Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dcob Hblrjwhn Uxs Iog

Condition: excellent (used), Colchester Triumph 2000 x 30” Gap Bed Centre Lathe Height of Centres 190mm Max’ Distance Between Centres 762mm Max’ Swing over Bed 390mm Max’ Swing over Cross Slide 240mm Max’ Swing in Gap 580mm Spindle Bore 54mm Spindle Nose D16 Camlock Spindle Taper in Bush No.4 Morse Spindle Speeds 25 - 2000 rev/min Tailstock No.4 Morse Djb Hblovlw H Hor Iecg 3 Phase Electrics 7.5hp Motor Supplied with: 3 Jaw Chuck Quick Change Tool Post *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78765 Machine Serial Number: 6/0047/22041 Cost: £5,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Dcsb Hbowfdz Nolr Iog Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2018, DOOSAN PUMA GT2600 M 3-axis CNC lathe. Dsb Hbljwhbw Ter Iscg Year of construction 2018 "CE". With live tools. FANUC Numerical Control. Chip conveyor. LNS BARFEDEER QLS80 S2 loader Excellent conditions. Datasheet attached.

Condition: used, Year of construction: 2019, operating hours: 15,551 h, Functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Dsb Hbjwgm Hkslr Iocg Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: used, Year of construction: 1992, serial number 31302 control Fanuc with double spindles x turning diameter max. 600 mm x-travel 1000 mm with magazine x Dsb Hbshn T D Ielr Iocg extensive accessories ca. 100 Aufnahmen, auch angetrieben weight of the machine ca. 13 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2006, Technical Specifications – QTN-250M (Turning Length 1000 mm) Chuck Size: 10 inches Maximum Swing: 677.5 mm Standard Turning Diameter: 430 mm Maximum Machining Diameter: 633 mm Maximum Machining Capacity: 677 mm Maximum Turning Length (Z-Axis): 1000 mm Bar Capacity: 77 mm Spindle Nose: A2-8 Main Spindle Speed: 30–4000 rpm Main Spindle Motor Power (30-minute Output): 25 kW (36 HP) Maximum Main Spindle Torque: 355 Nm (36.0 kgf m) Tailstock: • Quill Type: Morse Taper No. 5 • Maximum Tailstock Travel: 1050 mm • Maximum Thrust: 12 kN (1200 kgf) Tool turret: • 12 tool positions • Tool sizes: • External turning tool: Ø40 mm Dob Hblrowfynfe Iscg • Internal turning tool: Ø20 mm • Milling drill: Ø20 mm • Milling tap: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 HP) • Maximum torque: 35 Nm (3.6 kgf m) Coolant volume: 160 liters Machine dimensions: • Width: 1780 mm • Total height: 2533 mm • Space required: approx. 4.51 m² • Machine weight: approx. 5200 kg 1x chip conveyor 1x tray Pictures coming soon

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Dsb Hjv I T Eweblr Iecg Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Machine bed: in very good condition -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x steady rests, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm Dceb Hewfpileblr Ieg -Weight: 2510 kg

Year of construction: 2001, operating hours: 26,400 h, Condition: ready for operation (used), Control Unit Brand SIEMENS Deb Hblowf Sm Hsr Ijcg Model 810 D powerline Additional Equipment Thread pitches: Metric threads (longitudinal, flat, and tapered) mm 0.1-400 This BOEHRINGER VDF DUS 560 ti was manufactured in 2001. A robust horizontal turning machine, it's ideal for training purposes. If you are looking to get high quality turning capabilities consider the BOEHRINGER VDF DUS 560 ti machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2022, 2022 Mazak QuickTurn 350MA CNC Multitasking Lathe With Mazatrol Smooth G Control Ø400mm Kitagawa B-15 3 Jaw Power Chuck. Maximum Swing Ø720mm. Standard Machining Ø276mm. Maximum Machining Ø420mm. Maximum Bar Capacity Ø102mm. Distance Between Spindle End & Turret End Face 97-1,442mm. Maximum Support Weight Chuck Work Main Spindle 650kg, Maximum Support Weight Shaft Work Main Spindle 1,000kg. Axis Travel 'X'=265mm, 'Z'=1,350mm. Rapid Traverse 'X'=30m/min, 'Z'=33m/min. Main Spindle Speed Range 35-3,300rpm (30kW Motor). Spindle Nose JIS A2-11. Maximum Milling Speed 5,000rpm (7.5kW Motor). 12 Position Turret. Tool Size (OD Turning) 25mm. Tool Size (ID Turning) 50 mm. Indexing Time (Single Step) 0.29sec, Indexing Time (Full Turn) 0.72Sec. Tailstock Centre MT5, Tailstock Travel 1,265mm, Tailstock Thrust 10,000N. S/No. 306921. Dcsb Hblrewgyxme Isg

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Dsb Hblrjwf Sfvo Iocg Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2005, operating hours: 21,000 h, Condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 2800 mm Measurements height 2100 mm Machine weight 6100 kg Control Unit Brand FANUC Main Drive Number of axis 4 Movement X-Axis Movement 260 Y-Axis Movement +/-50mm Z-Axis Movement 795 Additional Equipment Tool positions: 12 Number of driven tools: 6/12 Collet chuck: Yes Jaw chuck: Yes Subspindle: Tailstock Quill holder: NK3 Tool holder: 25x25 This 4-axis MORI SEIKI NL2500Y /700 horizontal turning machine was manufactured in 2005. Ideal for precision machining, it offers robust construction and versatility in turning and milling operations. Consider the opportunity to buy this MORI SEIKI NL2500Y /700 horizontal turning machine. Contact us for more information. Dcsbewf Snke Hblr Iog Application Types Turning

Condition: used, Dean Smith & Grace Type 1709 x 40 Lathe with Heidenhain ND7013 Touchscreen DRO Dcob Hbljwgyv Sjr Isg Ø405mm 4 Jaw Chuck. Swing Over Bed Ø432mm. Swing Over Cross Slide Ø229mm. Swing Over Gap Ø660mm. Centre Height 216mm. Distance Between Centres 1,000mm. (20) Speed Range 16-2,000rpm. Spindle Bore Ø76mm. QTC. S/No. 41238-3-79. With Coolant System, Bott 2 door Storage Cabinet With Contents Of Toolholders, Tooling & Handtools. Steel Storage Rack With 3 Faceplates, 2 Fixed Steadies, Ø305mm 3 Jaw Chuck, Ø305mm 4 Jaw Chuck. Weight 2,540kg.

Condition: excellent (used), Year of construction: 2005, Doosan S400 CNC 2 Axis Turning Centre Fanuc Oi-TC Control Djb Hbov Epzpjlr Ijcg Manufactured 2005 Tool Setting Arm 12” 3 Jaw Chuck 12 Station Turret Tail Stock Swarf Conveyor (Not photographed) Tooling as photographed. Bar Capacity 76.5mm Max Cutting Dia. 400mm Max Cutting Length 750mm Spindle Motor Power 22KW Spindle Speeds 3500rpm For sale with Jet Machinery Ltd Jet Machinery Stock No: #78861 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2022, Condition: ready for operation (used), Control Unit Brand Siemens Model SINUMERIK 840D Main Drive Spindle speed range 5000 Spindle motor power A2-6 with AC motor Main motor power 16.5 / 11 kW (100/40% ED) Number of axis 2 Movement Y-Axis Movement +/- 40 mm Workpiece Dobowf Sk So Hblr Ijcg Workpiece weight 3 kg Additional Equipment External electronic handwheel Chip tray Dividing belt conveyor Alternating speed technology cycle Technology cycle Y-Axis parting Easy Tool Monitoring technology cycle Messenger V4 This DMG MORI CLX 350 V4 horizontal turning machine was manufactured in 2022. It features a 12-station servo tool turret, a hydraulic 3-jaw chuck, and a bar capacity up to D65 mm. The machine includes a coolant system with a 5-20 bar range and a coolant spray gun. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 V4 machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2009, CMZ TB67 CNC Turning Centre Fanuc 32i-Model A Control Spindle speeds 4000 rpm 12 station turret IEMAC Barfeed Swing over bed 640mm Swing over cross slide 385mm. X/Z travels 200mm (170mm + 30mm) /400mm. Dob Hsvpg I Ujblr Iocg Bar capacity 66mm. Tailstock. Serial No.369. Year 2009 For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78848 Machine Serial Number: 380080483WX Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2001, Feeler FT-30 CNC Turning Centre 12 Station Block Turret Fanuc OTC Control 22kW Spindle Motor 10” Power Chuck Spindle Range 34-3500rpm Tail Stock (controlled by M Function) Interlocking Guards Separate Transformer Electronic Handwheel Swarf Conveyor Turret Tooling as photographed Year of Manufacture 2001 Machine Capacity: Max’ Swing over carriage 450mm Max’ Turning Dia’ 450mm Max’ Turning Length 621mm Max’ Bar Work Dia’ 75mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 3500rpm Spindle Nose A2-8 10” Chuck Dsb Hblrjvw Ax Ej Iscg Turret: Number Of Tool Stations 12 25 x 25mm tools Max’ tool 40mm Ø Turret Tooling as photographed General Dims: Machine Dims - 2920 x 1633mm Weight 5000kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78878 Machine Serial Number: TE180 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm Dceboukgaco Hblr Ijg X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001° Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Colchester Mastiff Gap Bed Centre Lathe Maximum Distance Between Centres 1000mm Maximum Swing Over Bed 535mm Maximum Swing over Gap 810mm Spindle Bore 90mm Spindle Speeds 20-1400 rev/min Motor 12.5 HP Supplied with: Dual Dials Quick Change Tool Post 3 Jaw Chuck Coolant New Digital Readout For sale with Jet Machinery Ltd Jet Machinery Stock No: #78850 Machine Serial Number: 8/0211/06270 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dcobevllk Ts Hblr Ieg Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: excellent (used), Smart & Brown 1024 Mk.2 VSL Vari Speed Drive Centre Lathe Dceb Hswfq Ehoblr Ieg 5.5” Centre Height 24” Between Centres 9 1/2” Swing Spindle Speeds 30 - 2500rpm D1-4 Spindle Nose Supplied with tooling as photographed. 415V Electrics FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78920 Machine Serial Number: N./A Cost: £5,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2006, XYZ 1340 Trainer Lathe Max’ Distance Between Centres 1000mm Max Swing over Bed 330mm Max’ Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Spindle Motor 3hp Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manufactured | 2006 415V Electrics Supplied with: Djb Hblowfn H Nsr Ijcg 3 Point Fixed Steady 2 Point Travelling Steady Jaws Tool Holders as Pictured Change Gears Lifting Bracket FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78921 Machine Serial Number: 9963 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2022, XYZ 1530VS Gap Bed Centre Lathe 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine) Manufactured & Installed 2022 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 30mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #78884 Machine Serial Number: 11008213 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dob Hblrsv Uyfqj Ijcg Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm Tailstock 10” Chuck Swarf Conveyor Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Dcob Hboukgbtjlr Iog Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Machine Serial Number: NL253120316 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1996, Harrison M550 Gap Bed Centre Lathe Max’ Distance Between Centres 3000mm Max Swing over Bed 550mm Max’ Swing over Gap 830mm Spindle Bore 104mm Spindle Speeds 18– 1400 rev/min Spindle Motor 11Kw. Tailstock MT5 Manufactured 1996 Supplied with: 3 Jaw Chuck 4 Jaw Chuck 3 Point Fixed Steady Quick Change Tool Post For sale with Jet Machinery Ltd Dceb Hblrsuy T Dbe Ieg Jet Machinery Stock No: #78822 Machine Serial Number: 5M0048 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.