Condition: excellent (used), Tip height 175 mm tip width 800 mm Spindle bore 46 mm Spindle holder DIN 55022/5 Tailstock mount Creb Hoq Ixyteb T Ukeb MK 3 Speed range 31.5 - 2500 rpm Longitudinal feed 0.051 - 1.034 mm/rev Face feed 0.025 - 0.517 mm/rev Machine weight 1200 kg Machine dimensions approx. 1915 x 985 x 1355 mm

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Crob Hjwb Aqnjb T Ukeb

Condition: excellent (used), Year of construction: 2008, LZ lathe, manufacturer TOS SUS80-2750, year of manufacture 2008, completely overhauled by TOS CELAKKOVICE. Overbed diameter: 840 mm Overhead diameter: 530 mm Center length: 2750 mm Spindle speeds: 7.1-900 rpm Spindle bore: 82 mm Input in both X-Z directions Multifix tool holder size: D1 Forkardt chuck: 400 mm Faceplate: 800 mm 2 fixed steady rests and 1 with running steady Cooling system available Machine documentation available. Machine in very good condition, little used. Cjb Hb Towavx Ne Uksrb For further information, see data sheets.

Condition: used, Year of construction: 1996, operating hours: 23,960 h, Functionality: unexamined, machine/vehicle number: 1113-1833-23, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, rotational speed (min.): 4,500 rpm, total height: 2,125 mm, total length: 5,690 mm, total width: 2,900 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, tool mount: 40 mm, overall weight: 8,500 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The Boehringer VDF 180CM CNC lathe, built in 1996, is in very good and well-maintained condition, but has not been used in production for the past four years. The machine comes with extensive accessories (see photos) and can be inspected upon request at the AQUAtec Machining AG production site in the Industriepark, 6460 Altdorf, Switzerland. Cobswfgn So Hb T Ukorb

Condition: used, Year of construction: 1997, max. swing over bed 890 mm max. Turning diameter over bed 830 mm centre distance 2.000 mm control SIEMENS - 840 C main spindle bore 122 mm spindle diameter in front bearing 200 mm driven tools turning speeds 1.250 U/min CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 25 UK / 2000 equipped with a turret for driven tools and tailstock. The milling drive was overhauled in 2023. Additional equipment / extensive package of tools a.o.t.: - Centering points, - Jaw sets, - Clamping jaws, - bezel - 2x 3 jaw chuck, The machine videos from the production plant will be shared on request. The machine is in a well-maintained condition. Cjb Hb Tevn U Tis Ukorb Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 25 UK | Heynumat 25-UK | Heynumat 25 UK 2000

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Creb Hb Tevyuuqo Ukob

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Crobowbz Tus Hb T Ukjb

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Csb Hbevp Shgs T Ukerb Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: good (used), Year of construction: 1959, HESTIKA 22N Hand lever turret lathe Crjb Hb T Uorm R Duekeb

Condition: good (used), Year of construction: 1995, Parts shown by hand not come. Crebowbz Eqs Hb T Ukob Technical data are on picture.

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Crsb Hb Tjqvd Iqs Ukeb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader condition see pictures Cob Hb Teunzgre Uksrb

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, Crjb Heu Hrbfob T Ukeb The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Crjb Hbevl Ig Dj T Uksb

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm Cob Hb Tjqvd Ius Uksrb max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Crsb Hju Uh U Ijb T Ukob

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Cjb Hovfxmneb T Ukorb Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: refurbished (used), Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, Meuser lathe M 1 L 230 x 1000 Year 2021 from Meuser new Built-up Turning length 1000 mm Machine length 2380 mm Center height 230 mm Digital readout HeidenhainND 5023 Multifix B Lathe chuck 3 jaws Mint condition with documentation Crsb Hjtuqdusb T Ukeb

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Crob Hbsu Hra Ij T Ukeb Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: good (used), Technical details Turning diameter over bed: 280 mm Turning diameter over support: 170 mm Turning length: 680 Rotational speed: 40 - 1500 / 9 step rpm Csb Hb T Usq Ixqgjksrb Spindle bore: 35 mm Top slide adjustment: 150 mm Tailstock holder MK: 3 Tailstock quill stroke: 95 mm Total power requirement: 0.9 kW Machine weight approx: 410 kg Transport dimensions LxWxH: 1.6x0.8x1.4 m

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. Crjb Hb T Usvfxmhsksb The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control Fanuc 18i Main-/Counter -spindle turning speeds 6.000 U/min y-axis +/- 40 mm number of tapers in turret head 12 tool holder VDI 25 Dimensions (L x W x H) 3.838 x 820 x 1.900 mm weight of the machine 4.400 kg CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-5 with main and sub-spindle, Y-axis, turret configured for driven tools, and equipped with a bar feeder. The machine has 18.600h running hours. Scope of delivery / Accessories: Clamping devices: + 15x collets SK42 (for Hainbuch Spantop Nova) + Manual wedge bar chuck (like new) with various jaw sets (Rota-S-plus) + Various jaw sets for pneumatic chucks (Graber) Tool holders (Driven tools): + 1x double holder for main and sub-spindle + 3x axial for main spindle + 3x radial + Approx. 15x various holders for boring bars and turning tools Additional accessories: + Hydrobar bar feeder for 1.5m bars The machine is in good condition and can be inspected under power. Cob Hb Tsv Htkqj Ukerb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-5 | 42STM | 42STM5 | 42 S TM-5

Year of construction: 2007, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, Cob Heh Nhlwsb T Uksrb - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Cob Hb Tohwgn Eo Ukjrb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Year of construction: 2005, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Crob Hb T Uoh Nhltskob #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO