Condition: ready for operation (used), Year of construction: 1984, spindle bore: 76 mm, turning diameter: 920 mm, turning length: 4,000 mm, Capacity 4000 x 760 mm Bore 76 mm Fast 4-jaw chuck Djb Eju E Twlo T N Hyeut Multifix type C turret Stand

Condition: used, Year of construction: 1999, Technical details: Deb E T N Hjv Tnnqoysut total power requirement: 1,5 kW

Condition: like new (used), Year of construction: 2021, operating hours: 808 h, Functionality: fully functional, Citizen M16 VIII machine comes with a high preasure pump Mueller CL1, FOX WS 2 - 1000 oil mist collector, Minimag 20 barfeeder. Also Microconic MASA ultra precise collet for sub spindle with lots of collets. Machine barely worked, and is as new, fully functional. Deb E Towhbdao N Hyout Esprit CAM with postprocesor also avaiulable

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ Dueb E Tewbvhaj N Hyjt - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: used, Manufacturer: ALSTHOM Model: NUA 160 h Machine type: Milling machine (specific details not available) Rotation speed: 1440 rpm Frequency: 50 Hz Dsb E T Neupkixe Hyout Voltage: 220/380 V Motor power: 7.5 kW Current: 27 A / 15.5 A

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 7 [mm] - Max. machining length : 125 [mm] - Spindle speeds : 16.000 [rpm] - Spindle power : 1.1 / 1.5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 7 [mm] - Spindle speeds : 16.000 [rpm] - Spindle power : 1.1 / 1.5 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 9.000 [rpm] - Live tools power : 0.35 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 3 END ATTACHMENT - Number of positions : 3 POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1480 x 895 [mm] - Machine height : 1515 [mm] - Machine weight : 1000 [kg] EQUIPMENT - CNC : Fanuc i Series - 3 colors status lamp - Rotating guide bush - Coolant tank - Ejection of workpiece Dusb E T N Hswgfdnsyst - Parts catcher - Bar loader : FMB MICROMAG 20 - Electric transformer

Condition: ready for operation (used), Year of construction: 1984, CNC numerical Duebov Nqico E T N Hyot 1600mm platen, maximum diameter 3200mm 1600mm clearance height 20 tons permissible weight 160 rpm maximum rotation speed

Condition: used, Year of construction: 2007, turning diameter max. 366 mm turning length 705 mm control M 720 BM MAPPS 3 greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 254 mm C-Axis 0,001 ° Dusb E T N Hjvh Hx Deyot number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm tailstock 734 mm taper of center MT 3 diameter of quill 80 mm feed speeds max. 30.000 mm/min rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 total power requirement 43 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 MC / 700 - Tool-Drive - C-Axis - Tailstock

Condition: used, Functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Dujb E Towfiaqe N Hyot Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: ready for operation (used), Year of construction: 1997, turning diameter ? mm turning length 500 mm Dujbswa Upgj E T N Hyjt control Mazatrol T Plus weight of the machine ca. 6 t dimensions of the machine ca. 8 * 2,5 * 2,5 m

Condition: good (used), Year of construction: 1999, Functionality: fully functional, GDW LZ 350 S Lathe + Accessories Manufacturer: GDW Type: LZ 350 S Condition: used Year of manufacture: 1999 Center height: 175 mm Dob E T Newbqpfe Hyout Rotation diameter over bed mm 310 Rotation diameter over cross slide mm 195 Center distance 800 mm Spindle head DIN 55027 size 5 Spindle bore mm 43 Collet bore mm 27 Inner taper similar to DIN 228 shortened ME 50 Chuck diameter normal/max. mm 160/200 Face and clamping disk diameter max. mm 315 Tool slide Cross slide travel mm 185 Top slide travel mm 115 Swivel range of the top slide 90/-65 degrees Tool system size B Tailstock with handwheel Quill stroke mm 110 Quill diameter mm 50 Mounting taper to DIN 228 3 MK 3 Gear stages 2 Spindle speeds V 45 70 90 110 140 175 220 350 rpm Spindle speeds W 250 400 500 630 800 1000 1260 2000 rpm Dimensions: 1810 x 900 x 1400 mm Weight: 800 kg Scope of delivery: - Oroginal documentation - Three-jaw chuck - Digital display - Coolant system - Multifix B tool holder - Machine feet

Condition: repair required (used), Year of construction: 2012, Functionality: limited functionality, machine/vehicle number: 232-0001, spindle speed (max.): 15,000 rpm, spindle speed (min.): 1 rpm, bar passage: 10 mm, total width: 870 mm, total length: 1,670 mm, total height: 1,650 mm, turning diameter: 6 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 1,700 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, Equipment: cooling unit, NO BAR FEEDER! General Data: - Width: 870 mm Duob E Tsv Tfx Hs N Hyjt - Depth: 1670 mm - Height: 1650 mm - Machine weight: 1700 kg Control: - Brand: FANUC - Model: 32i-MODEL B series Main drive - Number of spindles: 2 - Spindle speed range: 15,000 rpm - Number of axes: 5 Workpiece: - Workpiece diameter: 6 mm Additional Equipment: - Kraft and Bauer fire extinguishing system - High-pressure oil system This 5-axis TORNOS Micro 8 Swiss lathe was manufactured in 2012. It features a FANUC 32i-MODEL B series control, a spindle speed of 15,000 rpm, and a maximum diameter of 6 mm. If you are looking for a high-quality lathe, you should consider the TORNOS Micro 8, which we have for sale. Contact us for more information about this machine. Repair required: Encoder defective. Spindle stored unchecked (repair costs approximately €1,000). According to the customer! There may be deviations between the stated and actual values, which must be confirmed by the sales representative.

Year of construction: 2021, Condition: ready for operation (used), Control Unit Brand FANUC Main Drive Number of axis 3 This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information. Application Types Duob Eowbk Uze T N Hyot Turning

Condition: good (used), Year of construction: 1984, Thomann EED 20 Automatic Bar Lathe For square and flat bars Capacity range: 6-20 mm Flat steel: 10/3-30/10 mm Turning length: 25-900 mm Deb E Tewbglio N Hyout Technical specifications Length: 1200 mm Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotation speed: 7 rpm

Condition: used, Year of construction: 1999, CNC Swiss-Type Lathe Manufacturer: Citizen Type: M-12 Year of Manufacture: 1999 Dob E T N Hewbtlceyjut Technical Details: Turning Diameter: 12 mm Turning Length: 200 mm Spindle Bore: 12 mm Speed: 12,000 rpm Bar Feeder: IEMCA Genius 112/32 Machine Weight: Approx. 2.3 t Space Required: Approx. 1.8 x 1.2 x 1.6 m

Condition: good (used), In good technical condition and fully functional. FANUC control system Spindle speed range: 8 – 3150 rpm Spindle motor power: 30/35 kW Djb E Tewcxblo N Hyeut X-axis 1800 mm Y-axis 1500 mm Z-axis 1200 mm Machine dimensions: length x width x height 12000 mm × 9200 mm × 5500 mm Machine weight approx. 45,000 kg.

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Duob Eswbqnuo T N Hyot Further information will follow

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 2000 mm Measurements depth 3900 mm Measurements height 2200 mm Control Unit Brand INDEX Model C200-4D Main Drive Spindle speed range 7000 Dsb Ejwblals T N Hyeut Number of axis 4 Movement X-Axis Movement 70 mm Y-Axis Movement 70 mm Z-Axis Movement 250 mm This 4-axis Index C100 was manufactured in 2007. A robust horizontal turning machine, it offers precision and efficiency for complex turning operations. If you are looking to get high-quality turning capabilities, consider the Index C100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2004, turning length: 200 mm, turning diameter: 20 mm, overall weight: 3,300 kg, rotational speed (max.): 10,000 rpm, CNC Swiss-Type Lathe Manufacturer: Citizen Type: L-20 Year of Manufacture: 2004 Technical Details: Dujbowbr Amo E T N Hyjt Turning Diameter: 20 mm Turning Length: 200 mm Spindle Speed: 10,000 rpm Bar Feeder: IEMCA Boss 332/R/E 32 L Machine Weight: 2300 kg Bar Feeder Weight: 810 kg

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Dob E Tswbpqbs N Hyjut Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Dob Eewbk U Ie T N Hysut Main Drive Number of axis 3 Media Main electronic connection 40 kVA This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Dobswbpp Rs E T N Hysut Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Year of construction: 2023, Condition: ready for operation (used), Control Unit Brand SIEMENS Model C200-sl Main Drive Spindle speed range 6000 rpm Spindle motor power 32kW Stroke 20mm Number of axis 5 Movement Z-Axis Movement 700 mm Z-Axis Feed Force 5000N Z-Axis Rapid Traverse 50m/min Additional Equipment Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control. Deb E T Njwblb As Hyeut Environmental data: Noise level: 73.8 dB(A) This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2007, Condition: ready for operation (used), Control Unit Brand FANUC This Pinacho SMART 360 was manufactured in 2007. A horizontal turning machine, it represents a solid choice for those in need of reliable turning operations. Contact us for more information. Djb E Towacczo N Hyeut Application Types Turning

Year of construction: 2008, Condition: ready for operation (used), Control Unit Dusb E T N Hjwacc Ijyet Brand FANUC Main Drive Spindle speed range 2000 rpm This Pinacho SMART 260 was manufactured in 2008. A reliable horizontal turning machine, it offers consistent performance for various machining tasks. Ideal for workshops requiring precision in turning operations. Contact us for more information. Application Types Turning