter for sub spindle Ø mm 12 Max thread diameter for sub spindle M 12 Max drilling diameter for driven tools Ø mm 10 Max thread diameter for driven tools M 8 Max diameter T-slot cutter (driven tool) Ø mm 45 CAPACITY Max spindle speed main spindle rpm 6000 Max spindle speed sub spindle rpm 7000 Max spindle speed rotating guide bushing rpm 6000 Max spindle speed tool spindle rpm 5000 Number of tool positions pcs 29 Tool size mm 16x16x125, 20x20x125 Rapid traverse speed m/min 32 (Z2, X2) 24 (X1, Y1, Z1, Y2) MOTORS Main spindle kW 11 / 7.5 Sub spindle kW 5.5 / 3.7 Driven tools kW 1.4 (1.0 for cross-drilling units front tool post) Y2 kW 0.5 X1, Y1, Z1, X2, Z2 kW 0.75 Coolant pump kW 0.4 Lubricating oil pump W 3 CONTROL SYSTEM FANUC 32i-B Controlled axes (including C-axes) pcs 8 X1, Z1, Y1, X2, Z2, Y2, C1, C2 LCD / MDI 10.4” color LCD OTHER Coolant tank L 190 Length x width x height mm 2240 x 1515 x 2050 Net weight kg 4950 Power requirement KVA 22.5 EQUIPMENT: Fanuc 32i-B control system with 8 controlled axes (X1, Z1, Y1, X2, Z2, Y2, C1, C2) Cross drilling unit with 4 spindles C-axis for main spindle and sub spindle Automatic programming software Abile Tool height compensation function Tool counter Screen for periodic maintenance Door lock Coolant level detector Spindle cooler Standard tools Retractable coolant nozzle Brake for the main spindle MACHINE PRICE: TSUGAMI B0386E-III (8 controlled axes) OPTIONS INCLUDED IN THE MACHINE PRICE: Tool set gauge O.D. Included Signal tower 3-step Included Work lighting LED Included Bar interface Included High-pressure pump (1.5 kW, 20 bar, 18 l/min) Included Rear drive unit (rear drive, 1.4 kW) Included Brake for sub spindle Included Direct-driven rotating guide bushing (Tsugami 2621-1234) Included Adapted for water-based cutting fluid (water type coolant specification) Included Oil blowing with M code (X-axis front 1, X-axis rear, Z2) Included Adapter for main spindle (Shaublin F37) and sub spindle (Shaublin F37) Automatic power off Included Air blowing for main spindle, sub spindle, and cross drilling unit 2 years Fanuc warranty (from shipment) Transformer, Operator manual, Compliance with European requirements including CE marking Dkolq Ijv Ipuzjq Dyjl Drill set gauge I.D. (Long, Middle, Short) Detail ejector front with oil blowing (stroke 147, max work length 106 mm) Part conveyor with part separator (chute width 135, belt width 90) Rigid tapping also for rotating tools (cross drill, rear drive, back drive) 3 tool spindles for rear drive ER16, max 5000 rpm (tool spindle for rear drive) 4 tool spindles for back tool post (3282-Y041) 4 back adapters (dia 25 fixed tool) Guide bush adapter (Dunner CJ9) Guide-bushless kit incl stopper Chip conveyor (flat type) 10.4” color screen Included Minimum input increment (0.0005mm for X1 & X2, 0.001 mm for other axes) Included Linear interpolation Included Circular interpolation Included G04 Dwell (delay) 0-99999.99 Included Absolute/Incremental programming (X, Z, Y, C absolute / U, W, V and H incremental) Included Number of tool offsets: 99 Included Program memory: 64 kB (80 m perforation tape) Included Num...

Year of construction: 2020, Condition: ready for operation (used), General Data Machine weight 6400 kg Control Unit Model 840D Brand SIEMENS Main Drive Number of spindles 1 Spindle speed range 4000 Number of axis 3 Movement Y-Axis Movement +/- 60mm Turret Dkolqjwg Ih Ne Iq Dyol Number of turrets 1 Number of tool slots 12 Tools Number of station 6 This 3-Axis DMG MORI CLX 450 V4 was manufactured in 2020 and features advanced technology cycles like drilling, threading, and grooving, along with a main spindle speed of 4,000 rpm. It's equipped with a turret that includes 12 driven tools and 6 BT stations, and boasts a direct measurement system in X and Y axis with a Y-axis range of +/- 60mm. Control is managed by the sophisticated SIEMENS 840D. Buy this DMG MORI CLX 450 V4 lathe to leverage its precision capabilities. For further details, please contact us. Application Types Turning

Condition: used, Year of construction: 2007, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 360 mm, total height: 2,810 mm, overall weight: 6,500 kg, bar passage: 65 mm, bar diameter: 65 mm, controller manufacturer: SIEMENS, controller model: 840 D POWER LINE, number of spindles: 2, space requirement length: 6,100 mm, space requirement width: 1,690 mm, CONTROLS .. CNC controls SIEMENS 840 D POWER LINE BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 3 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 3 .. number of b-axes: 3 WORKING RANGE TURNING .. turning diameter (max): 140 mm .. bar diameter (max): 65 mm .. worpiece length max.: 600 mm MAIN SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min COUNTER SPINDLE Dkolq Iqowc Sxqj Dyol .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min .. Z-axis travel: 600 mm X/Z SLIDE .. Z-axis travel: 360 mm .. X-axis travel: 110 mm .. Y-axis travel: 70 mm .. rotating range B-axis up to: 1 ° .. rapid traverse Z: 45 mm/min .. rapid traverse X: 25 mm/min .. rapid traverse Y: 12 mm/min .. number of tool positions (total): 36 .. number of live positions: 36 .. - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS .. mains power supply: 72 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6100 mm .. space requirements -front/back-: 1690 mm .. total height: 2810 mm .. total weight approx.: 6500 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. through spindle coolant attachment: yes .. European CE standards: yes Including bar loader, Profimat 65.8*270/8 year 2005 loading length 500-3000mm. Spindeleinsatzrohren 16,25,30,40,45,55,60,65mm (multi-channel loading magazine) Including chip conveyor Chucks and tools are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,215 h, Functionality: fully functional, machine/vehicle number: MV0091-004741, spindle speed (min.): 12,000 rpm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 1,000 kg, overall weight: 6,500 kg, The new DNM series boasts even greater reliability and improved performance. In addition the new series includes grease lubrication to the roller guideways which is more environmentally friendly. The box slide way concept offers high speed, high rigidity and suitability for all applications. This machine is fully equipped with 12,000rpm BT40 direct drive motor spindle, 20 bar high pressure through spindle coolant, Renishaw probe, tool measuring device, 30 tool magazine and touch screen control panel. Dkslqswabmle Iq Dyjl

Year of construction: 2009, Condition: ready for operation (used), Spindle clearance: 65mm/42mm, tool positions: 3x10, speed: 5000rpm, travel X/Z: 650mm/175mm, travel Y: +/-40mm, machine dimensions X/Y/Z: approx. 4750mm/2400mm/2700mm, weight: approx. 10000kg, operating hours: 76164h, including Knoll KTS 25-38-T coolant system, Resy KBF 452 compact belt filter and FMB turbo 5-55/4200 bar feeder, documentation available. On-site inspection is possible. Expected to be available from Q4 2025. Dkslq Ijwg E A Req Dyel

Condition: good (used), WORK AREA Workpiece tilt: 2,800 mm Clamp diameter: 2,500 mm Dkjlq Iq Del Rcb Dsyjl Maximum turning height: 2,400 mm Horizontal travel: X-axis: 4,310 mm Vertical travel: Z-axis: 1,250 mm Maximum workpiece weight: 25 tons Tool magazine: 116 TURNING Power: 46+46 kW Maximum torque: 69,370 Nm Maximum chuck speed: 205 rpm MILLING Power: 37 kW Maximum torque: 1,415 Nm

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Control: Mazatrol640T Max. machining diameter: 320 mm Bar capacity: 51 mm Travel X/Y/Z: 240/100/495 mm Dkjlq Ijwc Agrjq Dyjl Main spindle speed: 5,000 rpm Motor power: 22 kW Counter spindle Speed: 5,000 rpm Motor power: 22 kW 2 x 12-station turrets with live tools Options: LNS Quick Load Servo III short bar loader Automatic parts gripper Chip conveyor

Condition: good (used), center height: 1,050 mm, center width: 3,000 mm, Lathe Heyligenstedt brand Faceplate diameter 1720 mm Center height 840 mm in the offset 1050 mm Center width 3000 mm Anima digital display Space requirements: Length 6000 mm Width 2700 mm 2000 mm without support Height 2200 mm Djlowb Dx Hsq Iq Dyokl Motor 380 volts 24/18.5 kW The machine can be inspected with power at the supplier's factory.

Year of construction: 2008, Condition: ready for operation (used), General Data Machine weight 6300 Control Unit Brand FANUC Model 18i-TB Dkolqjwchw No Iq Dyol Main Drive Spindle speed range 3500 Spindle motor power 22000 W Movement X-Axis Movement 245 mm X-Axis Rapid Traverse 22 m/min Y-Axis Movement 102 mm Y-Axis Rapid Traverse 8 m/min Z-Axis Movement 1270 mm Z-Axis Rapid Traverse 24 m/min Additional Equipment Documentation/manual This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Application Types Turning

Condition: defective spare-parts repository (used), Lathe Boehringer V 5 Dkjlq Iq Dewb Dvroyel SPW 8000 mm SPH 350 mm Defective, spare parts carrier Separation point after 6 meters 2 steady rests Faceplate

Year of construction: 2005, Condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 260 Z-Axis Movement 610 Dkelq Iewchr Hjq Dysl Media Chip conveyor Yes Additional Equipment Bar Feeder: Equipped with Emco bar loader Chip Conveyor: Included Part Catcher: Integrated turret has 12 positions (all are driven) maximum bar diameters that can be processed are Ø65mm due to the drawtube VDI 30 This EMCO Turn E65 was manufactured in 2005. A horizontal turning machine equipped with an Emco bar loader, chip conveyor, and an integrated part catcher. It features a single turret with driven tools, enhancing its functionality. If you are looking to get high-quality turning capabilities, consider the EMCO Turn E65 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Lathe Brand Roewe Type RSN 71 B Center distance 4000 mm Center height 360 mm over offset 470 mm 16 speeds 10-1000 rpm Length 6000 mm Width 1450 mm Height 1600 mm Dkolowb Dr Hoq Iq Dyol