Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Fpeb Eevi Hryjxznzeg Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: used, spindle bore: 50 mm, center height: 265 mm, turning length: 900 mm, Okuma LS Turning length: 900 mm. Spindle height: 265 mm. Drilling: Approx. Ø50 mm. The gearbox growls a little but runs well. Fjb Exznsvt Nwtezjpg Can be loaded onto a trailer. Can be delivered at an additional cost.

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, turning diameter: 410 mm, spindle bore: 91 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 670 mm, bar diameter: 80 mm, CNC Fanuc 18i - T WORKING RANGE Max. workable bar diameter: mm 80 Max. diam. workable from recovery: mm 410 Fjb Exznswhm Rrezspg Max. workable length: mm 670 Max. rotating diameter: mm 600 MAIN SPINDLE Max. rotation speed: rpm 3,500 Spindle nose: ASA 8 “ Spindle hole: mm 91 Internal diameter of bearings: mm 140 Motor power: kW 22 Motor torque: Nm 539 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction Automatic positioning of B-axis: mm 660 B-axis rapid: m/min 15 TURRET Number of positions: N° 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32-40-50 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: N° 12 Max rotation speed: 4,000 rpm Motor power: 3.7 kW Motor torque: 70 Nm C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: 100 rpm AXES X-axis stroke: 255 mm Z-axis stroke: 670 mm Y-axis stroke: 110 mm (+ 60 / – 50) X-axis rapid: 20 m/min Z-axis rapid: 24 m/min Y-axis rapid: 7.5 m/min COOLANT Tank capacity: 250 l Pump flow rate: 120 l/min Pump motor power: 0.75 Kw DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.450 x 1.900 x 2.100 mm h Height of spindle center: mm 1.600 Weight with chip conveyor: Kg 6.300 Machine equipment: • Self-centering hydro-divider Autoblock type AXN 315 mm • Various motorized tool holders (radial and axial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2013

Condition: good (used), Year of construction: 2006, HAAS CNC lathe GT-20HE - with tool turret Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Febot E Dhme Exznzepg Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, total height: 1,800 mm, total length: 4,900 mm, total width: 1,800 mm, Empty weight: 6.300 kg Price: On request - Documentation available: No - Serial number: 783 - Turning diameter: 700mm - Min. spindle speed: 10rpm - Center height: 350mm - Type digital: Mitutoyo KL Counter - Center distance: 3000mm - Max. spindle speed: 1250rpm - Bore diameter: 75mm - Digital: Yes - Transport dimensions: 4900mm x 1800mm x 1800mm (l x w x h) Fpjb Exznewb A E Sozog - Transport weight [kg]: 6300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2025, Gildemeister 20 completely rebuilt to new condition -AC motor for production time control -AC motor for threading -GM-type soundproof casters -frequency converter for spindle speed programming -bar passage 20mm ,25mm , 28mm with integral loader -Optional : X and Z axis NC cross slides, NC pickup with NC pickup slide -EC brand Fpobsfzk S De Exznzeg

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 Fpeb Eevbb U Hexznzjg with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Machine documentation available .

Condition: refurbished (used), Functionality: fully functional, spindle bore: 40 mm, turning diameter: 315 mm, center height: 135 mm, turning length: 630 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,250 kg, Schaublin 135 Draai bank One of the latest Schaublin 135 machines, uitgevoerd as a Schaublin 150 Specificatie Manufacturer Schaublin Type 135 Bj. onb. Besturing conv. Feb Exzowgd Sqonzopg Draai diameter 315 mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Heidenhain DRO (2-aces) Vaste en Meelopende bril Drieklauw Vierklauw Spantangset B32 Wisselwielen Multifix reedschaphouders Ijlgang op Z-as Enz, enz.

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, CNC Fanuc 32i – model B WORKING RANGE Fjb Exzewhlf Uonzepg Max. workable bar diameter: mm 45 Max. diam. workable from recovery: mm 220 Max. workable length: mm 560 Max. rotating diameter: mm 580 MAIN SPINDLE Max. rotation speed: rpm 5,000 Spindle nose: ASA 5 “ Spindle hole: mm 52 Internal diameter of bearings: mm 90 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction B-axis rapid: m/min 15 TURRET Number of positions: No. 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: No. 12 Max. rotation speed: rpm 4,000 Motor power: kW 3.7 Motor torque: Nm 47 C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: rpm 100 AXES X-axis travel: mm 170 Z-axis travel: mm 560 Y-axis travel: mm + 55 / – 50 B-axis travel: mm 490 X-axis rapid: m/min 20 Z-axis rapid: m/min 24 Y-axis rapid: m/min 6 COOLANT Tank capacity: l 250 Pump flow rate: l/min 230 Pump motor power: Kw 1.5 DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: mm 4.240 x 2.000 x 2.020 h Height of spindle center: mm 1.000 Weight with chip conveyor: Kg 4.900 Equipment machine: • 3-jaw Autoblock self-centering chuck diam. 210 mm • Various motorized modules (axial + radial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2012

Condition: good (used), Pinacho lathe S-90/180 - with digital display - width: 200 cm - Depth: 85 cm - height: 160 cm - with operating instructions Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Fob Esum Rwkjxznzjpg Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION Fpeb Exotuut Uoznzog

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Fpjb Eeuda Tnsxznzeg Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: like new (used), Year of construction: 1997, Functionality: fully functional, spindle bore: 40 mm, turning diameter: 340 mm, center height: 150 mm, center width: 630 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Fsb Exznewgd R Hjzopg Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: good (used), Equipment: documentation/manual, FEELER LATHE MOD. FTC 280 STEERING UNIT : CNC FANUC O - T DIAM. AUTOCENTRATING HYDRAULIC MANDRIN : 250 mm MAX. TURNABLE DIAM : 280 mm MAX. TURNABLE : 635 mm MANDRIN BORE : 62 mm TORQUE : Z AXIS : 670 mm X AXIS : 140 mm TOOL WAREHOUSE : 12 LOCATIONS MANDRIN ATTACHMENT : ASA - 6 MANDRIN SPEED : 45 - 4,500 RPM / MIN. CHIP EVACUATOR VARIOUS TOOLS AND TOOL HOLDERS SUPPLIED COMPLETE WITH DOCUMENTATION MEASURES D' OVERALL DIMENSIONS : LENGTH WITH EVACUATOR : 3,70 MT. WIDTH : 1,80 MT. HEIGHT : 1,75 MT. WEIGHT : KG. 5,000 NOTES : Fpjb Exotu Tr Uoznzjg WORKING MACHINERY AND IN EXCELLENT MECHANICAL AND ELECTRICAL CONDITION , CONNECTED , ANY EVIDENCE. EQUIPPED MACHINERY !

Condition: used, Year of construction: 2007, BIGLIA B 550 B LATHE YEAR OF FIRST INSTALLATION: 2007 DIAM. SELF-CENTERING CHUCK: 250 mm MAX. DIAMETER OF BAR WORKING: 65 mm MAX. DIAM. OF REWORKING: 300 mm MAX. LENGTH OF WORKING: 550 mm MAX. DIAM. OF ROTARY WORK: 580 mm SPINDLE SPEED: 40 – 4,000 RPM SPINDLE HOLE: 76 mm TURRET: 12 POSITIONS (INCLUDING VARIOUS TOOL HOLDERS) STROKE: X: 173 mm Z: 550 mm B: 580 mm (TAILSTOCK) Fpeb Exzev Nwdasnzeg CHIP CONVEYOR COMPLETE WITH DOCUMENTATION

Condition: good (used), Year of construction: 2008, BIGLIA MOTORIZED LATHE B 1200 Y YEAR OF FIRST INSTALLATION: 2008 CNC: FANUC Series 18i – TB MANUAL GUIDE DISTANCE BETWEEN CENTERS: 1,200 mm MAX. ROTARY DIAM.: 500 mm MAX. TURNING LENGTH: 1,200 mm Fjb Exsvdkqpjznzspg MAX. TURNING DIAM.: 400 mm SELF-CENTERING DIAM.: 315 mm BAR PASSAGE: 95 mm SPINDLE HOLE: 110 mm SPINDLE SPEED: 40 – 2,800 RPM TOOL TURRET: 12 POSITIONS / 12 MOTORIZABLE N° 2 MOTORIZED INCLUDED / 1 AXIAL + 1 RADIAL MOTORIZED POWER: 5.5 KW STROKE: X: 255 mm Z: 1,315 mm Y: 110 mm ( + 60 / - 50 ) mm TAILSTOCK DIAM. QUILLER: 115 mm QUILLER STROKE: 150 mm TOTAL WEIGHT: 7,000 KG. CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION. MACHINE IN EXCELLENT USED CONDITIONS. CONNECTED.

Condition: good (used), Year of construction: 1998, Equipment: documentation/manual, AVM Angelini Snupy two-axis lathe The AVM Angelini two-axis lathe has 42 mm bar passage. The machine is equipped with a two-axis turret Main characteristics of the AVM Angelini lathe model SNUPY: DIAM. AUTOCENTRATING : 210 mm Height of centers 190 mm Distance between centers 500 mm Bar passage 42 mm X-axis travel 275 mm Z-axis cosrsa 400 mm Rapid X-axis 16 m / min Rapid Z-axis 20 m / min Spindle nose Feb Exznotu Hqcjzepg ASA 5 " Spindle power 15 Kw Maximum spindle speed 3,500 RPM / MIN. Numerical Control Fanuc Series 0 - T Year of construction 1998

Condition: used, Year of construction: 2007, HAAS SL – 20 LATHE YEAR: 2007 MAX. TURNING DIAM.: 262 mm MAX. TURNING LENGTH: 508 mm HAAS CNC TRAVELS: X: 215 mm Z: 508 mm RAPID: 30 M / MIN. MAX. SPINDLE SPEED: 4000 RPM SPINDLE CONNECTION: ASA – 6 SPINDLE HOLE DIAM.: 56 mm Fjb Exowgmmdsznzepg DISTANCE BETWEEN SPINDLE NOSE AND TAILSTOCK: 610 mm TURRET: 10 POSITIONS VARIOUS TOOLS AND TOOLHOLDERS SUPPLIED PROGRAMMABLE HYDRAULIC TAILSTOCK WEIGHT: KG. 4,800

Condition: used, Year of construction: 2001, LATHE MAZAK SUPER QUICK TURN 200 CNC MAZATROL 640 T IMPRESSIVE AND VERY EQUIPPED MACHINERY SELF-CENTERING SPINDLE: 220 mm SPINDLE SPEED: 35 – 5,000 RPM TRAVELS: X: 190 mm Z: 535 mm TOOL MAGAZINE: 12 POSITIONS CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION WEIGHT: KG. 5,000 YEAR OF FIRST INSTALLATION: 2001 Fpob Exzsv Nig Tenzeg

Condition: used, Year of construction: 2017, DOOSAN PUMA V550 LATHE YEAR OF FIRST INSTALLATION: 2017 Fpjbev U Sxcj Exznzjg DOOSAN CNC – FANUC i Series NEW SELF-CENTERING CHUCK: DIAM.: 450 mm MAX. ROTARY DIAM.: 800 mm MAX. TURNING DIAM.: 730 mm MAX. TURNING HEIGHT: 750 mm SPINDLE SPEED: 2,000 RPM TRAVELS: X: 390 mm Z: 780 mm RAPID FEEDS: X – Z: 12 – 16 MT. / MIN. TOOL HOLDER TURRET: 8 POSITIONS (INCLUDING TOOL HOLDERS) WEIGHT: KG. 9.000 COMPLETE WITH ALL DOCUMENTATION

Condition: good (used), Year of construction: 2002, DAEWOO PUMA 230 M LATHE Rotating diam. on the bench 550 mm. Fpeb Exjuigu Neznzsg Rotating diam. on the carriage 390 mm. Turning diam. on the bench 290 mm. Turning length 490 mm. FANUC CONTROL 18i -T SPINDLE NOSE ASA 8 SPINDLE REVOLUTIONS : 3,500 RPM. DIAM. AUTOCENTRATING : 220 mm BAR PASSAGE : 76 mm SPINDLE MOTOR POWER : 11 / 18.5 KW C AXIS TURRET 12 POSITIONS ALL MOTORIZED NO. 01 AXIAL MOTORIZED TOOL NO. 01 RADIAL MOTORIZED TOOL MACHINE WEIGHT : KG. 4.500 ACCESSORIES : CHIP EVACUATOR TOOL PRESETTER READY FOR DELIVERY YEAR FIRST INSTALLATION : 2002

Condition: excellent (used), Year of construction: 2008, HAAS TL - 3 SELF-LEARNING LATHE YEAR : 2008 SPINDLE DIAM. : 305 mm MAX. TURNING DIAM. : 508 mm MAX. TURNING LENGTH : 1,524 mm BAR PASSAGE : 86 mm TRAVELS : X : 305 mm Z : 1,524 mm MAX. SPINDLE SPEED : 1,800 RPM TAILSTOCK WEIGHT : KG. 3,500 Fsb Eov Hxwisxznzepg

Condition: good (used), Year of construction: 2006, BIGLIA B 301 LATHE FANUC Series 21i - T CNC 2-AXIS LATHE COMPLETE WITH DOCUMENTATION Fob Exzsvrwqxenzepg YEAR OF FIRST INSTALLATION: 2006

Condition: good (used), Year of construction: 2012, CMZ TL 25 BM MOTORIZED LATHE YEAR: 2012 Fsb Exjvzg Sqjznzopg CNC GE FANUC Series 32 i – MODEL A DIAM. SELF-CENTERING SPINDLE: 250 mm MAXIMUM WORKABLE DIAMETER: 450 mm DISTANCE BETWEEN CENTERS: 670 mm SPINDLE SPEED: 50 – 3,500 RPM BAR PASSAGE: 77 mm SPINDLE NOSE: ASA - 8 POWER: 11 / 15 KW TURRET: 12 POSITIONS (ALL MOTORIZABLE) N° 4 MOTORIZED INCLUDED (2 AXIAL + 2 RADIAL) STROKE: X: 240 mm Z: 640 mm CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION WEIGHT: 6,000 KG.

Condition: good (used), Year of construction: 2017, ECOCA 1400 MACHINING CENTER CNC FANUC 0i – MB YEAR 2017 TRAVELS: X: 1,400 mm Y: 760 mm Z: 700 mm DISTANCE SPINDLE NOSE – TABLE: 120 – 820 mm TABLE SIZE: 1,500 mm x 650 mm T-SLOT ON THE TABLE: 6 X 18 X 100 LOAD CAPACITY ON THE TABLE: 1,600 KG. SPINDLE ROTATION SPEED: 10,000 RPM. SPINDLE NOSE CONNECTION: ISO 40 RAPID (X/Y/Z): 20/20/15 TOOL MAGAZINE: 24 PLACES SPINDLE MOTOR POWER: 15 / 18 KW MACHINE WEIGHT: KG. 11,000 Fjb Exznju Rdiiezjpg MACHINE IN EXCELLENT CONDITION!