Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min Cgobowgapxs Eylkuet x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Year of construction: 2020, Condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Cgsb Esv Tfk Aoylkuot Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Application Types Turning

Condition: excellent (used), Year of construction: 1999, CNC Control: MSD-501II (FANUC 18i-T) X-axis mm: 210 Z-axis mm: 550 Y-axis mm: - Maximum Turning Diameter mm: 250 C-axis Increment: 0.001 Maximum Turning Length: 500 Cutting Feed mm / min X, Z, Y: - Travel over Bed mm: Ø Travel over Carriage mm: Ø Bar Pitch mm: Ø 51 Max Rapid Traverse m / min X,Z: 18.24 Main Spindle 6" Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Spindle Bore: - Main Spindle Nose A2-6 Sub-Spindle Spindle Speed rpm: 4,000 Spindle Power kW: 7.5 Torque Nm: - Sub-Spindle Bore mm 41 Cgsb Ejwf E Aneylkujt Sub-Spindle Nose A2-5 Turret Positions 12 Number of Live Tool Stations 12 Live Tool Speed rpm: 3,000 Live Tool Power kW: 5.5 EQUIPMENT Chip Extractor Bar Loader 10-65 Bar Loader Interface Manuals Included Basic Fixed Tool Holder Equipment 1 x Axial and 1 x Radial Power Tools

Condition: used, turning diameter over cross slide: 230 mm, turning diameter over bed slide: 380 mm, center height: 190 mm, center width: 1,270 mm, Center Lathe Manufacturer: Strojimport, Type TK 380 x 1500 Technical Specifications Manufacturer: Strojimport Type: TK 380 x 1500 Year of Construction: Unknown Control: Conventional Center Distance: 1270 mm Turning Diameter over Bed: 380 mm Turning Diameter over slide 230 mm Center height 190 mm Spindle speed 45 – 2000 rpm Bed width / length / height 300 / 2120 / 305 mm Spindle bore 52 mm Dimensions: L 2.70 x W 1.00 x H 1.60 m Machine weight: 1200 kg Equipment - 3-axis digital readout - 3-jaw chuck with internal and external chucking - 2 live centers - 1 fixed center - 4 quick-change tool holders Cgjbswgch Ds Eylkuot - 1 steady rest - 1 drill chuck - Machine feet All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: used, Year of construction: 1951, serial number 13691 3-jaw-chuck diameter 400 mm centre height 450 mm centre distance 2000 mm Cgob Eylkjwg Ht Deuet tail stock ja rapid clamping device 4 seiten digital readout ja nachgerüstet steady ja

Year of construction: 2019, Condition: excellent (used), SEMA Mechanical Engineering Type MT-40-C Technology drilling Year of manufacture 2019 Control unit Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Date of availability 05/2025 Weight 23 tons Cjb Eswf R N Hsylkusgt

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Ceb Eylkewgapljuogt Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: good (used), Used LZS lathe, Arad SN 601 Turning diameter over bed: 610 mm Turning diameter in bed bridge: 830 mm Cob Eowf N Etsylkuegt Center distance: 1,500 mm Spindle bore: 110 mm 3rd jaw chuck: 315 mm Weight: approx. 3.3 t.

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, net weight: 20,000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat Maximale horizontale slak: 950 mm Maximale verticale slak: 700 mm Horizontale schuifmaat Maximale horizontale slak: 630 mm Maximale verticale slak: 1000 mm Dwarsbalk maximale slak: 660 mm Cgeb Eylov Sftzjkuot Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long: 3170 mm Wide: 3030 mm

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> Csb Eylkewf D S Ieuogt This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 1982, centre height ca. 150 mm centre distance 1300 mm vorhanden diameter ca 250 mm digital readout 1x make Heidenhain u. Werkzeug-Sc serial number 63-06 Cjbop Icp Ue Eylkujgt

Year of construction: 2019, operating hours: 3,934 h, Condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment Automatic tool probe Bar feeder with guide adapter and collets for bars Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) Ceb Eylowhgtgekujgt This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. Cobowgan Uo Eylkujgt 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: good (used), Year of construction: 1999, Center height 550 mm Turning diameter over bed 1100 mm Turning diameter over support 830 mm Center distance 2000 mm Spindle bore 95 mm Spindle mount DIN 55027 size 11 Bed width 700 mm 21 speed settings 8 – 800 rpm Workpiece weight between centers 6000 kg Workpiece weight between centers and 1 steady rest 7600 kg Workpiece weight in 3-jaw chuck 1000 kg Feed range longitudinal 0.010 – 12.8 mm/rev transverse 0.05 – 6.4 mm/rev Rapid traverse Z/X 4/2 m/min 60 metric threads 1 – 120 mm 56 inch threads 30 – 1/4" 45 module threads 30 – 0.25 module Tailstock mount MT 6 Quill travel 300 mm Quill diameter 130 mm Drive power 27/17 kW Dimensions L x W x H 4500 x 1750 x 1700 mm Weight 7800 kg Accessories / Special Features: Ceb Eyljv Rvztokuogt • 3-axis digital readout, HEIDENHAIN • 3-jaw BISON face-to-face scroll chuck, Ø 630 mm • 1 stationary steady rest with rollers up to Ø 750 mm • Automatic top support feed • "Multifix" quick-change system, size D2 • Main drive 27/17 kW • Tailstock quill with reduction gear for quill adjustment 1:1 + 1:5 • Large, movable chuck guard • Leadscrew and feed screw guards • Machine light • Feed + rapid traverse in all axes • Coolant system • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2005, Gildemeister CTX 210 V3 Year of manufacture 2005 Machine number 0145000132A Fanuc control Maximum turning length: 300 mm Max. turning diameter: 200 mm Spindle bore: 45 mm Turning diameter over bed: 380 mm Main spindle speed range 6000 rpm Csb Eylkjvt S H Djuegt Main electronic connection: 400 V / 50 Hz Total power requirement: 21 kVA Dimensions LxWxH 2885 x 1720 x 1670 mm Weight approx. 4200 kg Travel paths: X-axis 165 mm Z-axis 340 mm Equipment: - Driven tools - Tool holder VDI30 - Part catcher - Tailstock - Chip conveyor - 12 Turret positions The machine was in operation until recently and is fully functional. Price net, free loading from warehouse

Condition: used, Year of construction: 2021, number of spindles 8 Cgsb Eylkjwf D Szsust bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 1990, Control Heidenhain TNC 355 Cgjb Eyled N Sngskujt x-travel 1.000 mm y-travel 400 mm z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand HEIDENHAIN Main Drive Number of axis 3 Additional Equipment Scope of delivery: Machine, clamping system, chip conveyor This 3-axis GORBREX TKV 525 CNC was manufactured in 2021, offering precise vertical turning capabilities. Ideal for detailed machining tasks, this machine maintains robust construction and modern design. Consider the opportunity to buy this GORBREX TKV 525 CNC vertical turning machine. Contact us for more information. Application Types Turning Cgobswhgr No Eylkuot

Condition: excellent (used), Multifix base body D 1 with 9 interchangeable inserts Cjb Eylowf Afyokujgt Stock number (28617) 2 x D 65 x 180 2 x D 50 x 180 3 x D 40 x 180 1 x J 63 x 180 1 x H 63 x 180 1 x sleeve 63 x MK 5 (L 563) Weight 100 kg

Condition: good (used), Faceplate: 3600 mm Turning diameter: 4000 mm Max. height under crossbeam: 2950 mm Vertical ram travel: 1750 mm Horizontal ram travel: 2255 mm Cjb Eylkswf Iwusujgt Scale Chip conveyor

Condition: used, Year of construction: 2006, Control: MSX-850III Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Cgeb Eswg Egvjylkust Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: used, Year of construction: 2008, turning length: 2,000 mm, turning diameter: 520 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 250 mm, bar passage: 77 mm, workpiece weight (max.): 1,000 kg, total height: 3,300 mm, bar diameter: 77 mm, overall weight: 17,000 kg, controller manufacturer: SIEMENS, controller model: 840 D SL, center width: 2,000 mm, distance between centers: 2,000 mm, machining diameter: 520 mm, number of spindles: 1, space requirement length: 7,700 mm, space requirement width: 4,200 mm, CONTROLS .. CNC controls SIEMENS 840 D SL BASIC FUNCTIONS .. number of spindles: 1 .. live positions: yes .. number of c-axes: 1 .. number of y-axes: 1 .. number of b-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 520 mm .. turning diameter (max): 520 mm Cgeb Eylkswg Edhoujt .. bar diameter (max): 77 mm .. worpiece length max.: 2000 mm .. workpiece weight max.: 1000 kg MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. drive power S6 40%: 33 kW .. drive power S1 100%: 45 kW .. spindle torque S6 40%: 630 Nm .. c-axis: yes X/Z SLIDE .. Y-axis travel: 250 mm .. rotating range B-axis up to: 220 ° .. rapid traverse Z: 40000 mm/min .. rapid traverse X: 30000 mm/min .. rapid traverse Y: 15000 mm/min .. tool fixture: Milling Spindle .. number of tool positions (total): 80 .. number of live positions: 80 .. - rotation speeds (max): 9000 /min X SLIDE .. X-axis travel: 600 mm TAILSTOCK .. distance betw. centers (max): 2000 mm STEADY .. design: offen .. diameter (min): 45 mm .. diameter (max): 310 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 7700 mm .. space requirements -front/back-: 4200 mm .. total height: 3300 mm .. total weight approx.: 17000 kg ATTACHMENTS (TURNING) .. self-centering chuck: 1 .. - clamping diameter: 340 mm .. tailstock: optional .. steadies (number): 1 .. chip conveyor: yes .. coolant unit: yes .. aspiration unit: yes .. hydraulic system: yes .. European CE standards: yes Equipment: - 3-jaw Autoblok 340-117 chuck Machines in good condition and still in operation 2023 B-axis overhauled (€50,000) 2024 SMW steady rest SR5-ZSW (45-310), almost new 2025 Rotary union replaced Operating hours: - NC program runs: 29200h - Spindle running: 22200h

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 51228, faceplate diameter: 1,400 mm, total height: 1,500 mm, rotational speed (max.): 315 rpm, Stock number 2052-06921 Machine type: Vertical Turret Lathe - Single Column Cjb Ejwf A Nrjylkusgt Make: DöRRIES-SCHARMAN Type: VCE 1600/140 Year of manufacture: 1994 Condition: Used Control type: CNC Storage location: Schiefbahn Country of origin: Germany Delivery time: Immediately after receipt of payment Freight basis: ex warehouse - free on truck Maximum swing diameter: 1750 mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,040 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Main Drive Spindle speed range 4000 Spindle motor power 44 kW Number of axis 3 Additional Equipment Oil Mist Extraction System Workpiece Measurement with Renishaw RMP40 This 3-axis WFL M-35 mill-turn centre was manufactured in 2008. Ideal for versatile machining tasks, it combines milling and turning capabilities in one machine. Consider the opportunity to buy this WFL M-35 mill-turn centre. Contact us for more information. Application Types Milling Cgjb Eyljwgp Scskust

Condition: excellent (used), Multifix base body Size C with 6 interchangeable holders and lever (28616) 3 x CD 45 x 170 1 x CD 32 x 170 1 x CD 32 x 150 1 x MK 5 Weight 34.5 kg Cjb Eyljwf Afgjkuogt