Condition: excellent (used), Tip height 175 mm tip width 800 mm Spindle bore 46 mm Dolreq Ixytocb Nmocg Spindle holder DIN 55022/5 Tailstock mount MK 3 Speed range 31.5 - 2500 rpm Longitudinal feed 0.051 - 1.034 mm/rev Face feed 0.025 - 0.517 mm/rev Machine weight 1200 kg Machine dimensions approx. 1915 x 985 x 1355 mm

Condition: used, Year of construction: 2020, Hwacheon CUTEX 180BL YSMC year 2020 KOREA Control FANUC iSeries Driven Tools Y axis Subspindle 2x C axis Axis-Stroke (X / Y / Z) 220 / 110 / 580mm Spindle power kW 15 / 11 Spindle speed 4500rpm Bar capacity 65mm Main Chuck 210mm Subspindle Chuck 170mm Turret 12 (24 Positions Index) Turet BMT-55 Tool probe Renishaw Parts Catcher equipment with machine: -Bar Feeder Samsys -Chip conveyor -Coolant tank -Books machine -4 driven Tools 2/2 Dcelrcbewdhhws Nmog -8 static tool holders

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Dslrcb Nswb Aqnjmecg

Condition: excellent (used), Year of construction: 2008, LZ lathe, manufacturer TOS SUS80-2750, year of manufacture 2008, completely overhauled by TOS CELAKKOVICE. Overbed diameter: 840 mm Overhead diameter: 530 mm Center length: 2750 mm Spindle speeds: 7.1-900 rpm Spindle bore: 82 mm Input in both X-Z directions Multifix tool holder size: D1 Forkardt chuck: 400 mm Faceplate: 800 mm 2 fixed steady rests and 1 with running steady Cooling system available Machine documentation available. Delrcbswavx No Nmocg Machine in very good condition, little used. For further information, see data sheets.

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, Functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm Djlrcbowfr R Eo Nmjcg W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface

Condition: used, Year of construction: 1997, max. swing over bed 890 mm max. Turning diameter over bed 830 mm centre distance 2.000 mm control SIEMENS - 840 C main spindle bore 122 mm spindle diameter in front bearing 200 mm Dcolrcb Njvn U Tiemeg driven tools turning speeds 1.250 U/min CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 25 UK / 2000 equipped with a turret for driven tools and tailstock. The milling drive was overhauled in 2023. Additional equipment / extensive package of tools a.o.t.: - Centering points, - Jaw sets, - Clamping jaws, - bezel - 2x 3 jaw chuck, The machine videos from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 25 UK | Heynumat 25-UK | Heynumat 25 UK 2000

Year of construction: 1967, Condition: used, LatheFabr. Weipert Type W500 turning diameter 500 mm Turning length 1000 Djlrcbjh Rwkle Nmscg

Condition: new, turning length: 440 mm, turning diameter: 550 mm, Siemens system Maximum Swing Over Bed 550mm Maximum Machining Diameter 450mm Maximum Machining Length 440mm Maximum Swing Over Slide 320mm Spindle "200-A2-6 NN3020-100BTR/NN3018" Spindle speed range 0-4500rpm Spindle bore 66mm Chuck Size 8''hydraulic chuck Ballscrew Specifications X-3210-THK/Z-3210-THK Linear Guide Specifications X-35-PMI/Z-35-PMI Ballscrew Bearings X-2562/Z-2562 X-Axis Travel 510mm Z-Axis Travel 620mm Y-Axis Travel ±50mm Tailstock sleeve travels 450mm Tailstock sleeve taper MT5# X/Z Axis Rapid Traverse Speed 24/24m/min X/Z Axis Repeatability 0.003mm Power of Servo Spindle Motor 11KW Overall Dimensions 2405*1767*1740mm Weight (Approx.) 3500KG Tailstock type Servo tailstock Dcjlrowfqkwocb Nmeg Power turret BMT45Y-15-364

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Delrcbjwbz Tuo Nmecg

Condition: excellent (used), Year of construction: 2019, operating hours: 15,000 h, Functionality: fully functional, CNC lathe MAZAK QT-Compact 200MY L-SmoothC 0500U Control: Mazatrol On-time hours: 15,000h Spindle hours: 5,000h Main spindle chuck diameter: 8" Max. swing diameter: 695mm Standard machining diameter: 235mm Max. machining diameter: 340mm Max. bar diameter main spindle: 65mm Distance between spindle end and turret: 81-686mm Max. workpiece weight chuck machining including chuck main spindle: 200kg Max. workpiece weight shaft machining including chuck main spindle: 500 Main spindle Speed: 5,000 rpm Spindle nose: JIS A2-6 Spindle bore: 76mm Power: 15 kW Rated power continuous operation: 11kW max. torque: 167Nm Tailstock Delrswgah Iocb Nmecg Mount: MK5 Travel range: 565mm Max. pressing force: 5,000 N   Turret: Number of tool positions: 12 Tool cross-section: 25x25mm Boring bar diameter: 40mm Tool size drilling/milling cutter: 20mm Tap: M20 Milling spindle power: 3.7 kW AGWs speed: 4,500 rpm AGWs torque: 47Nm   Automation HALTER Load Assistant S-230-35 including 3-finger gripper, cable set, interface box

Condition: used, Year of construction: 1996, operating hours: 23,960 h, Functionality: unexamined, machine/vehicle number: 1113-1833-23, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, rotational speed (min.): 4,500 rpm, total height: 2,125 mm, total length: 5,690 mm, total width: 2,900 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, tool mount: 40 mm, overall weight: 8,500 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The Boehringer VDF 180CM CNC lathe, built in 1996, is in very good and well-maintained condition, but has not been used in production for the past four years. The machine comes with extensive accessories (see photos) and can be inspected upon request at the AQUAtec Machining AG production site in the Industriepark, 6460 Altdorf, Switzerland. Dsljwfgn Sjrcb Nmocg

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min Dcolrovp Shgecb Nmog size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Dcslrcb Nohtnu Temjg

Condition: new, spindle bore: 82 mm, turning length: 2,000 mm, turning diameter: 500 mm, Siemens 808DA system Chuck size 10''hydraulic hollow chuck Maximum swing diameter over bed 500mm Maximum swing diameter over carriage 290mm Bed guide rail width 405mm Maximum machining length 2000 Spindle speed range 45-1600rpm Spindle through hole 82mm Spindle nose A2-8 Spindle taper Metric 90# X-axis travel 295mm Z-axis travel 2000 X/Z axis rapid traverse speed 6/8m/min Tool holder type Electric tool post Number of tool positions 4 stations Tool holder size 25*25 Tailstock sleeve diameter 75mm Djljwfqkkjrcb Nmscg Tailstock sleeve travels 150mm Tailstock live center taper MT5 Main motor power 7.5KW Cooling pump power 210W Machine overall dimensions 3800*1600*2000 Net weight (approx.) 2700kg

Condition: good (used), Year of construction: 1995, Parts shown by hand not come. Dslrewbz Eqocb Nmscg Technical data are on picture.

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm Dslrceqvd Iqob Nmscg travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: like new (used), Year of construction: 1995, operating hours: 650 h, Weiler DZ 32 CNC Lathe Swing diameter over bed cover 470 mm Maximum machining length 200 mm Spindle head DIN 55026A 5 Spindle bore 35 mm Bar bore 24 mm Swing over bed 470 mm Maximum speed 8000 rpm Lathe chuck with 160 mm key bars VDI driven tools Djlrcb Nsv R Hfismjcg Siemens 820 T control system Some driven tools, some VDI holders Lathe chuck with various jaws The machine comes from a school and is in very good condition

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, Dcelrju Hrbfjcb Nmsg The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Dsljvyuuqsrcb Nmocg

Condition: good (used), Year of construction: 1959, HESTIKA 22N Hand lever turret lathe Dcslrcsrm R Dusb Nmeg

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader Dolrcbjunzgrj Nmjcg condition see pictures

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Dslju Uh U Iorcb Nmjcg

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Delrcbevl Ig Dj Nmecg

Condition: good (used), Technical details Turning diameter over bed: 280 mm Turning diameter over support: 170 mm Turning length: 680 Rotational speed: 40 - 1500 / 9 step rpm Spindle bore: 35 mm Top slide adjustment: 150 mm Tailstock holder MK: 3 Tailstock quill stroke: 95 mm Total power requirement: 0.9 kW Machine weight approx: 410 kg Transport dimensions LxWxH: 1.6x0.8x1.4 m Dcolrcbjq Ixqge Nmsg

Condition: refurbished (used), Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, Meuser lathe M 1 L 230 x 1000 Year 2021 from Meuser new Built-up Turning length 1000 mm Machine length 2380 mm Center height 230 mm Digital readout HeidenhainND 5023 Multifix B Lathe chuck 3 jaws Mint condition with documentation Dcjlrcstuqdujb Nmog