Year of construction: 2023, Condition: ready for operation (used), General Data Machine weight 7700 kg Control Unit Brand HURCO Main Drive Number of axis 4 Movement X-Axis Movement 222.5 mm X-Axis Rapid Traverse 24 m/minute Y-Axis Movement +/- 55 mm Y-Axis Rapid Traverse 30 m/minute Dsbuev Rr Tlj Rwkajkl Z-Axis Movement 670 mm Z-Axis Rapid Traverse 12 m/minute W-Axis Movement 740 mm W-Axis Rapid Traverse 30 m/minute Turret Tool taper VDI40 DIN1809 Tools Number of station 12 Additional Equipment Voltage Required / Fuse rating: 3-phase 380V/415V 50 Hz/125 amp D rated MCCB Power Rating / Full Load KVA: 68.6 KVA Air Requirements: 5 CFM 80-100 PSI / 0.14 M3/min. 6-8 bar / 0.1 connected via a 12 mm nylon push fit This 4-axis Hurco TMX10-MYSi horizontal turning machine was manufactured in 2023. Ideal for precision machining, it offers advanced multi-tasking capabilities. Consider the opportunity to buy this Hurco TMX10-MYSi horizontal turning machine. Contact us for more information. Application Types Turning

Condition: refurbished (used), Spindle bore diameter 250 mm Distance between points 6.000mm Height between points 600mm Diameter admitted on bench 1.200mm Diameter admitted on carriage 910mm Admitted diameter on neck 1,500mm Neck length 410mm Bench width 630mm Course transversal cart 670mm Course charriot superior 200mm Dksbu Rsg Rn U Ijwkaol Course counterpoint shaft 250mm Diameter axis tailstock 120mm

Condition: used, Manufacturer unknown! Clamping plate, Diameter approx. 800 mm with KK8 chuck Price per piece = EUR 550.00 net Djbu Rwowbih Hokaokl Manufacturer unknown!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,250 h, Functionality: fully functional, machine/vehicle number: 01360009611, The machine is in very good condition. Machine with counter spindle, single turret, and Y-axis. Dobu Rwewf Nixokaekl New spindle installed in 2017. (Main spindle)

Condition: excellent (used), Year of construction: 2004, Swing over bed 800 mm Swing over saddle 490 mm Recom. machining dia 550 mm Max. machining dia. 730 mm Max. work lenght 750 mm X axis 390 (20+2370) mm Z axis 780 mm Chuck dia. 380 mm Speed range 20-200 rpm Spindle nose A2-11 Spindle bore dia 90 mm No. of tool stations (Type) 8(Base holder) OD tool height 32 mm Boring bar dia. 50 mm Djbuswh Nwhj Rwkajkl Indexing time 0.15 sec Rapid traverse X:12000 mm/min Z:16000 mm/min Cutting feed X,Z:0,001-500000 mm/rev Spindle (Cont./30min) 30/37 kW Feed drives X:2.1/Z3.8 kW Coolant pump 0.4 kW Power requirements 50 kVA

Condition: good (used), Year of construction: 1990, overall weight: 1,200 kg, Faceplate, Werner Gigant, Type: PL 1600 - Cast Iron, Without Jaws Diameter 1600 mm with transport frame. Weight approx. 1200 kg. See photos for details. Good condition. Debu Rewaidfewkajkl

Condition: good (used), Year of construction: 2012, operating hours: 7,800 h, CNC Lathe - DMG CTX 510V3 X-axis 330 mm Z-axis 1,050 mm Siemens Sinumerik 840D Shopturn Control Dobu Rwkewfgkysaskl Spindle speed 3,200 rpm Main spindle power 33 kW Turning diameter 465 mm Turning length 1,050 mm Swing diameter 680 mm Number of tool positions: 12 Technical features: C-axis, driven tools

Condition: good (used), Year of construction: 1980, turning dia. 2500 mm, two vertical supports, one side Dksbu Rwkewgiwfoajl

Condition: good (used), Year of construction: 1996, Serial No. 489, Operating Hours 38,433, Control, TRAUB, Type TX8F, 7 axes, main spindle, counter spindle, 2 turrets, 2 C-axis, 1 Y-axis, TRAUB/Stamag bar feeder, Type DN61, coolant system, parts removal, chip conveyor, air filter, accessories - feeder coupling defective Djbewazlbou Rwkaskl +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 1971, Used LZS lathe, VDF Heidenreich & Harbeck, Type M530 Center height: 265 mm Center distance: 2000 mm Swing diameter: over bed: 540 mm Spindle bore: 65 mm Spindle mount: size 8 Tailstock taper: 5 MT Spindle speeds: 9 - 1800 rpm Feed rates: longitudinal/transverse 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space required: 4580 x 1250 x 1330 mm Weight: 3200 kg Dkebusv U U Rbs Rwkasl With Acu-Rite digital readout

Condition: ready for operation (used), - USED - CONVENTIONAL LATHE WITH DIGITAL READOUT SYSTEM CENTRE HEIGHT: 500 mm DISTANCE BETWEEN CENTRES: 6000 mm MAX TURNING DIAMETER OVER BED: 1000 mm MAX TURNING DIAMETER OVER CARRIAGE: 310 mm BAR CAPACITY: 150 mm ACCESSORIES: RAPID FEEDS OVER CARRIAGE ; STEADY REST ; PLATEAU Dkobu Rwoqam Azjkael

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. See data sheets for details. Dobuowah Rqj Rwkaekl

Condition: good (used), Year of construction: 2004, Serial No. 7041117, TX8i control system, 7 axes, 2x 10-station tool turrets, 2x C-axis, 1x Y-axis, driven tool stations, bar loading magazine, make FMB, type Turbo 10-72XT / 3,200 mm, max. bar diameter 72 mm, max. bar length 3,200 mm, chip conveyor, make KNOLL, type 240 S-1/50, coolant system - subject to prior sale - Dsbu Rwksway S Hoaekl +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Turning diameter over bed (mm) 365 Turning length (mm) 1000 Dkobu Rwkjv U Uvwjajl Spindle bore (mm) 42.5 Max. turning diameter over slide (mm) 205 RPM / speed 38 - 1600 (16x) Accessories: Digital readout, 2 axes 3rd spindle chuck 250 mm, 4th spindle chuck 200 mm, documentation, and Multifix tool holder

Year of construction: 2018, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 291 mm MAX TURNING DIAMETER: 320 mm SPINDLE: 3200 rpm; 7,5-11 kW X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 350 mm RAPID FEEDS X-Z: 24 - 30 m/min Dkobu Rwkoq Ilbweaol TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TF WEIGHT: 3500 Kg OVERALL DIMENSIONS: 2214 x 2220 x 2713 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH 16-POSITIONS GANTRY-TYPE LOADING SYSTEM

Condition: good (used), Year of construction: 2008, Serial No. 1000(043), FANUC control, type Series 18i-TB, 7 axes, max. bar diameter 16 mm, max. turning length 205 mm, max. speed 6,000 rpm, main spindle (X/Z/Y/C), counter spindle (X/Z/C), 3 driven tool stations, small parts removal device, bar loading magazine, FMB, type minimag 18, coolant, oil Djbu Rwkeway Rvsaekl +++ Attention: Machine is part of an online auction! +++

Year of construction: 2002, Condition: ready for operation (used), - USED - 5-AXIS CNC LATHE MAX TURNING LENGTH: 760 mm MAX TURNING DIAMETER: 330 mm BAR CAPACITY: 65 mm Dkjbu Rwjmmlprjkael SPINDLE: 4500 rpm; 11-15 kW; ASA A2-6 ; 210 mm COUNTER SPINDLE: 6000 rpm; 5,5-7,5 kW; 169 mm X-AXIS TRAVEL: 250 mm Y-AXIS TRAVEL: ± 50 mm Z-AXIS TRAVEL: 830 mm B-AXIS TRAVEL: 830 mm RAPID FEEDS X-Y-Z: 24 - 7,5 - 20 m/min DRIVEN TURRET HEAD: 12 POS; 6000 rpm CONTROL UNIT: FANUC 18i-T WEIGHT: 5350 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2060 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER NOTE: PART CATCHER WITH BELT; AUTOMATIC DOOR OPENING SYSTEM

Condition: good (used), Year of construction: 2004, Serial No. 4990, control system, Tornos-Bechler FANUC, type PNC Deco, 5 axes, speed 7000 rpm, main spindle, counter spindle, driven tool 2, bar feeder, Tornos-Bechler, type 4990, year of manufacture 2003, wooden accessory cabinets, each with 2 doors, W 1,000 mm, H 1,800 mm, D 400 mm, contents: turning tools, driven tools, lathe accessories, loading magazine/power supply amplifier (Fanuc) defective +++ Attention: Machine is part of an online auction! +++ Dobjway N Esu Rwkajkl

Year of construction: 1995, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE MAX ROTATING DIAMETER: 530 mm MAX TURNING LENGTH: 500 mm MAX TURNING DIAMETER: 340 mm BAR CAPACITY: 62 mm SPINDLE: 3800 rpm; 11-15 kW; ASA A2-6" X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 15 - 20 m/min TURRET HEAD: 12 POS CONTROL UNIT: OKUMA OVERALL DIMENSIONS: 2815 x 2815 x 1745 mm Dsbu Rwkjiidpysaokl ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: good (used), Year of construction: 2006, Serial No. ST20G0030, control, manufacturer FANUC, type Series 31i-MODEL A, 6 axes, turning diameter max. 20 mm, turning length max. 200 mm, 5 driven tool stations, bar loading magazine, manufacturer FMB, type Turbo 3-26, bar length max. 3,200 mm, small parts dispensing device, chip conveyor, manufacturer FMB type ST20G, cooling lubricant system Dkobu Rjway Izswkaol

Year of construction: 2014, operating hours: 8,674 h, Condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; Djbu Req H Tr Tswkaskl USB PORT

Condition: good (used), Year of construction: 2006, Serial No. 0254(045), Fanuc control, Series 18i-TB, 7 axes, bar diameter 32 mm, headstock stroke 310 mm, main spindle with 4 axes X/Z/Y/C, counter spindle with 3 axes X/Z/C, bar feeder, FMB, type Turbo 3-36, max. bar length 3,600 mm, chip conveyor, Mayfran, oil coolant system - counter spindle guide requires overhaul +++ Attention: Machine is part of an online auction! +++ Dkobujway Ibs Rwkajl

Condition: good (used), Year of construction: 2011, Serial No. 0984(082), Fanuc Series 30ia control system, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 18 tool stations, including 5 driven tool stations, LNS Hydrobar Express 220 bar feeder, oil coolant system Djbu Rwkjway Hdjaokl +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2012, Serial No. 2465 (110), FANUC control, type Series 31i-MODEL B, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6000 rpm, main spindle, 4 axes X/Y/Z/C, counter spindle, 3 axes Z/X/C, 21 tool stations, including 5 driven tool stations, bar magazine, make FMB, type Turbo 2-20, small parts dispensing system, chip conveyor, make LNS, type Turbo HB Dkebu Rwkjway Dpeael +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2000, Serial No. 0624(061), control system, FANUC, type Series 18i-T, 7 axes, turning diameter 20 mm, headstock stroke 205 mm, speed 6,000 rpm, main spindle, 4 axes (X/Z/Y/C), counter spindle, 3 axes (X/Z/C), 14 tool stations, including 5 driven tool stations, small parts removal device, bar loading magazine, FMB, type Turbo 3-26, operator terminal, bar length 3,200 mm, oil cooling lubricant system Dksbu Rswayz Iswkaol +++ Attention: Machine is part of an online auction! +++