Condition: like new (used), Face plate, cast iron, RÖHM make Diameter: 500 mm Through: 90 mm Dob E Uz Njwfylkewskl Mounting: DIN 55027 / KK 6 including mounting bolt Condition: very good, item appears to be unused, just dusty – sold as used! .

Condition: used, Year of construction: 2004, HARE 8 HPIT INDEXING TABLE ASSEMBLY PRESS MAKE HARE, MADE IN ENGLAND MODEL 8 HPIT Dsb E Uzswb E Tfe Nwokl YEAR 2004 STROKE LENGTH 100.0 mm CAROUSEL 6 STATIONS PLUS 6 STATION AUTOMATIC CAROUSEL 8 TONS HYDRAULIC RAM SICK LIGHT GUARDS FULL SET OF MANUALS

Condition: excellent (used), Year of construction: 2015, Twin Spindle CNC Turning Centre Goodway GTZ-2600Y Year of manufacture 2015 First installed at the end customer in 2018 Siemens 828D CNC Control 8 controlled Axes Turning diameter 250 mm. Turning length 600 mm. Main spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back Spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back spindle longitudinal travel B: 690 mm. Tool turret I 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Dksbehf T N Se E Uz Nwel Tool speeds 6000 rpm. Cross travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Vertical travel Y: +/- 50 mm (for off centre operations). Tool turret II 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X2 : 210 mm Longitudinal travel Z2: 620 mm. Complete weight approx. 11000 kg Length 4445 mm Width 2555 mm Height 2360 mm Power supply required 65 KVA Complete with: 3-jaw chuck. Hainbuch collet chuck. Renishaw tool measurement for both turrets. Tool holder package. Coolant system,. High pressure coolant pumps made by Grundfos 30 bar. Chip conveyor. LNS Alpha short bar magazine.

Year of construction: 1981, Condition: ready for operation (used), An older CNC lathe Gildemeister is available. Turning diameter: 650mm, turning length: 2000mm, control: Siemens EPM, operating hours: 73347h. Including one steady rest and one tailstock. The steady rest has a crack. Documentation available. On-site inspection is possible. Dsb E Uz Nswihz Uswekl

Condition: used, Year of construction: 2007, CNC lathe 2 axes Haas SL20THE year of production 2007 Dkob Eowg Dlks Uz Nwjl X/Z: 214.6/508 mm maximum turning diameter: 262mm maximum turning length: 508 mm Head for 12 tools VDI40 Tailstock

Year of construction: 2020, operating hours: 16,597 h, Condition: ready for operation (used), General Data Measurements width 2130 mm Measurements depth 2880 mm Measurements height 1990 mm Machine weight 7500 kg Control Unit Brand SIEMENS Model 840D-SL Main Drive Spindle speed range 5000 rpm Spindle motor power 24 kW Spindle bore Ø65 mm Number of axis 7 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Media Djb E Uzjwd Uxpe Nwjkl Main electronic connection 60 kW Additional Equipment Coolant Tank Volume: Approximately 200 liters Hydraulic Tank Volume: Approximately 120 liters Central Lubrication Unit Volume: Approximately 2 liters Operating Current (IB): 76 A Rated Current of Protection Device (IN): 80 A This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Application Types Turning

Condition: excellent (used), Passage: 120 mm Dkeb E Uz Nowfyk Hjwsl Mounting: DIN 55027 / KK 8 Diameter 625 mm

Condition: excellent (used), Year of construction: 2018, EMCOTURN E 65 SMY BigBore Siemens 3-axis CNC lathe with counter spindle and driven tools including Y-axis AND C-axes Year of manufacture 2018 30,000 operating hours Machine was used for plastics machining. Machine is in operation and can be tested. Chip conveyor has been recently overhauled. Highly efficient universal lathe for complete machining with stable and precise linear guides. State-of-the-art SINUMERIK 828D control technology with ShopTurn dialog programming. Main spindle: • A2-6" connection (DIN 55026) • Max. bar capacity ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Counter spindle: • A2-6" connection (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: 12-station IDI 30 radial tool turret with directional logic for up to 12 driven tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel range: +/-40 mm - Hollow clamping cylinder including draw tube - C-axis for main/counter spindle - Mechanical spindle brakes - Sinumerik 828D control system with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive/Ethernet - 10.4" TFT color monitor - 3D simulation, and much more - Machine light - Coolant system with 3.5 bar coolant pump - Hydraulic unit - Chip conveyor interface - Documentation SuperBigBore 95: Allows bar passage up to 95 mm instead of the standard 65 mm (main spindle). Drawbar connection: M102 x 2 Spindle connection (DIN 55026): KK8 Max. speed 3,500 rpm Max. torque 380 Nm Max. power 22 kW Max. chuck size 250 mm (315 mm) Differential pressure clamping for main and counter spindle: -Sensitive adjustment of the spindle clamping pressure -Counterpressure principle -Manually adjustable hydraulic clamping pressure analog/digital converter -Display on the machine control -Adjustment range 6-60 bar -The clamping pressure on the workpiece depends on the clamping cylinder and the clamping device Electronic handwheel Parts collecting device E65 Bar loader: EMCO SL1200 FOR E45/E65/MT45/MT65/ Dsb E Uzewf Ni Se Nwekl HT45/HT65-PM INCL. EMCO INTERFACE short bar loading magazine for the automatic feeding of bar stock with diameters from 8 to 95 mm and lengths up to 1200 mm. The loading magazine is particularly characterized by its compact footprint and ease of use. EMCO Interface included! Tool measurement Multiflow cleaning gun Chip conveyor 1200 mm: Hinged belt conveyor with ejection height of 1200 mm Suitable for: Long steel chips, chip balls, and wool shavings Dry and wet machining 14 bar high-pressure coolant system Coolant can be switched to air through the tool turret: - Programmable via M command

Condition: good (used), Year of construction: 2009, operating hours: 9,400 h, CNC lathe with C-axis, driven tools + Y-axis + handling DMG - Gildemeister CTX Alpha 500 Siemens 840D sl ShopTurn control Rotation diameter over bed: 500 mm Rotation diameter over support: 290 mm Turning diameter for shafts: 200 mm Turning length: max. 500 mm Travel distances: X 190 mm Y +/- 40 mm Z 525 mm Rapid traverse: X,Z 30,000 mm/min. Y 22,500 mm/min. Spindle nose: 150h5 Spindle bearing diameter: 100 mm Bar capacity: 51 mm Spindle drive power: 20/27 kW Spindle speed: max. 6,000 rpm Spindle torque: max. 170 Nm C-axis: C-axis 0.001° Chuck diameter: 210 mm Tool turret positions: 12 Driven tool positions: 12 Tool holder: VDI 30 Tool drive power: 5.4 kW Tool speeds: 5,000 rpm Tool torque: max. 18 Nm Automatic tailstock travel: 550 mm Automation/handling system for portal parts: Huber - 3-axis Machine weight: max. 4,650 kg Accessories: C-axis and driven tools. Y-axis for off-center milling/drilling operations. 12-position tool turret. Automatic tailstock. Chip conveyor. Tool package. Dkeberx R N Ie E Uz Nwsl Automation - HUBER 3-axis gantry parts handling system. With parts magazine. Good condition. 9400 program runtime hours. Offer number L-4860

Condition: good (used), Year of construction: 2007, Functionality: fully functional, spindle bore: 130 mm, quill diameter: 150 mm, TOS FUQ 150/14 X = 14 meters, Y (vertical) = 2200 mm, Z = 1500 mm - Spindle diameter 150 mm - Heidenhain iTNC 530 CNC (7 axes) - ATC 40 tools, ISO 50 - Chip conveyor - Spindle coolant (20 bars) - Cooling unit Dkjb E Uowic Ensz Nwjl - CNC rotary table - 5-axis milling head - 4000 rpm

Condition: used, Year of construction: 2001, Functionality: unexamined, Technical specifications: Frequency: 50 Hz Dsbowicw Dj E Uz Nwjkl Operating voltage: 400 V Rated current: 63 A Weight: 11800 kg The system is currently not connected. Pickup at our Haldensleben location Immediately available

Condition: excellent (used), Year of construction: 1975, Machine type: Lead and spindle lathe Manufacturer: MATRA Model: D10 Year of manufacture: 1975 Condition: very good Type of offer: used machine Technical data Center height: 200 / 220 mm Center width: 1600 mm Spindle bore: 52 mm Speed range: 26 - 2000 rpm Drive: 3.2 / 4.0 kW Remark: Forkardt 3-jaw wedge bar chuck Ø 200 mm with hard reversible jaws, additional 2 sets of base jaws with soft top jaws, Ideal quick-change holder with 5 inserts, coolant device, running center, drill chuck, keyless collet chuck with 26 collets Ø 2.0 - 31.0 mm, 20 square pliers 4.0 - 20 mm, 3 hexagon pliers 9-17-24 mm, running steady rest, spindle cone sleeve with tip, milling attachment for support, driver flange Ø 200 mm, various small parts, chip protection wall with chuck protection (not shown) Weight: 1500 kg Dkeb E Uz Nsu Dktzjwjl The machine is in very good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Errors, changes and prior sale reserved.

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret 3-jaw RÖHM chuck, Ø 200 mm Deb Eswfm Tbs Uz Nwekl Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Chip collection tray 5 height-adjustable machine mounts Operating manual

Condition: excellent (used), Year of construction: 2018, Tornos Multiswiss 6x32 Year of manufacture: 2018 Operating hours: 14,100 hours Dsb E Uz Nswf I Rzswskl Including various accessories

Condition: good (used), Year of construction: 2005, CNC double spindle lathe Emco Hyperturn 665 MC Plus Year of manufacture 2005 Siemens Sinumerik 840D Swing diameter over bed: 600 mm Dkjb E Uzjvpun No Nwol Swing diameter over support: 500 mm Turning diameter: max. 430 mm Turning length: max. 744 mm Distance between spindles: max. 975 mm Travel paths of the upper support: X1/Z1 280/750 mm Travel paths of the lower support: X2/Z2 205/705 mm Counter spindle longitudinal travel: Z3 750 mm Rapid traverse: X1/X2 24,000 mm/min. Z1/Z2 30,000 mm/min. C1/C2 1,000 rpm. Main spindle:: Spindle nose: DIN-55026 KK 6 Spindle bore: 73 mm Bar capacity: 65 mm Spindle drive power: 29 kW AC Spindle speeds: 0 - 5,000 rpm. Spindle torque: max. 250 Nm Spindle indexing: C 0.001° degrees Counter spindle:: Spindle nose: DIN-55026 KK 6 Spindle bearing diameter: 85 mm Spindle drive power: 17/22 kW AC Spindle speeds: 0 - 7,000 rpm. Spindle torque: max. 130 Nm Spindle indexing: C 0.001° degrees Upper tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Lower tool turret: Tool turret positions/driven: 12/12 Tool holder: VDI 30 Tool drive power: 6.7 kW Tool speeds: 0 - 4,000 rpm. Tool torque: max. 25 Nm Machine weight: approx. 7,600 kg Machine dimensions: LxWxH, approx. 3,400 x 2,550 x 2,300 mm Accessories: 6-axis, CNC double spindle, double turret, turning center. 2 x spindles with C-axis. 2 x tool turret with driven tools. Main spindle with collet chuck for 65 mm bars. Counter spindle with 3-jaw chuck. Bar loading magazine. Part catcher. Finished part conveyor. Chip conveyor. Large amount of tools included! Condition: Should be in very good condition. 2 x machines available! Offer number L-4892 + L-4893

Condition: used, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,300 mm, BLANSKO SK40 VERTICAL LATHE TURNING DIAMETER 4300 mm Djb E Uzswicz Ns Nwokl Turning height 3000 mm With left-hand coolant grinding

Condition: ready for operation (used), controller model: Siemens Sinumerik 840C, total width: 2,850 mm, total height: 2,300 mm, swing diameter over cross slide: 1,500 mm, additional equipment features: yes, Uitgerust met Shunk-klauwplaat dia 500 mm VDI-hulpmiddelen Voor het afmaken van moeilijk draaien! CNC high performance draaibanken, waarvan de sterke punten vooral duidelijk zijn bij hard draaien. Een belangrijk kenmerk van alle monfort draaibanken is de hydrostatische ronde geleider, die vrij is van slijtage en een vaste trillingsdemping heeft. Bovendien levert het op de lange termijn de beste oppervlakteresultaten voor draaien, frezen, boren en draadsnijden. Swing over bed: 720 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 320 mm Dksb E Uowda Sujz Nwsl Spindle cone: A2-11 Dia of spindle bore: 110 mm Power on the spindle: 62 kW Number of speeds: 4000 rpm Length: 5600 mm with scrap conveyor Weight: +-8500 kg Toolchanger: yes Number of tools: 12x

Condition: like new (used), Year of construction: 2023, operating hours: 320 h, Commissioning in 2024 prepared for emulsion removal of long parts main spindle extension Ø 23 mm max. headstock stroke 205 mm max. speed 8,000 rpm 6-way turning tool holder on linear slide 4-way drilling unit including drilling fixtures (front/rear) 4 driven tools for cross machining on linear slide 4 tools including drilling fixtures for rear machining with drive speed of driven tools 8,000 rpm Dkjb E Uoupi Hcjz Nwjl speed of counter spindle 9,000 rpm 7 axes bar loader IEMCA BOSS 338/32 HD

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable Dsb Ejg Rxh Io Uz Nwjkl

Condition: excellent (used), Year of construction: 1970, Functionality: fully functional, turning height: 4,000 mm, workpiece weight (max.): 100,000 kg, turning diameter over cross slide: 6,000 mm, turning diameter: 17,000 mm, feed length X-axis: 8,500 mm, faceplate diameter: 5,000 mm, Universal 5-Axis Machine (Turning, Milling) Froriep 40KE 500/600-400 Spheromill Year of construction: 1969 (modernized in 1984 and 2006) Control: Siemens 840D Milling length: 8500 mm Maximum working height: 4000 mm Maximum turning diameter: 17,000 mm Table diameter: 5000 mm Ram adjustment: -15 degrees to +90 degrees Djb E Uowhughjz Nwjkl Maximum table speed: 40 rpm (100 kW) Maximum workload: 100 tons Accessories Milling head (800 rpm / 60 kW) Universal milling head (630 rpm) Face slide for diameters up to 1000 mm Grinding equipment 90-degree angle head (630 rpm) 90 degree angle head (450 rpm) - small

Condition: good (used), Year of construction: 2012, S&T ST-40/55 VC Vertical Turning & Milling 2012 Fanuc 31i CNC Table diameter 4000 mm Turning diameter 5500 mm Dob E Uom Shcrsz Nwskl Turning height 2600 mm Table drive motor 60/75 KW Table speeds 60 rpm C-Axis 0.001° Milling spindle motor 22/26 KW Milling spindle speeds 1500 rpm 16 station tool changer Proposal Number V(K)-6833

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to. Dob Ejpviqio Uz Nwskl

Condition: excellent (used), Year of construction: 1989, Very good condition Conventional VTL for sale from end user / factory Morando (Italy) Model VS 12 Built 1989 DRO digital readout Hydraulic clamping chuck diameter 1200 mm Table load capacity max. 7.5 t (7500 kgs.) Turning diameter max. 1400 mm Turning height max. 1000 mm Left ram vertical travel 1000 mm. Swivel range +/- 25° Right ram (5 position turret) vertical travel 760 mm. Swivel range +/- 25° Table drive motor 37 KW Table speeds 4.5 - 252 rpm Conical turning Chip conveyor Chip and splash guards Weight 20 t. Deb E Uzsvy Dwze Nwskl Very good condition and can be inspected under power. Proposal Number V(K)-7032

Condition: excellent (used), Year of construction: 1991, CNC vertical lathe with tool changer Dörries Scharmann VCE 1600/140 SM Contumat 2 Year of construction 1991/retrofit Siemens 828D (retrofit) Faceplate diameter: 1,400 mm Face plate load: max. 9,000 kg Swing diameter: max. 1,750 (1,890 with open door) mm Turning diameter: max. 1,600 (1,750 currently turned) mm Turning height: max. 1,500 mm Plunger input bore: min. 340 mm Number of rams: 1 Ram cross travel: X 1,900 (+/- 950) mm ram vertical travel: Z 1,000 mm Dsb E Uzjtx Au Ho Nwjkl Cutting feeds: 0.1 - 6,000 mm/min. 0.01 - 500 mm/rev. Rapid traverse: X,Z 8,000 mm/min. Crossbeam vertical travel: 900 (9 x 100) mm Crossbeam speed: 425 mm/min. Table drive power: 69 kW Table speeds: 0 - 315 rpm. Gear stage: I 2.8 - 78.75 rpm. Gear stage: II 11.2 - 315 rpm. Torque on faceplate: max. 40,000 Nm Automatic tool changer: Tool magazine positions: 20 Tool radius: max. 200 mm Tool length: max. 675 mm Accessories: Large tool pack; Large spare parts package; Large package of clamping jaws; Full cladding; Chip conveyor; Coolant system; New coolant and flood coolant pumps. Condition: Very good condition. The mechanical condition is very good. Completely new electrics and Siemens 828D Siemens ONE system. The machine works with very high accuracy. Offer number V(K)-6899

Condition: excellent (used), Year of construction: 1995, turning height: 3,200 mm, turning diameter: 3,300 mm, feed length Z-axis: 1,700 mm, faceplate diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 2,000 rpm, year of last overhaul: 2020, CNC vertical lathe with C-axis + milling spindle Doerries Scharmann VC-3500/300 year of construction 1995 Dob E Uoqy Nmaez Nwskl Fanuc 18iTB Faceplate diameter: 3,000 mm Faceplate load: max. 50,000 kg Turning diameter: max. 3,300 mm Turning height: max. 3,200 mm Travel distances: X -2,550 / +2,550 mm Z 1,700 mm Crossbeam vertical travel: W 1,800 mm Support sleeve size: 250 x 250 mm Rapid traverse: X/Z 6,000 mm/min. Table drive power: 105 kW Table speeds: 0.6 - 110 rpm. Torque at table: max. 140,000 Nm C-axis: 0.001° Tool magazine positions: max. 27 Driven positions: max. 17 Milling spindle speeds: 10 - 2,000 rpm Milling spindle drive power: 22 kW Tool holder: BT50 Accessories: Extended + retrofitted Retrofit + update/extension 2020 Condition: Very good Offer number V(K)-6834