Condition: ready for operation (used), controller model: Siemens Sinumerik, total length: 7,000 mm, total width: 2,300 mm, total height: 3,300 mm, net weight: 35,000 kg, PORTAL WHEEL LATHE Siemens CNC control track wheel diameter range: 540 1400 mm axle length: max 2600 mm max track: 1435 mm max. workpiece weight: 5 tons main power: 100 kW cutting speed: max 500m/min Railset lathe / Railway lathes / Rail lathe high machining accuracy in terms of concentricity and surface quality optimal force parallelogram Deb Hev St E Esl Id Nokl measuring system for diameter and profile wear measuring system for CL+CR determination measuring system for determining the concentricity of the drive shaft measuring system for wheel and axle brake discs re-profiling of all common locomotive, passenger car and wagon wheel sets planning of axles and wheel brake discs rim processing axle processing marking groove turning Chip shredder included

Condition: good (used), Year of construction: 2016, Functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 76 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Dksb Hovx Tx Esl Id Nol Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg

Year of construction: 2007, Condition: ready for operation (used), Control Unit Brand MAZATROL Model Matrix This Mazak Integrex 200 IV S with Gantry loader was manufactured in 2007. It is a horizontal turning machine, ideal for precision tasks. Contact us for more information about this machine. Dkob Hl Idev Tq Srs Nol Application Types Turning

Condition: excellent (used), SPECIFICATIONS Swing over bed 528 Swing 370 Distance between centres 810 X Axis 290 Dob Hewbnqtsl Id Nekl Z Axis 650 Control Fanuc O-T Tool changer 1 2 Tail stock Yes Dodswbf Dkomblxx Isur Chip conveyor yes DIMENSIONS Length 3600 mm Width 1950 mm Height 1820 mm

Condition: not inspected (used), Year of construction: 2001, turning length: 1,500 mm, turning diameter: 520 mm, spindle bore: 80 mm, fagor 8055 command capacity 1500X520MM Djbevupaqo Hl Id Njkl spindle bore 80MM

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, cutting width (max.): 1,300 mm, This heavy duty turning lathe is located at a renowned Bulgarian shipbuilding company and is being replaced by a new machine from SAFOP. It is available for immediate inspection. Manufacturer: WOHLENBERG Model: UE 1400 III Center height: 750 mm Center distance: 7000 mm Swing diameter over bed: 1300 mm Swing diameter over faceplate: 550 mm Dksb Hlswg Sc Do Id Nel Swing diameter over cross slide: 1000 mm Feed rate: 60 m/min Tailstock quill taper: MK6 Z-axis travel: 7500 mm X-axis travel: 1000 mm Max. workpiece weight: 21,000 kg Tool holder: Capto, various extensions Tool magazine (number of tools): 3 Standard tool list: no Max. spindle speed: 300 rpm Power: 75 kW Condition: Very good (immediately operational)

Condition: ready for operation (used), controller model: Heidenhain Manual Plus, total length: 8,400 mm, total width: 3,550 mm, total height: 2,100 mm, net weight: 10,000 kg, swing diameter over cross slide: 5,000 mm, additional equipment features: yes, Heidenhain-besturing Spaantransportband Beschermhoezen Extra stabiel Swing over bed: 1250 mm Swing over cross-slide: 930 mm Dkob Hl Idsv St Ers Nel Dia of spindle bore: 128 mm Power on the spindle: 41 kW Number of speeds: 4 > 630 rpm Total power needed: 67 kVa Chuck: dia 1000 mm

Condition: good (used), Year of construction: 2015, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, overall weight: 6,000 kg, Equipment: rotational speed infinitely variable, Main parameters: Dkob Hl Idouqh H Rs Nsl Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: good (used), Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead and pull spindle lathe type V3 -Turning length: 1600 mm -Swivel Ø over bed: 530 mm -Turning Ø over support: 330 mm -Spindle bore: Ø 62 mm -Spindle speeds: 14 - 710 rpm see photo Dkebjrl T Uwe Hl Id Nel -Three-jaw chuck: Röhm Ø 315 mm -Tailstock mount: MK5 -Accessories: tool holder/tools see photos -Dimensions: 1100/3460/H1250 mm -Weight: 2650kg

Condition: ready for operation (used), Year of construction: 1993, Pick-up Polygonal device Threading box Chip conveyor Dkjbewd R Rbo Hl Id Nol Tube bundle and stand Miscellaneous accessories

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools MAPPS4/MSX-853 IV control system Dsb Hl Idjwg D The Njkl

Year of construction: 2001, Condition: good (used), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Deb Hl Idsk Hz Iwe Nekl YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Coolant system and chip conveyor

Condition: ready for operation (used), net weight: 54,000 kg, Portaal Wielset Draaibank middenhoogte: 630 mm spoorbreedte: 1435 mm grootste mogelijke klembare schachtlengte: 2400 mm kleinst mogelijke klembare schachtlengte: 1650 mm grootste mogelijke overspanning: dia 1100 mm kleinste mogelijke overspanningscirkel: dia 550 mm middelpunthoek: 90° max. werkstukgewicht: 3500 kg De Hegenscheidt-MFD portaalwieldraaibank is een wieldraaibank met hoge productie die eenvoudig te bedienen en onderhouden is. Het portaalontwerp zorgt ervoor dat de draaibank kan rollen op werkplaatsrails. De mechanische elementen en het aandrijfsysteem zijn ontworpen voor snijprestaties tot 32 mm² per gereedschapspost. Dit zorgt voor een korte vloer-tot-vloertijd voor haarprofilering, zelfs bij extreme wielslijtageomstandigheden. Aan elke kant van het portaaltype bed zijn de headstocks gemonteerd, met geïntegreerde drivers, centra en een hoofdaandrijfsysteem dat op elke headstock is gemonteerd. Beide headstocks zijn verplaatsbaar voor het gemak van de laad- en losfuncties. Werkbereik Bewerking van nieuwe en versleten wielstellen Wielprofielbewerking Bewerking van velgen voor vrachtwielen Uitrusting samenstelling Hoogwaardige machine die in staat is tot middelzware en zware snijdieptes Portaalbed waardoor wielstellen erdoorheen kunnen rollen Installatie van apparatuur op werkvloerniveau treinwiel draaibank - Portal radsatzdrehmaschine - portal wielset draaibank - Портальный колесотокарный станок Railset draaibank / Spoorwegdraaibanken / Raildraaibank Dkeb Hov St Hvsl Id Nsl Power on main spindle: 60 kW on each chuck Number of speeds: 9 > 180 m/min cutting speed

Year of construction: 2010, Condition: ready for operation (used), Control Unit Brand MAZATROL Model MATRIX This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Deb Hl Iswbk Tkod Njkl Application Types Turning

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 021902SA04, overall weight: 1,350 kg, Equipment: documentation/manual, The highly flexible Master 80 HF allows changeover in just 1 minute for round and polygonal profiles from 15 to 80 mm in diameter. Thanks to its innovative structure, the MASTER 80 HF can process bars from 15 to 80 mm in diameter in a single channel. The material support adjustment is automatic. The use of the front centering device allows optimal use of the loading magazine with any type of bar material, both hexagonal and square. The material pusher, which is heavier and more stable than the previous version, is radially clamped and locked by pairs of rollers. This, along with additional stabilization of the loading magazine, ensures the processing of bars from 15 to 80 mm in diameter. High Rigidity The thorough research and structural design of the Master resulted in a product with extreme torsional and longitudinal rigidity, eliminating any vibration. Front Bushing The front guide bushing also guides the bar between the loading magazine and the lathe, eliminating any vibration. Replacing the two half bushings takes less than 30 seconds. Axial Shifting Device Dksb Hl Iswdwt Ajd Nol The loading magazine features an axial shifting device that allows easy access to the lathe.

Condition: excellent (used), Year of construction: 1997, - Iemca SIR automatic loader model 25 P year 1998 - Chip conveyor Dkob Hl Ijv Ea Nqjd Nol - Threading device - Pick-up - Tool holder - Cams

Condition: good (used), DUGARD CNC LATHE FANUC CONTROL HYD CHUCK 450 MM MAX TURNING DIA 700 MM TURNING LENGTH 3500 RPM SPINDLE TOOL SETTER TAILSTOCK 77 MM BAR CAPACITY SWARF CONVEYOR 18.5 KW MOTOR Deb Hljwaa D No Id Nekl THIS MACHINE WILL BE IN STOCK SOON

Condition: good (used), Year of construction: 2007, operating hours: 45,711 h, Functionality: fully functional, machine/vehicle number: 210011, Used machine, all the time maintained by machine supplier. Still connected to electricity, pressure air, etc. Can be inspected anytime. Technical specification: Number of spindles: 6 Dsb Hevrikqel Id Nskl Max. diameter of machined bar: 18 mm Bar feeder IEMCA SIR MS18 F – 3 m bars Axes: Tool carriers: - transverse shifts (positions 1.1; 2.2; 3.1; 3.2; 4.1; 4.2; 5.1; 5.2) - max. count: 8 - axes: X 35 mm, Z 85 mm, Y 20 mm Transverse unit (position 6.0) - max. count: 1 - axes: X 35 mm, Z 85 mm Longitudinal units (position 1.2; 2.1) - max. count: 2 - axis: Z 85 mm Rear unit and drilling units - max. count: 7 - driven tools: max. 4 Scara - Robot - X-Y-Z-NC (position 6.1; 6.2) - max. count: 2 - axes: Z 85 mm, X 503 mm, Y 180 mm - X-Z-NC (position 1.2; 2.1) - max. count: 2 - axes: Z 85 mm, X 14 mm

Condition: excellent (used), Year of construction: 2020, OKUMA CNC turning Centre with Y-axis, C-axis, sub spindle and live tooling Type:LB3000 EXII Year:2020 Control:OSP-P300LA Suite Y-axis:+70mm / -50mm W-axis:800mm Dkeb Hl Ijwc Arhjd Nsl Distance between centres::1020mm Turning diameter over bed:580mm Turning diameter over cross slide:470mm Max. workpiece diameter:410mm Spindle bore:91mm Main spindle speed:4200rpm Sub-spindle speed:6000rpm Toolchanger:12atc Machine weight approx.:6850kg With automatic doors (original from the factory) With parts catcher Option extended tool data management Smoke extraction Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: good (used), Hollow clamping cylinder ZHV-S Hydraulic cylinder with passage with a maximum speed of 4000 1/min and a passage of xxmm Djb Hlolgvtve Id Njkl piston stroke (mm): xx piston diameter (mm): xx max. working pressure (bar): 40 Z/Dmax (daN): 12000 traces of use and storage available shipping costs EU on request

Condition: good (used), Year of construction: 1993, Functionality: fully functional, turning diameter over cross slide: 530 mm, turning length: 850 mm, turning diameter: 450 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 850 mm, spindle motor power: 30,000 W, total height: 1,800 mm, power: 30 kW (40.79 HP), Equipment: documentation/manual, Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, extraction, coolant pump 8 bar, chip conveyor, in good condition in relation to its age, very few spindle hours and very well maintained. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Dob Hlsvta H Ee Id Njkl We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: defective spare-parts repository (used), Year of construction: 1961, The machine is sold as defective. Dkebswdn U Ro Hl Id Nsl

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno Dksb Hjvta Rkel Id Njl We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle speed (min.): 3,800 rpm, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300MY, with E-100L control, A-turret V12 all driven VDI4-40 M-function for milling, B-turret V-8, tailstock, chip conveyor, coolant system 8 bar, MY function Y-axis, touch setter, approx. 15,500 spindle hours, built in 2004, good condition and fully functional, available immediately. Dsb Hl Ievta Nyod Njkl Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2009, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Dob Hlsvta Rdj Id Nokl Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.