Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm Djlit Tbsv I Tx Rj Aout SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: ready for operation (used), Schiess 32 DZ Type: 32DZ 300/350-325/160 Tafeldiameter: 3000 mm Maximale belasting: 44 ton Snelheid: 1 10 tpm Maximaal rotatiekoppel: 10000 kgm Vermogen: 75 kW CNC-besturing: BOSCH Horizontale verplaatsing van de gereedschapshouder vanaf het midden van de tafel: 2510 mm Verticale verplaatsing van de dwarsbalk: 1600 mm Verticale slag van de gereedschapshouder: 1600 mm Gereedschapshouder kan 30° naar links en rechts kantelen Maximale hoogte van het werkstuk: 3420 mm Maximale diameter van het werkstuk: 4020 mm Gereedschapswisselaar met 12 gereedschapsposities Djlitsv Sfnxs Tb Asut

Condition: good (used), Year of construction: 2008, Description: Takisawa Manufacturer: Takisawa Delitotrd Sro Tb Asut Type: EX-310 Turning length approx. 500 mm. Rotation diameter: approx. 260 mm. Equipment: Control: Fanuc 21i-TB Bar loader for bar length 1.5 m Tailstock Turret with 12 tool stations and driven tools. Three-jaw chuck Ø 250 mm.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m Duelitevvtpxo Tb Ajt The machine has a C-AXLE. The tool turret does NOT have a holder for driven tools Distance spindle to counter spindle = 1050mm Counter spindle: A2-6, travel 800mm, spindle Ø 105mm, torque 250 Nm Switch cabinet equipped with Rittal cooler with hinged belt chip conveyor chip tray compressed air gun Machine currently has NO lathe chuck! *

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Duolit Tbovtthie Aot Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Dujlit Tbok D Ez Is Aot Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Condition: used, Year of construction: 1991, Mazak SQT 10MS Lathe Technical Specifications: Working Area Max. Turning Diameter 230 mm Main Spindle Speed Range 35–6,000 rpm Main Drive Power 11 kW Secondary Spindle Drive Power 5.5 kW Speed Range 180–6,000 rpm Indexing 72 Positions/5° Tool Turret Number of Tool Positions 12 Live Tools Speed Range 120–3,000 rpm Drive Power 2.2 kW Travels X-Axis 160 mm Z-Axis 455 mm B-Axis 460 mm Travel Speed Feed Range X/Z-Axis 0–5,000 mm/min C-Axis 1–2,000 °/min Machine Specifications (with standard equipment) Total Power Consumption 43 kVA Machine Weight, . 3,500 kg Machine dimensions (L x W x H), approx. 2.70 x 1.70 x 1.85 m Accessories Tool presetter (MAZAK Tool Eye System) C-axis Dual foot switch for opening/closing the chuck Duslitsv Tbu De Tb Ast Chuck status feedback (open/closed) Front door lock Complete coolant system Work area lighting Documentation

Condition: ready for operation (used), net weight: 140,000 kg, Torno speciaal voor tornear ejes de turbinas / poleas grandes / rotores grandes / pistones grandes Type: DS 2000-13/IV De torno is uitgerust met 2 transversales-auto#39;s: - er is een nieuwe bank geïnstalleerd op het hoofdchassis van Torno - er is een bank op een bank van het hogere chassis en de hoofdsom van het chassis - De bank van het hogere chassis is mobiel op het hoofdchasis van de torno. Maximale lengte van de trabajo-baan in het hoofdchassis: 13 metro#39;s Maximale lengte van het trabajo-stuk op het bovenste deel van het chassis: 6,5 meter Maximale rotatie bij gebruik van het diafragma van de carro transversale hoofdsom: 4000 mm Maximale radio-giro op de bank met gebruik van transversale secundario: 2700 mm Maximale betalingslimiet op de carro transversaal: 2220 mm Distance between centers: 13 000 mm Swing over bed: 4000 mm Swing over cross-slide: 2220 mm Diametre of main spindle bore: 95 mm Duelov Sftheit Tb Aot Power on main spindle: 70 kW Max weight between centers: 100 ton

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor. Duoliotq Tnuot Tb Ajt

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 700 mm turning diameter over support: 350 mm turning length: 3000 mm center height measured in bed: 320 mm spindle bore of work spindle: 70 mm spindle speed max.: 10 - 1250 / 24 step U/min cross feed: 0,0256 ... 0,378 mm/U longitudinal feeds:: 0,064...1,025 mm/U tailstock quill adjustment:: 240 mm tailstock taper MT: MK5 total power requirement: 14,0 kW weight of the machine ca.: 5,0 t dimension machine xH: 5,1 x 1,8 x 1,6 m Travel Support: Support lengthwise=3000mm Duolit Tju Trb Asb Ajt Support transverse=400mm Tool support=220mm Tool slide can be swiveled 90° right/left Equipment: digital path measuring device Heidenhain 4-fold tool holder machine lamp Coolant device with pump Accessories: 1x steady rest open 160mm and 1x steady rest closed 400mm 3-jaw chuck Ø 335 with soft jaws 18 sets of used, soft jaws *

Condition: used, Functionality: fully functional, turning height: 4,400 mm, workpiece weight (max.): 100,000 kg, turning diameter: 6,000 mm, feed length Z-axis: 1,500 mm, rotary table diameter: 5,500 mm, Asturfeito is selling the SCHIESS 18’ VBM vertical lathe, a robust machine with the oversized dimensions characteristic of its time. Made in Germany and retrofitted in 2015, it is ideal for machining large and heavy parts. This machine is suitable for various sectors, including the metallurgical industry, general machining workshops, manufacturing of mechanical components, construction of heavy structures, and power generation. • Manufacturer: SCHIESS • Model: 18’ VBM • Platen Ø: 5500 mm Dujlitjvvkw Ts Tb Aet • Maximum Turnable Ø: 6000 mm (width between columns) • Maximum Piece Height: 4400 mm • Moving Crossbar: 3000 mm travel • RAM (Z axis): 1500 mm travel • Maximum Weight on Platen: 100 tons • Rotation Speeds: - Range I: 1-8 rpm - Range II: 5-25 rpm • Numerical Control: FAGOR 8055 • Machine Status: operational and disassembled

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 20,000 kg, turning diameter over cross slide: 2,000 mm, turning diameter: 2,600 mm, rotational speed (max.): 250 rpm, spindle speed (max.): 3,000 rpm, table load: 20,000 kg, table diameter: 2,000 mm, Equipment: rotational speed infinitely variable, TOS SKIQ 20 CNC Vertical Borer. 2009. CNC Vertical Borer with Live Tools Drilling and Milling Siemens Sinumerik 840D, ATC 15. With Tools and Renishaw Workpiece Measuring. Table diameter 2.000 mm Max. Swing up to a height of 580 mm 2.600 mm Max. Swing 2.300 mm Turning Heigth 2.200 mm Table speeds, stepless 2,5-250 rpm Table load capacity 20.000 kg Table motor 80 kW Duslitowc R Uws Tb Ajt Ram 180 x 200 mm, stroke 1.000 mm Live spindle speed 4 - 3.000 rpm Live spindle motor 28 kW

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° Dslitov S Ekyj Tb Asut T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: ready for operation (used), 3 guideway flat bed lathe - heavy duty 2 steadies are included Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm Delsv Sfr Roit Tb Aeut Swing in gap: 2000 mm Diametre of main spindle bore: 102 mm Number of speeds: 4 > 180 rpm

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. Duslit Tjtq Ifnjb Aet The main spindle bearings were replaced in 2005. Control: Siemens 840D Turning diameter: Ø 260 mm. Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Condition: used, Year of construction: 1975, Technical details: faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Headstock with faceplate and main drive 2x support Tailstock Duslitsvbhiqj Tb Ajt Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. *

Condition: good (used), Functionality: fully functional, turning diameter over cross slide: 1,810 mm, turning diameter: 2,500 mm, feed length X-axis: 6,500 mm, Asturfeito is selling the Schiess Defriess horizontal lathe, a highly reliable manual machine made in Germany. It is a machine that does not have CNC control, but that does not mean that it is a machine that cannot machine large components and equipment with a high level of precision. There are photos of two stages. When we changed workshops we decided to paint it. Data Djlisvvlgcet Tb Aout Distance between points _____6,500mm Diameter of turning over on the bench (up to 400mm) _____2,500 mm Diameter of turning over without unscrewable carriage extension (up to 1000mm)_____2,200mm Diameter of turning over on the carriage (up to 6500mm)_____1,810mm Diameter of turning over on the fixed steady rest_____900mm Main motor power_____45kW Dimensions of the lathe Length_____127 00mm Width_____300 0mm Height_____27 00mm Maximum weight of piece - approximately 12 tons Weight of the lathe - approximately 45 tons (transportable on 2 trailers) Perimeter security systems - YES Grid on the bench for work control - YES 3 x Supports for long and narrow pieces Slim - YES Soft jaws and external jaws - YES Additional 2500mm plate option - Price on request

Condition: used, Year of construction: 2005, Functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 565 mm, turning diameter: 560 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 79 mm, feed rate Y-axis: 80 m/min, chuck outer diameter: 68 mm, overall weight: 7,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Y-AXIS LIVE TOOLS CNC HEIDENHAIN Max turning length 600 mm Max turning diameter 560 mm Max turning diameter (over the slide) 565 mm Max turning diameter (over the bed) 680 mm Number of live tools 12 pcs. Max speed of live tools 4500 rpm. Feed rate on Y axis 80 mm (+40/-40 mm) Distance between axes 635 mm Max spindle diameter 250 mm Spindle speed range 25-5000rpm. Max power of the spindle 35 kW Max torque of the spindle 370 Nm Max spindle diameter 68 mm Spindle bore 79 mm Machine dimensions approx. (LxWxH) 3500x2350x3500 mm Machine weight approx. 7000 kgs EQUIPPED WITH: -Chip conveyor -Y axis -Rest Duelsr I Abxeit Tb Ast -Tailstock USED MACHINE

Condition: excellent (used), Functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Duslit Tov Tyzcsb Ajt Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: ready for operation (used), chuck outer diameter: 1,210 mm, total height: 3,140 mm, controller model: Siemens, net weight: 13,000 kg, Schiess Ø 1420 mm CNC Max turningdia -- passage: 1420 mm Duolit Tbev Sfrdj Aot Power on the spindle: 30 kW Long: 2550 mm Wide: 2900 mm

Condition: used, Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 General description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t Duslijtrdlast Tb Ajt A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection.

Condition: used, Functionality: fully functional, machine/vehicle number: 51294, Mazak QT-20-U CNC Lathe (CNC Lathe) Djlit Towf E S Njb Aeut

Condition: ready for operation (used), chuck outer diameter: 3,000 mm, net weight: 48,000 kg, Type: SC 33 - Morando-licentie Tafeldiameter: 3000 mm Maximale zwenking: 3300 mm Maximale werkstukhoogte: 2300 mm Maximale belasting op tafel: 18 ton Vermogen op tafel: 60 kW Tafelsnelheid: 1,02 92 tpm 1e VERTICALE STEUNEN Ramsectie: 236 x 230 mm Verticale beweging van de steun: 1500 mm 2d VERTICALE STEUN met torentje - 5 posities Verticale beweging van de steun: 1000 mm Max turningdia -- passage: 3300 mm Power on the spindle: 60 kW Digital screen: Axom Evolution 3 Number of speeds: 1,02 > 92 rpm Duslisv Sfrqet Tb Aot

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t Djlstpu Szeit Tb Aout The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: ready for operation (used), WWDK 80 Dolit Tbev Sft Io Aout heavy duty lathe with 3 guideways max workpiece weight: 100 ton Distance between centers: 7500 mm Swing over bed: 1900 mm Swing over cross-slide: 1650 mm Power on main spindle: 150 HP Max weight between centers: 100 ton