Year of construction: 2006, Condition: good (used), bar capacity 42 mm - three x 12 position turrets (3 x Y axis +/- 31 mm) - LNS Sprint S3 new in 2007 with rear magazine - weel tooled - Fanuc 31iTA Control Dsb Engqen Hvdkegskl

Condition: used, Functionality: fully functional, Press brake with complete accessories. Dkjb Eowgl I Tongqgsl

Condition: excellent (used), Year of construction: 2011, Manufacturer: DMG Gildemeister Type: CTX Beta 800 V4 Year of manufacture: 2011 Control: Heidenhain IT Swing diameter: 700 / Max. turning diameter: 410 / Cross travel: 300 Chuck diameter: 315 Spindle bore: ø76 Drive power 40%/100% duty cycle: 34 kW / 25 kW Speed range from-to: 5000 rpm Approx. weight: 6100 kg Equipment: Axes: X, Z, C-axis + Y-axis Driven tools: Yes, 12 driven stations Dob Engjwgmh Isqgskl Tool carrier: Sauter 12-station VDI40 turret Tailstock: Yes Automatic quill stroke: Yes Quill mount: MK5 Chip conveyor: Yes - Oil mist extraction - Reinforced Coolant pump - Schunk Rota NCD 315-115 three-jaw chuck - Y-axis +/- 60 mm (120 mm) - 4 pallets with accessories: clamping jaws, tool holders, and driven tools - Driven tools: 4 radial, 6 axial Errors excepted

Condition: excellent (used), Year of construction: 2005, CNC Turning and Milling Center MORI SEIKI NL 2500Y/700 2005 MSX 850 Control Technical Specifications: Turning diameter 275 mm Turning length 705 mm MAPPS II MSX 850 Control Swing over bed 923.8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. bar diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Dob Eowcdu Rjngqgokl Spindle bearing diameter 140 mm C-axis 0.001 ° Travel X-axis 260 mm Z-axis 795 mm Y-axis 100 (+/-) 50 mm Turret Tool positions: 12 positions Shaft height for square tool: 25 mm Shaft diameter for boring bar: max. 50 mm Turret indexing time: 0.25 sec. Speed range of driven tools: 6,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Feed rate: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse Y-axis: 10 m/min Tailstock: Tailstock travel: 564 mm Quill diameter: 80 mm Taper: MT 4 Rapid traverse 7 m/min Total power requirement: 37 kVA

Condition: good (used), Year of construction: 2010, operating hours: 685 h, Functionality: fully functional, Haas GT 20 lathe In good used condition. Year 2010 Dksb Eov E Rxcongqgel 685 cycle hours Can be loaded

Condition: good (used), Year of construction: 2008, CNC Swiss-Type Automatic Lathe Make: STAR Type: SR-20R II Year of Manufacture: 2008 with: FANUC 18i control Dksb Engqjwcl Tzogel Back machining Synchronous spindle Driven tools C-axis Parts conveyor Fire extinguishing system Chip conveyor Oil mist extraction FMB TURBO 3-36 bar feeder

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Dksb Engqowg D Eqegjl

Condition: used, Year of construction: 2006, A VL 5 oLT, built in 2006, is for sale ex-works. The machine can be inspected under power. Djb Engqjup Tizogjkl

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, WFL M30 with Promot gantry loader Djbotr Dtfo Engqgokl large tool magazine for 90 tools with turret and subspindle SIEMENS 840C Very good condition, was overhauled 10 years ago Price free loaded

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 2300 kg Control Unit Brand FANUC Model 31i B Dkob Engewdy Tloqgel Main Drive Number of axis 5 This 5-axis Goodway SW-20 swiss type turning machine was manufactured in 2013. Ideal for precision and complex machining tasks, it offers advanced capabilities for intricate parts production. Consider the opportunity to buy this Goodway SW-20 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2023, Functionality: fully functional, CNC Lathe OR (VICTOR TAICHUNG MACHINERY WORKS CO. LTD.) Vturn A200 Machine Data Year of Manufacture: 2023 Serial No.: KM1-1162 Turning Speed: Max. 7,000 rpm Control: FANUC Series 0i-TF Plus Weight: 7,000 kg Dob Eewc Ad Rongqgokl Chip Conveyor: FONGEX KM-1 The sale will be subject to an online auction with the highest bid (plus buyer's premium and VAT). Please follow the link for more photos and information.

Condition: good (used), Year of construction: 2007, CNC Swiss-Type Lathe Make: STAR Type: SR-20R II Year of Manufacture: 2007 with: FANUC 18i Control Back-End Machining Synchronous Spindle Driven Tools C-Axis Parts Conveyor Fire Extinguishing System Chip Conveyor Oil Mist Extraction FMB TURBO 3-36 Bar Loading Magazine Dkob Enswcl Thogqgsl

Condition: used, Year of construction: 2013, turning length: 1,020 mm, turning diameter: 340 mm, spindle bore: 65 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 25 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,074 mm, total height: 2,487 mm, total length: 4,371 mm, total width: 2,536 mm, overall weight: 7,500 kg, CNC Control OSP P300L-R Turning diameter 340 mm Deb Enjwa R Npsgqgekl Turning Length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3.000 R/min Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Spindle speed driven tools 45 - 4500 R/min Number of driven tools 12 x Tool Taper VDI Bar feeder LNS Alpha SL 65S If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 92,000 h, Functionality: fully functional, turning length: 1,097 mm, turning diameter over cross slide: 455 mm, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, tool mount: 40 mm, total height: 2,130 mm, total length: 5,560 mm, chuck outer diameter: 315 mm, total width: 2,400 mm, quill stroke: 120 mm, quill diameter: 120 mm, overall weight: 8,900 kg, spindle diameter: 90 mm, We would like to get rid of our CTX500 due to a new purchase. The machine was built in 2002 and has since then done 91,535 hours for our company. The CTX500 is a 2-axis universal lathe with a partial hollow clamping device and has a chip conveyor, a tailstock, a three-jaw chuck SMW KNCS-N 315 and a tool carrier with 12 stations. It is fully functional and without any restrictions as it is and has been serviced at regular intervals. If you are interested, we could inspect the machine during a viewing and carry out a test run as it is still running as a production machine and is therefore under power. A sale would be possible immediately, handover possible in week 19 2025. Here are a few more technical details about the machine: Working area: - Swing diameter over bed track cover 680 mm - Swing diameter over face guide 455 mm - Chuck diameter 250/315 mm Dsb Ejvzy Dtengqgokl - Face stroke 320 mm - Longitudinal stroke 1097 mm Headstock: - Spindle head (flat flange) 220 h5 mm - Spindle diameter in the front bearing 140 mm - Spindle bore 107 mm Main drive: - Power of the three-phase main drive 23 kW - Speed range 18-3600 rpm Tool carrier: - Number of tool stations 12 (Tool holder according to DIN 69880 (VDI 3425) - Cylinder shank diameter 40 mm - Switching time 30° 0.86 sec. 180° 1.62 sec. Tailstock: - Quill diameter 120 mm - Quill holder MK 5 - Quill stroke 120 mm - Quill force max. 1400 daN Hydraulics: - Capacity approx. 30 l - Max. pressure 80 bar - Pressure for clamping device max. 80 bar Coolant device: - Capacity approx. 220 l - Pump output 1.7 kW - Delivery rate at 6 bar 20 l/min Fresh oil lubrication: - Capacity approx. 5 l Electrical connection: - Total connected load approx. 58.5 kVA - Voltage 400 V - Frequency 50 Hz - Fuse (slow) according to VDE 0100 100 A - Permissible voltage fluctuation at 400V (+/-) 10 % Ambient conditions: - Permissible ambient temperature from +15 to +35° C - Max. relative humidity 75 % - Max Installation altitude 1000 m above sea level Weights: - Net weight of the machine without chip conveyor approx. 8700 kg - Gross weight of the machine when transported by truck approx. 8900 kg Dimensions: - Machine with chip conveyor L x W x H approx. 5560 x 2400 x 2130 mm We are of course happy to answer any further questions you may have. Please just contact us.

Condition: good (used), 5/8" six-spindle multi-spindle lathe. Pietro Cucchi integral bar loader. Pneumatically driven pickup and threader in pos. 5. Chip extractor and coolant pump. Complete set of radial and face tool holders included. Good mechanical and electrical condition. Fully operational. Dkjbev H D Uas Engqgel

Year of construction: 2022, Condition: like new (used), machine/vehicle number: 3123432 & 3123758, For sale is a Haas ST20 Y and a Haas ST30 Y, each with an automatic Haas bar feeder. Both machines have a counter spindle and an automatic chip conveyor. Both machines have a 24-tool turret. Live tools. A large collection of tools, measuring instruments, etc. is included. The total new value of the tools is approximately €50,000. These machines were newly manufactured for a customer at Haas at the end of 2022 and delivered from the USA in 2023. Unfortunately, the customer suddenly backed out, and now both machines with the bar feeders have only been set up and tested by the technicians. The test run was flawless. All invoices for the tools, etc., are available. Viewings possible at any time. Located near Stuttgart Airport. Dkjb Enewg Adfsgqgjl Please contact us if you are interested.

Condition: used, Functionality: fully functional, We offer the following 7 machines in a package: DMG Mori 2-axis universal lathe CTX 510 ecoline V3, built in 2014 DMG Mori 2-axis universal lathe CTX 510 eco V1, built in 2011 DMG 5-axis machining center ecoMill 70, built in 2015 DMG 3-axis vertical machining center DMC 1035 V, built in 2014 Ki-Heung CNC bed-type milling machine KNC-U1000, built in 2009 Dkjb Eowgc Evongqgjl Ki-Heung CNC bed-type milling machine KNC-U1050, built in 2013 Ki-Heung CNC bed-type milling machine KNC-U1250, built in 2012

Condition: excellent (used), Year of construction: 2016, Machining center Make KNUTH Type EcoMill 350 CNC Dkjb Enetiauhjgqgel

Condition: ready for operation (used), Year of construction: 2004, Available immediately from location: CNC Lathe Colchester Type Combi K 4 Year of manufacture 2004 CNC control Fanuc Series 210i-T Swing over bed 554 mm Center distance 2050 mm Swing in the gap 830 mm Swing over support 370 mm X-axis travel 290 mm Spindle bore 102 mm Djb Engjwgclioqgokl Drive power 18.5/22 kW Spindle speeds 4 – 1800 rpm Weight 5 tons Chuck, lynette, tool holder Parat with 31 inserts Price €9,750 plus VAT ex location

Condition: good (used), Year of construction: 1991, CNC lathe, Emag USC-2 Built in 1991 Center distance: 1000 mm Dkjb Enswbu A Ajgqgsl Turning diameter over bed: 600 mm Maximum spindle speed: 2800 rpm Power: 46 kW

Condition: used, Year of construction: 2001, Functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 500 mm, For sale is a cycle-controlled lathe of the Gildemeister brand and type NEF 520 K The machine is fully functional, the guides are somewhat worn but still functional Technical data: Dksb Eetrmrxjngqgel Gildemeister universal lathe NEF 520K Year of manufacture: 2001 Control: Siemens Touch Panel Rotation Ø over bed: 500mm Rotation Ø over facing slide: 290mm Face travel: 260mm Center distance: 1000mm Drive power 12 KW 1st gear stage 8 - 750 rpm 2nd gear stage 32 - 3000 rpm Quill Ø: 80mm Quill holder: MK5 Quill stroke: 180mm Three-jaw manual chuck: Ø250mm Four-jaw manual chuck: Ø250mm Tool holder: Multifix size C Fixed vice with jaws and rollers, guide Ø10 - 115 On request, loading and transport can be organized for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: excellent (used), Mazak Quick Turn Smart 200 CNC Lathe Model: Quick Turn Smart 200 Control: Mazatrol Smart Year: 2012 Djb Enjv S Hqnogqgokl Maximum Swing: 660mm Maximum Machining Dia: 350mm Maximum Bar Capacity: 65mm Maximum Machine Length: 511mm Machine with: 200mm Power Chuck Programmable Tailstock Tool Prese Arm Swarf Conveyor Hydrafeed M65 Multi Barfeed Machine Manuals

Condition: good (used), Year of construction: 1990, Functionality: fully functional, Center high 290 mm Between centers 1000 mm Swing dia over bed 580 mm Swind dia over cross slide 380 mm X travel 295 mm Travel of hand slide 135 mm Spindle speed 20-2000 rpm (21 ranges) Motor power 7,5/11 kW Dsb Engewdvmzsqgskl Spindle hole D70 mm Spindle nose DIN55027 (8-er) Tailstock sleeve MT5 Feedrate longitudinal 0,04-12 mm/rev. (120 ranges) Feedrate cross 0,02-6 mm/rev. (120 ranges) Weight cca 2860 Kgs Accessories - Steady rest - Following rest - Faceplate - 3 jaws chuck - Machine working light - Rapid feed

Condition: ready for operation (used), Spindle bore: 60 mm Swing diameter over bed: 500 mm Center length: 1000 mm Dimensions: 3100x1400x1600mm Dob Engoiqtzkjqgokl

Condition: good (used), Year of construction: 1989, Lathe, made by MAGDEBURG, type CNC 602, Year of manufacture: 1989 Technical specifications: Diameter (max.): 400 mm Drive power: 60 kW Deb Enowbu Aiogqgekl Weight, approx.: 5.5 tons Control system: Siemens Sinumatik Cross travel, approx.: 300 mm Longitudinal travel, approx.: 280 mm