Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Crsbvswb Aqnoi A D Ijb Technical data are shown on picture.

Condition: excellent (used), Year of construction: 2008, LZ lathe, manufacturer TOS SUS80-2750, year of manufacture 2008, completely overhauled by TOS CELAKKOVICE. Overbed diameter: 840 mm Overhead diameter: 530 mm Center length: 2750 mm Spindle speeds: 7.1-900 rpm Spindle bore: 82 mm Input in both X-Z directions Multifix tool holder size: D1 Forkardt chuck: 400 mm Faceplate: 800 mm 2 fixed steady rests and 1 with running steady Cooling system available Machine documentation available. Machine in very good condition, little used. Cebvowavx Nji A D Ierb For further information, see data sheets.

Condition: used, Year of construction: 1997, max. swing over bed 890 mm max. Turning diameter over bed 830 mm centre distance 2.000 mm control SIEMENS - 840 C main spindle bore 122 mm spindle diameter in front bearing 200 mm Cjbvovn U Tisi A D Isrb driven tools turning speeds 1.250 U/min CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 25 UK / 2000 equipped with a turret for driven tools and tailstock. The milling drive was overhauled in 2023. Additional equipment / extensive package of tools a.o.t.: - Centering points, - Jaw sets, - Clamping jaws, - bezel - 2x 3 jaw chuck, The machine videos from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 25 UK | Heynumat 25-UK | Heynumat 25 UK 2000

Condition: used, Year of construction: 1996, operating hours: 23,960 h, Functionality: unexamined, machine/vehicle number: 1113-1833-23, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, rotational speed (min.): 4,500 rpm, total height: 2,125 mm, total length: 5,690 mm, total width: 2,900 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, tool mount: 40 mm, overall weight: 8,500 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The Boehringer VDF 180CM CNC lathe, built in 1996, is in very good and well-maintained condition, but has not been used in production for the past four years. The machine comes with extensive accessories (see photos) and can be inspected upon request at the AQUAtec Machining AG production site in the Industriepark, 6460 Altdorf, Switzerland. Cjbewfgn Sjvi A D Ierb

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Crobowbz Tujvi A D Iob

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation Csbvi A Dsvp Shgs Iorb company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: good (used), Year of construction: 1995, Parts shown by hand not come. Crebvjwbz Eqji A D Iob Technical data are on picture.

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 Crebvieqvd Iqj A D Iob equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500 Cebvi Aeu Hrbfs D Isrb

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. Csbvi A Dsqvd Iuj Ijrb The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. Cebvievfxmnj A D Ijrb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm Crebviou Hra Is A D Isb control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 Crobvijvfxmhj A D Iob control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control Fanuc 18i Main-/Counter -spindle turning speeds 6.000 U/min y-axis +/- 40 mm number of tapers in turret head 12 tool holder VDI 25 Dimensions (L x W x H) 3.838 x 820 x 1.900 mm weight of the machine 4.400 kg CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-5 with main and sub-spindle, Y-axis, turret configured for driven tools, and equipped with a bar feeder. The machine has 18.600h running hours. Scope of delivery / Accessories: Clamping devices: + 15x collets SK42 (for Hainbuch Spantop Nova) + Manual wedge bar chuck (like new) with various jaw sets (Rota-S-plus) + Various jaw sets for pneumatic chucks (Graber) Tool holders (Driven tools): + 1x double holder for main and sub-spindle + 3x axial for main spindle + 3x radial Cobviev Htkqs A D Isrb + Approx. 15x various holders for boring bars and turning tools Additional accessories: + Hydrobar bar feeder for 1.5m bars The machine is in good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-5 | 42STM | 42STM5 | 42 S TM-5

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. The machine only has 17.000 hours of Power-On. The machine is in good condition. Crobvi Aovzcnzj D Ieb For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Year of construction: 2005, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, Cebvjh Nhltoi A D Ierb The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Year of construction: 2007, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Csbvi A Deh Nhlwj Ijrb Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm Crjbvshwgn Eji A D Ijb travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Condition: used, Year of construction: 2000, - - - - - - - - - Cobvovnwfzsi A D Ierb - - - - - - - - - - - - - - - - - - Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, Year of construction: 2000, max. swing diameter over bed 450 mm max. turning diameter 298 mm centre distance ~ 580 mm Cjbvi A Djvr Hmve Iorb control SIEMENS 810D travel -x axis 221 mm travel -y axis 590 mm max. Spindle speed 6.000 U/min. spindle bearing diameter 85 mm spindle bore 55 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC lathe | SPINNER - TC46MC equipped with a turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 46MC | 46-MC | TC-46 | TC 46 MC

Condition: used, spindle hollow 65 mm spindle diameter in front bearing 100 mm clamping chuck diameter 165 mm max. turning diameter 200 mm max. swing diameter 420 mm turning speeds 5.000 U/min control Siemens 840 D sl CNC Turning- and Milling Center | INDEX - G200 equipped with a turret for driven tools as well as y- + B- axis. The INDEX - G200 has been overhauled by RSV-Service GmbH (including control conversion) in 2014. The machine only has 19.000 hours of Power-On. Further information: Cebvi Asvzcp Eo D Ijrb - Please note that the bar loader is not included in the scope of delivery! The machine videos from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G-200 | G 200

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm Crobsvx U A Sevi A D Iob spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Condition: used, Year of construction: 2010, swing dia. 440 mm Cebovzcplsvi A D Ierb max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control Fanuc 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: used, Year of construction: 2007, Swing over bed 923,8 mm Swing over cross slide 755 mm max. turning diameter 356 mm Max. Turning length 515 mm control MSX-850 III travel -x axis 260 mm travel -y axis -50, +50 mm travel -z axis 590 mm Cjbvevwgkrei A D Iorb travel - z axis (spindle 2) 624 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - NL1500SY / 500 equipped with main/counter spindle, b- + y- axis, a turret for driven tools and chip conveyor and loading and unloading system (alphaMAX). The machine has only 3.400h processing time hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Condition: used, Year of construction: 2008, swing over bed 923.8 mm Cebvovpr Sxei A D Ierb Swing over cross slide 755 mm max. turning length 510 mm bar capacity 65 mm control MSX-850 III main spindle speeds 5.000 U/min travel -x axis 260 mm travel -y axis 100 (+/- 50) mm travel -z axis 590 mm CNC Turning- and Milling Center | MORI SEIKI - NL2000SY / 500 equipped with main/counter spindle, y- axis, a turret for driven tools and chip conveyor Scope of delivery: + 2x diven tools horizontal + 2x driven tools vertical + 2x passive tool holders + chip conveyor + power chuck (KITAGAWA) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL2000SY500 | NL 2000 SY / 500 | NL-2000SY / 500 | NL-2000 SY / 500