Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m Cgob Etqsvuk Iis Auet permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1985, Functionality: fully functional, drop-through hole in table: 1,500,700 mm, table length: 1,400 mm, table width: 500 mm, pressing force: 100 t, stroke adjustment: 20,100 mm, overall weight: 22,000 kg, DGUV certified until: 05/2026, Raster HR 100-1400 automatic punching machine with Kohler roller feed Tie-rod construction High-quality solid cast iron construction Hydraulic overload protection Stroke height 20-100 mm Ram adjustment 60 mm Speed 15-80 rpm S7 control system, built in 2003 Cgobjwg Ag Ho Etq Auet Available with Kohler belt conveyor, straightener, and washing machine upon request

Condition: good (used), Functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , Ceb Eswc Ntxjtq Aujgt . new UVV-tested .

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, Cgob Etqovcrmve Aujt • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec Cgob Ejdyynvetq Auot return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: used, Year of construction: 2021, Double-column eccentric press with 1 connecting rod Make: Sangiacomo Type: T-75 DM-SBV Serial No.: 7V236 Year of manufacture: NEW (2021) as a complete system - see photos Cob Eswgcnwotq Aujgt Purchased new on June 15, 2021 Invoice available New price: €227,640.00 Including conveyor system Viewing possible by appointment LOCATION: 58285 Gevelsberg THE SYSTEM IS STILL IN OPERATION AND MUST BE COLLECTED BY THE BUYER IN 58285 Gevelsberg You are welcome to send me a quote including net prices. Sale by order. VAT deductible MFG

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Cgob Etq Asvuudzeust Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Condition: used, Year of construction: 1976, Functionality: fully functional, total height: 4,900 mm, pressing force: 400 t, table width: 2,500 mm, table length: 1,600 mm, table height above floor: 800 mm, overall weight: 41,000 kg, Equipment: safety light barrier, Exner Press Type: P400 Year of Construction: 1976 Machine Specifications: Press Force: 4000 N Rapid Traverse Speed: 0-100 mm/sec. Load Speed: 0-16 mm/sec. Load Speed: 0-100 mm/sec. Front column clearance: 2500 mm Installation height: 1500 mm Table width: 2500 mm Table depth: 1600 mm Table height above floor: 800 mm Machine width: 3200 mm Machine height: approx. 4900 mm Machine weight: 41,000 kg Drive: 37 + 3 kW Die cushion pressure: 1000 N Die cushion stroke: 250 mm Die cushion width: 1500 mm Die cushion depth: 1150 mm Quill diameter: 40 mm Cob Etq Ajwga Nxeuogt PTC control cabinet with Pilz PNOZmulti PLC safety controller from 2013 Transport not included in the price

Condition: good (used), Type DO 3 Machine No. 3492 Csb Etqswc Ntfs Auegt Force 20 kN Stroke 39 mm

Condition: good (used), Year of construction: 2009, Functionality: fully functional, ram adjustment: 110 mm, table width: 750 mm, table length: 1,250 mm, installation height: 460 mm, overall weight: 14,000 kg, DGUV certified until: 05/2025, pressing force: 160 t, Equipment: documentation/manual, safety light barrier, Hello, Cgeb Etqewf Hy Io Aujt We are selling our C-frame eccentric press from Beutler Nova (Schuler) with a press force of 1,600 kN and a P&A straightener. The press is equipped with a Zehnder & Sommer roller feed (280 x 3 mm). Semi-automatic stroke adjustable from 12 to 160 mm Motorized ram adjustment: 110 mm Year of manufacture: 2009 Condition: perfect functioning The machine must be disassembled by the buyer. If you are interested or have any questions, we look forward to hearing from you!

Condition: used, Year of construction: 2021, Functionality: fully functional, pressing force: 500 t, Hydraulic 500 T Gantry Straightening Press with tool clamping device and parallel support for the bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec Ceb Etqewgakvj Auogt c) Table size 2000 x 850 mm d) Open height 1500 mm e) Overall size approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table with grid design i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary dial k) Table moves hydraulically outward 700 mm for loading l) Cylinder moves left and right via racks m) Machine body powder-coated or double-coated n) T-slots according to customer requirements o) Cylinder induction-hardened p) Assembly, commissioning, and instruction are charged separately. Press type: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 Forces Max. press force: 5,000 kN Max. free tear-off force: 800 kN Pressure build-up time: Closed tool, steel on steel: Max. 3 seconds Dimensions Max. opening width: 1,500 mm Stroke and min. opening: 1,300 mm/200 mm Table height above floor: approx. 850 mm Height above floor (overhead height): approx. 4,300 mm Hall height: min. 5,000 mm Deflection Determined at max. closing force with 70% occupancy: < = 1.2 mm/m Weight Total weight of the press without operating materials and table top: approx. 25 t Speeds Quick closing with 17 mm sec. Pressing speed at F max.

Year of construction: 1997, Condition: not inspected (used), 15-ton pre-sale press Cgob Etq Aswgpg Heuet

Condition: used, Year of construction: 2011, pressure 620 t distance between columns 2250 mm stroke 1250 mm Distance table/ram, max. stroke up, adjustment up 1600 mm table surface area 2200 x 1280 mm ram surface 2200 x 1500 mm table height over floor 800 / 1000 mm column travel -side 750 mm feed down 10 - 250 mm/sec feed up 10 - 500 mm/sec working feed 1 - 24 mm/sec Cgsb Etq Asvuudheujt oil volume 2000 l power capacity 45,0 + kW weight 42,0 t Dimensions (WxDxH) 3,7 x 2,6 x 6,8 m year of manufacture 1997 - overhaul 2011 permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, two-hand operation no foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - video at seller's site before dismantling available

Condition: good (used), Functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Cgeb Etsumk Nasq Auot Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp

Condition: used, table length: 1,000 mm, table width: 1,000 mm, installation height: 2,000 mm, overall weight: 3,500 kg, stand width: 1,260 mm, input voltage: 400 V, Offered is an older, but functional 4-column press. (Condition as shown in the pictures.) The lifting table moves from the bottom to the top. Unfortunately, the pressing force is unknown, and it's not stated anywhere. However, due to the robustness of this press, it is likely to be in the tens of tons. Dimensions: Height approx. 2000mm Table size approx. 1000x1000mm Cgjb Etq Ajv Nv Rxjust Max. distance between upper and lower platen approx. 460mm Height from floor to lower platen (floor height) approx. 1090mm Width approx. 1260mm Weight: Press stand estimated at 3000-3500 kg Weight: Hydraulic unit estimated at 500 kg Shipping conditions: EXW We can assist with loading; a suitable forklift is available. We are also happy to recommend a freight forwarder; please contact us. The buyer/operator is responsible for the operational safety of the machine. As is usual with used machines, any warranty (liability for material defects) is excluded. All information is provided to the best of our knowledge and belief. We reserve the right to make errors.

Condition: used, Functionality: fully functional, We offer various older eccentric presses, some with feed. One of the presses is equipped with a spring assembly. Notes: Price: Negotiable Sale only to self-collectors Cgsb Etsvkb Avjq Aust Sale exclusively as spare parts donor, without guarantee If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, machine/vehicle number: P 54372/04, Capacity: 40 ton Throat depth: 225 mm Ram stroke: 4 - 100 mm Slide adjustment: 85 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 640 x 450 mm Slide area: 430 x 240 mm Number of strokes: 130 s.p.m. Required power: kW Dimensions L x W x H: 1200 x 1680 x 2160 mm Weight of machine approx.: 3,1 ton Cjb Eouqd N Ujtq Auegt Standard configuration mechanical overload protectionManual connecting rod clampingManual ram adjustment Manual stroke adjustmentManual table height adjustment Extended machine accessories Decoiler HR 10 - 320 - Year of construction 2004Coil weight 1,000 kgCoil outer diameter 1300 mmSpreading range 380 - 530 mmMaterial width max. 320 mmRoll feeder EVM 320 - year of construction 2005Coil width 320 mmMaterial thickness 3 mmCross-section 500 mm2 Automation Decoiler HR 10 - 320 - Year of construction 2004Coil weight 1,000 kgCoil outer diameter 1300 mmSpreading range 380 - 530 mmMaterial width max. 320 mmRoll feeder EVM 320 - year of construction 2005Coil width 320 mmMaterial thickness 3 mmCross-section 500 mm2

Condition: good (used), TABLE PRESS WITH POWER UNIT Ceb Etqek Adfno Aujgt

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm Cob Eovuuaiotq Ausgt table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Year of construction: 1991, overall weight: 14,000 kg, pressing force: 250 t, year of last overhaul: 2015, controller manufacturer: BECKHOFF, lifting height: 67 mm, ram stroke: 67 mm, table length: 560 mm, CONTROLS .. PLC BECKHOFF PRESS DESIGN .. drive system: knuckle-joint .. feedstock transport direction: left to right SLIDE .. total force (nominal): 250 to .. stroke: 67 mm .. stroke rate (max.): 80 /min COUNTER RAM .. nominal force: 125 to V-RING .. nominal force: 125 to TOOL DIMENSIONS .. lower table (left-right): 560 mm .. lower table (front-back): 600 mm .. upper table (left-right): 560 mm .. upper table (front-back): 560 mm STRIP-FEEDER .. feeder type: roll feeder DIMENSIONS / WEIGHTS .. total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS- Cgeb Etswcgnmeq Auot .. decoiler: optional .. waste cutter: yes + Control system completely renewed in 2015

Condition: used, Year of construction: 2016, pressure 80 t Cjb Etqjwgny Se Auegt stroke 8 - 140 mm table surface area 900 x 620 mm dayligth max. u. T. 345 mm ram adjustment 100 mm strokes - infinitely variable 60 Hub/min rated current 16 A power 400 / 50 V / Hz. weight of the machine ca. 7,6 t dimensions of the machine ca. LxBxH 1,8 x 1,7 x 2,5 m - with clamping plate - leveling elements (4 pieces) - jack as ram lifting device - foot switch - belt transmission - hydraulic clutch

Condition: used, Year of construction: 1990, pressure 200 t distance between columns 1400 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1300 x 1100 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 700 x 700 mm capacity of ejector in ram 10 t ejector stroke in ram 50 mm table height over floor 930 mm side window 770 mm ram surface 1300 x 1100 mm speed down 400 mm/s Cgobevut T Ie Etq Auot speed up 410 mm/s working speed 20 - 50 mm/s return capacity 30 t oil volume 1350 l power requirement 70,0 kW weight 23,0 t dimensions (WxDxH) 4,5 x 3,0 x 3,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, controllable dependent on pressure/time and way, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Cebsvut Hnj Etq Auogt Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation Video of 'sister maschine' available Cgobjvuk Eus Etq Auot

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) Cgjb Etovut D Tjq Auet with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F