Condition: used, Year of construction: 2003, A one owner and well maintained 2003 built Fanuc RoboDrill T21iD with Fanuc 16iMB control, BT30 10,000RPM Spindle, 21 Tool ATC, Nikken 4th Axis Head, Zero Point sub plate, machine vice & coolant equipment. Very clean machine! Specification: X Axis Travel 500 mm Y Axis Travel 400mm Z Axis Travel 350mm Table Size 650 x 400mm Table Load 250 Kgs Nsdpexqdvuofx Agzolh Spindle Taper BT-30 Max. Speed 10,000RPM Motor Power 7.5 KW ATC Tool Capacity 21 stations CNC Control Fanuc 16i-MB Rapid Traverse 54 m/min Machine Weight Approximately 2,000 kg Control: Fanuc 16i MB Spec: Travels 500mm x 400mm x 330mm 10,000 RPM Accessories: Nikken 4th Axis Head, Zero Point sub plate, machine vice

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Radius of Arm: 1600mm Spindle Taper: MT5 Nlodpfx Asxphw Tegzsh Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING Nedpfxsxp Nfxj Agzslh FULL SET OF MANUALS

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Nledpfxexpkqco Agzoh Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Tools Number of index 30 Type of tool holder ISO 40 Additional Equipment Inner Cooling: 13 bar This 3-axis DOOSAN DNM 5700 vertical machining center was manufactured in 2022. It features a Fanuc i-Series control, a spacious 1300 x 570mm table, and a tool magazine with 30 slots. The spindle speed reaches up to 12,000 rpm, supported by inner cooling at 13 bar. Consider the opportunity to buy this DOOSAN DNM 5700 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, Nledsxp Hhdspfx Agzjh 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady.

Condition: ready for operation (used), Brand: SCULFORT MAXICAP Series Type: 380 x 5000 NR Distance between centers: 5000mm Diameter allowed above the bed: 780mm Diameter allowed above the carriage: 580mm Diameter allowed above the transverse slide: 580mm Diameter allowed in the broken: 1160mm Total width of the broken: 400mm Width of the broken in front of the plate with holes: 225mm Spindle drilled at: 80mm Spindle taper: CM 5 Taper of the tailstock: CM 5 Nljdpevn I E Esfx Agzeh Bed width: 575mm Spindle diameter at the collar: 110mm Maximum passage in the fixed steady: 380mm Maximum stroke of the transverse carriage: 600mm Maximum stroke of the orientable carriage: 200mm Maximum stroke of the tailstock quill: 250mm Motor power: 17 HP Number of steps obtained Metric: 90 Withwork: 84 Threading range Metric (mm): 0.25 to 280 Withwork (threads per inch): 0.25 to 112 Extreme values of longitudinal feeds (mm): 0.025 to 11.2 Extreme values of transverse feeds (mm): 0.012 to 5.6 Approximate weight: 4700 kgs

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Nlodpfexq Dfvox Agzjh Includes set of tools

Condition: good (used), Flexibox Lapping Machine Rotary Table Dia: 1000mm Nedpfoxphwtjx Agzslh 3 Conditioning Rings (450mm Dia) Machine Guards

Condition: used, WEBSTER BENNETT EH 48” VERTICAL BORER WITH ELEVATING RAIL MAKE WEBSTER BENNETT, MADE IN ENGLAND MODEL EH 48 TABLE SIZE 1219 mm SWING 1524 mm HEIGHT UNDER CROSS SLIDE 1156 mm CROSS SLIDE RISE & FALL 559 mm TURRET RISE & FALL 914 mm TURRET TRAVERSE 914 mm SPEED 8.6 – 192 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS Nledpfx Aoxcn Huegzsh HIGH SPEED MACHINE NEWALL 2 AXIS READOUT SET OF CHUCK JAWS

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Nlodpfx Aexn U A Hsgzoh Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Nlodjxpw Rvjpfx Agzoh Haas TR210 5 axis trunnion table

Condition: like new (used), Year of construction: 2020, Ficep Raz 601 (also known as Nozomi) Automatic 9-axis CNC thermal coping robot Section size [min. mm]: 80x10 Section size [max. mm]: 610x450 Plasma torch [qty]: 1 Infeed length: 16 m Outfeed length: 16 m Nsdpfx Agoxq Rpnozjlh

Condition: good (used), TigerStop / TigerCalvet Electronic length stop • Positioning length: 6.8 meters • Repeat accuracy: +/- 0.1 mm • Maximum positioning speed: 60 m/min Njdpsxqzawjfx Agzjlh • Can also be used as a pusher up to 80 kg • Drive: 32 mm steel-reinforced belt • Controlled via the Tiger Calvet system TigerStop 5.301, version TigerCalvet 4.6.8.7196

Condition: excellent (used), Year of construction: 2018, Model: Alpha 1550 XS Year: 2018 Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Nodoxphwaopfx Agzslh Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Machine with: Quick Change Toolpost Boring Bar attachment

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm Nlodpexp Na Nsfx Agzsh HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 8600 kg Control Unit Nsdpfx Asw Rhafogzslh Brand MAZATROL Main Drive Number of axis 3 Movement X-Axis Movement 257 mm Y-Axis Movement 152 mm Z-Axis Movement 1607 mm Additional Equipment With steadyrest This 4-axis Mazak QT Nexus 350 MY was manufactured in 2006. It features a horizontal turning machine with driven tools and milling capabilities. X-Axis travel is 257mm, Y-Axis travel is 152mm, and Z-Axis travel is 1607mm. Consider the opportunity to buy this Mazak QT Nexus 350 MY horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), travel distance Z-axis: 585 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, controller manufacturer: Mazak Fusion M640, total height: 3,546 mm, total length: 3,274 mm, total width: 8,100 mm, empty load weight: 19,000 kg, passage width: 860 mm, Paletchanger 2 tables High pressure cooling 15 bar Njdpfx Agsxqr U Ejzjlh Scrapconveyor Protectioncover in Alu synchrone tapping EIA/ ISO input Max workpiece dimensions: 3240 x 880 x 640 mm Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Number of toolholders: 40 tools Number of rotations: max 6000 rpm Number of pallets: 2x 750 x 3240mm

Condition: like new (used), Year of construction: 2017, Ficep Gemini G32 Automatic gantry CNC drilling, milling, and thermal cutting systems for large plates Plate size [max. mm]: 3100 x 8000 Plate thickness with plasma [max. mm]: 80 Plasma straight torches [max. no.]: 1 Plate thickness with oxy-fuel [max. mm]: 100 Oxy-fuel torches [max. no.]: 2 Drilling heads [no.]: 1 Drilling tools per head [no.]: 8 Drilling diameter [max. mm]: 40 Nlsdpjxq Rndsfx Agzeh Drilling thickness [max. mm]: 80 Spindle power [kW]: 15 Spindle speed [max. RPM]: 7000 Machine weight [kg]: 4500–4800

Condition: used, Year of construction: 2003, weight of the machine ca. 6,6 t control monforts control 2 centre distance 3010 mm centre height 310 mm tail stock ja Nlodsw Saibspfx Agzsh cooling ja dimensions of the machine ca. 5000-1600 mmxmmxmm spindle bore 70 mm

Condition: excellent (used), Year of construction: 2019, Model: Alpha 1460 XS Year: 2019 Swing Over Bed: 460mm Swing Over Cross Slide: 270mm Swing In Gap: 730mm Nledpfx Aoxphv Negzsh Distance Between Centres: 1500mm Spindle Speeds: To 2200 RPM (Variable) Spindle Bore: 78mm Machine With: 300mm 3 Jaw Chuck 8 Station Indexing Turret (VDI 30) Various Tooling

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L Nlsdpfx Agsxq Ht Aozeh This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1990, cutting angle 90 ° cutting length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3,0 kW Nsdpfjwgi Nhex Agzjlh weight 900 kg

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Nedpfxexq Hr Eo Agzjlh Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2005. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1988, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Please note: Njdpfx Agsvrk Ecezolh The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min Nodpfovvx Exox Agzolh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++