Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: R2AP3901, CNC Lathe Manufacturer: EMCO Type: EMCOTURN 345-II Year of manufacture: 2003 Center height: 1160 mm Center distance: 700 mm Max. turning length: 510 mm Max. swing over bed: 430 mm Max. swing over cross slide: 210 mm Max. workpiece weight: 30 kg Work spindle: Spindle head according to DIN 5026 Size: A5 Spindle diameter in front bearing: 80 mm Spindle bore: 53 mm Max. chuck diameter: 160 mm Bar capacity: 45 mm Max. torque: 78 Nm Support: Tool system DIN 69880 Chisel cross section: 12 x VDI30 Number of bed slides: 1 Number of cross slides: 1 Cross stroke: 100 mm Longitudinal stroke: 310 mm Tailstock: Quill taper: MT4 Quill diameter: 60 mm Main spindle: 1500 rpm Cross axis (X): 3000 rpm Longitudinal axis (Z): 3000 rpm Dcelqx Ufowfda Solsg Feed rate: Longitudinal slide min./max.: 0/24000 mm/min Cross slide min./max.: 0/20000 mm/min Rapid traverse: Longitudinal: 24 m/min Cross: 20 m/min For further technical data, see images Control: SIEMENS SINUMERIK 810D With integrated C-axis in the control C-axis (rotary axis): Rotary axis resolution: 0.001 degrees Rapid traverse: 100 rpm Chip conveyor: Manufacturer: KNOLL Total dimensions: 3500 x 2100 x 2500 mm Total weight: approx. 2600 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm Dslqx Uov T Ua Hoflecg -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg

Condition: used, Functionality: fully functional, CNC Bed-Type Milling Machine Manufacturer: Fritz Heckert Type: FKrSRS Control: Heidenhain 426 Table length: 1600 mm (length 3650 x width 2980 x 3620 mm) Clamping surface: 500 x 1600 mm (width) Clamping slots: 6 Upper width: 18 Center-to-center distance: 80 mm Maximum workpiece weight: 2000 kg Adjustment travel: Longitudinal X-axis: 1210 mm Transverse Y-axis: 515 mm Vertical Z-axis: 575 mm Dolqx Ufev U A Uujljcg Rear edge of clamping table to column sliding surface: 245 - 760 mm Front edge of milling spindle to table surface: 105 - 680 mm Center of milling spindle to column sliding surface: 775 mm Number of milling spindles: 6 Tool holder: SK 50 Diameter of front milling spindle bearing 100 mm Maximum torque 210 kpm Largest cutterhead diameter for machining cast iron/steel/aluminum 200 / 200 / 250 mm Speeds 18 Range 28 - 1400 rpm Increment 1.25 Full-groove speed 90 rpm Feeds Adjustable in the x / y / z axes in increments of 1 mm/min. Set via F command 10 - 4000 mm/min. Rapid traverse 5000 m/min. Milling spindle drive power 18.5 kW Torque per feed spindle 49 Nm Operating voltage 380 V Frequency 50 Hz Total power consumption 39 kW

Condition: excellent (used), Functionality: fully functional, spindle bore: 52 mm, center height: 200 mm, turning length: 1,150 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 40 rpm, PINACHO S-90/200 precision center lathe with digital display. Condition: Fully functional Year of manufacture: 2001 Storage location: Graz Condition: Very good Delqevplw Iox Uflscg Technical specifications: Center height: 200 mm Center distance: 1150 mm Permissible diameter over guide bed: 400 mm Permissible diameter over bed offset: 600 mm Permissible diameter over longitudinal slide: 370 mm Permissible diameter over cross slide: 210 mm Bed width: 300 mm Length of offset in front of the faceplate: 160 mm Headstock: 12 spindle speeds: 40 - 2200 rpm Spindle bore: 52 mm Morse taper spindle: 4 Feed rates - longitudinal: 0.05 - 0.75 mm/rev Spindle motor: 4 kW Machine weight approx.: 1.3 t Space required approx.: 2.5 x 0.9 x 1.7 m Tailstock quill diameter: 58 mm Tailstock quill stroke: 155 mm Included: - Digital display - Tailstock - Multifix base holder - Visible turning tools - Stainless steel tray The machine is located in Graz and is in very good condition. A viewing of the machine can be arranged on-site or via video call. Contact us for further information and to schedule a viewing!

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, collet bore: 32 mm, turning length: 320 mm, turning diameter: 32 mm, total length: 2,640 mm, total height: 1,840 mm, total width: 1,400 mm, spindle speed (max.): 8,000 rpm, overall weight: 3,500 kg, rotational speed (max.): 8,000 rpm, coolant tank capacity: 16,000 ml, power: 75 kW (101.97 HP), Equipment: rotational speed infinitely variable, Doosan Puma ST32G Sliding Head CNC Lathe Machine Type: Sliding Head CNC Lathe Year: 2013 - Installed in late 2014 Control: Fanuc Series 31i - Model B Condition: Excellent Includes LNS Express 332 S2 Bar Feed LNS Swarf Conveyor Losma Mist Extractor LNS Mist Extractor(Spare) Parts Conveyor Manuals Technical Specifications Max Machining Diameter: 32mm Max Main Spindle Stroke: 320mm Max Drilling Capacity: 13mm Max Tapping Capacity: M12 x 1.75mm Max Milling Capacity: 8mm Main & Sub Spindle Speeds: 8000rpm Main Spindle Power: 7.5kW Sub Spindle Power: 3.7kW X1 Axis Travel: 114mm Z1 Axis Travel: 320mm Y Axis Travel: 404mm C1 Axis Travel: 360 deg Dcslqx Ustwy N Esflog X2 Axis Travel: 393mm Z2 Axis Travel: 343mm C2 Axis Travel: 360 deg Rapid Traverse all Axes: 32m/min Front Tool Stations: 20 Back Tool Stations: 4 Driven Tool Speeds: 8000rpm Coolant Tank Capacity: 160L HP Coolant: No Coolant Flow Rate: 200L/min Power Supply: 22Kva Machine Dimensions: 2640 x 1400 x 1840mm Machine Weight: 3500kg

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: X2S190, SPECIFICATION Distance between centres 1250mm Floor to spindle centres 1086MM Swing over bed (saddle wings) 400mm Swing over cross slide 246mm Swing in gap 858mm Gap width from faceplate 165mm Spindle bore 55mm Spindle nose Camlock D1-6 Taper in nose bush No. 4 MT Spindle speeds: Low range 1-297rpm Medium range 1-861rpm High range 1-2700rpm Tailstock quill travel 140mm Tailstock diameter 73mm Tailstock taper No. 5 MT MACHINE EQUIPPED WITH Fanuc 21iTB CNC Control Operation modes: manual, sequential, AlphaLink and ISO Dcolqxjwcz Tqj Ufljg 3 jaw chuck Parat toolpost Lighting Coolant system Enclosed guarding Manual

Condition: good (used), Year of construction: 2007, machine/vehicle number: R2EV3403, TECHNICAL DETAILS Swing over bed: 430 mm Swing over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 – 6300 rpm Spindle torque: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Drive power: 13 kW Rotary axis resolution: 0.001° Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Number of tool positions: 12 Shaft according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Dcjlqewfb Utsx Uflog Speed range: 0 – 5,000 rpm Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4,000 / 6,000 N Acceleration time: 0.1 s Positioning spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1,152 mm Height of the machine: 1,940 mm Footprint: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system tank volume: 230 liters Pump power: 0.57 kW

Condition: good (used), Year of construction: 1980, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe Dolqstvhryox Uflocg -Manufacturer: VDF Heidenreich Harbeck, lead screw lathe type V3 -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm -Spindle speeds: 19 - 2000 rpm -Key bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: A320A/2935, Accessories: Documentation Various tool holders, clamping sleeves, etc. MH 500 chip conveyor Coolant system with high-pressure pump Delowdukrsqx Uflscg CO2 fire extinguishing system Parts catcher Signal lamp Counter spindle Interface for bar loader FMB minimag 20 / 3200 "C" bar loader C-axis Hydraulic unit Collet chuck Available from approximately July-August 2025

Condition: used, Year of construction: 2008, Technical details: greates pass round over bed: 300 mm turning diameter: 150 mm turning length: 400 mm x-axis: 400 mm z-axis: 400 mm spindle motor: 7,5 kW number of spindle speeds: 8000 Upm Delqxjv A Uyls Ufljcg control: SIEMENS 840D total power requirement: 13 kW spindle passage: 32 mm CNC-hard turning lathe with workpiece handling (robot), Parts feeder and separation via a spiral conveyor, Pneumatic hollow clamping cylinder make SPINNER, Network/floppy drive/ATA card management for PCU20 Signal lamp on top of machine, red/yellow/green Spindle flushing main spindle SB/PD, Attachment for microscope to main spindle Microscope optics SB/PD Height adjustment plate Height adjustment device with CAPTO C4 Process monitoring collet device 364E standard parts stop device for spindle 32mm Intermediate plate Quick tool change system consisting of: Basic holder for linear slides with Capto C4 device Mechanical clamping force transmission, as a quick-clamping device Sister tool programming consisting of: Parameter mask for quantity preselection Automatic call of the sister tool according to the specified number of pieces Robot/loading system interface UNIROB-T hardware variant 2 Locking slide Compact robot unit from above consisting of: - FANUC 6-axis robot - Max. load capacity: 5kg - Controller unit - Teach pendant - Base frame, screwed to the side of the machine base Double gripper unit consisting of: - 1 piece of pneumatic parallel gripper for finished parts - 1 piece of vacuum gripper for raw parts in a spring-loaded design - For replaceable plunger - Vacuum ejector - Sensors - Gripper interface on the 3rd robot axis with pneumatics and electrics Turning, cleaning and blow-off station Workpiece feeding as bulk material Pallet unit with double drawer, outside the machine in the robot area - for orderly workpiece storage - Pneumatically operated drawers - Arranged one above the other - With access flap for operator protection - Holds two pallets measuring 395 x 295mm - Sensors for pallet detection Parts rejection for random samples approx. 76.300h "machine on" *

Condition: good (used), Year of construction: 2007, Pinacho CNC lathe, Rayo 180 model, built in 2007, with Fanuc control. Distance between centers: 750 mm, turning diameter: 360 mm, chuck diameter: 200 mm, bed width: 250 mm, main spindle bore: 42 mm, speed range: 100 to 4,000 rpm, motor power: 5.5 kW, automatic 8-tool turret. Djlqxev T Tvyj Uflocg

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Delqxowczcfs Uflecg Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3701, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Dcelqx Uowfb S Eofleg Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m

Condition: excellent (used), Year of construction: 2007, - Control unit FAGOR 8055 - max. turning Ø: 550 mm - max. turning length: 2000 mm - Tool turret with 8 stations - travel: X= 300, Z= 2150 mm - Quill travel: 150 mm - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: - 2 steady rests Delqott Ddrsx Uflscg - various tools

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system Dcslewag Stjqx Uflog >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand SIEMENS Model 840 D powerline Main Drive Spindle motor power 36/45 kW (100/40% ED) Tool taper HSK-63A DIN 69893 Movement Y-Axis Movement ±110 mm B-Axis Movement ±120° interpolating with hydraulic clamping Additional Equipment Integrated spindle motor ISM 90 Partial hollow clamping device (hydraulic) C-axis and spindle brake (hydraulic) Triple Hirth serration with 1° indexing Absolute, direct path measuring systems in all linear axes Coolant tank: 500 litres with lifting pump and level control Coolant cleaning with belt filter (40 μm filter fineness) Chip conveyor, discharge height 1100 V24 and Ethernet interface Optional equipment: Star turret, Lower cross slide, NC tailstock Delqxowacchs Uflocg This 7-axis Gildemeister GMX 400 linear was manufactured in 2006. A robust turn-mill centre featuring an integrated spindle motor ISM 90, it offers a turning length of 1585 mm and includes a Y-axis of ±110 mm and B-axis of ±120°. Equipped with a 60-position tool magazine and CNC control SIEMENS 840 D powerline, it represents a significant asset for precision machining. Reach out for further details regarding this turn-mill centre. Application Types Turning

Condition: ready for operation (used), Functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 266 mm, travel distance Z-axis: 787 mm, rotational speed (max.): 4,500 rpm, chuck outer diameter: 254 mm, overall weight: 4,300 kg, Hardinge Cobra 65 Control Fanuc 21T Chuck 10” Turning Length 787 mm Turning Ø 266 mm Ø above the bed 558 mm Length between centres 800 mm Turret 12station VDI Speed 4500 rpm Spindle Motor 7Kw Length x width x height 3100 x 1800 x 1850 Weight 4300 kg Dcjljwbd Iuoqx Uflog

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304372, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm Dcjlqx Uowcy S Ejflsg MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3602, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Dslewd Uudjqx Uflscg Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m

Condition: good (used), Year of construction: 1995, Max. bar diameter: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4400 rpm Turret with 6 stations Dcelev Ulizoqx Uflsg 2 longitudinal slides 2 cross slides IEMCA Bar Loader BOSS 432/32 Max. bar length: 3,200 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: W5201-184-670, turning diameter: 470 mm, spindle speed (max.): 5,000 rpm, The LB EX series CNC lathes are built to the high-performance standards set by the successful LB series, which has earned very favorable customer reviews. With new models and 66 possible configurations offering high accuracy and increased multi-tasking capabilities, the LB EX II series is the flagship 2-axis lathe in the OKUMA portfolio. Built on a high-quality box-type slant bed and a thoroughly tested thermostable design, the LB EX series is able to provide dimensional stability below Ø5µm. Together with a controlled tailstock with a ball screw drive and rapid travels in the X and Z axes (25 and 30 m/min respectively), the machines are designed with accuracy and versatility in mind. Max. turning diameter [mm] 470 Max. turning length [mm] 250, 500, 1,000, 1,300 Dcslewgcytoqx Ufleg Spindle speed [min-1] 5,000, [4,200], [2,800] Number of tools 12 Motor (VAC) [kW] 22/15, [30/22], [40,30] Features L (Turning spec.), M, W (Sub spindle), MY, MW, MYW, Gantry Loader

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Delqewbd Hqsx Ufljcg Year 2008 Control Haas Chuck 10” Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 304397, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 3-off toolholders Lighting Chuck guard Dcslqx Ufswcyy Nslsg Coolant system Rear splashguard

Condition: ready for operation (used), Functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Chuck 800 mm 2000mm between Centres Swing over bed 900 mm Swing over saddle 660 mm Dcjlswbd Dvsqx Uflog Spindle Speed 710 rpm Weight 7000 kg approx.

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304373, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Delqowcyumox Uflocg Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard