Condition: excellent (used), Functionality: fully functional, pressing force: 160 t, table width: 1,000 mm, table length: 1,000 mm, overall weight: 20,000 kg, Equipment: safety light barrier, Press Müller 160 T A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Cgsbu Ssv Hpuls Tlrot Press Müller 160 T A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 2023, Condition: new, Pressing force 150to Cgsbu S Tokyu Hvslrot Siemens PLC hydraulics Bosch/Rexroth stroke 400mm table area 600mm x 800mm

Condition: ready for operation (used), Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible. Cobu S Tlswaa E Herogt

Condition: excellent (used), Year of construction: 1990, total height: 34,500 mm, installation height: 800 mm, total width: 12,500 mm, total length: 22,000 mm, throat depth: 800 mm, pressing force: 160 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 7,000 kg, reverse speed: 125 mm/s, ram plate width: 700 mm, ram plate length: 450 mm, ram stroke: 500 mm, type of input current: three-phase, operating pressure: 160 bar, pressure: 250 bar, oil tank capacity: 500 l, power: 17 kW (23.11 HP), PYE 160 S/1M hydraulic press. Year of production 1990, manufacturer VEB Wema Zeulenroda (Germany). Machine after a general overhaul. Parameters: Maximum pressing force 160 tons. Working pressure 16 MPa. Upper table 700 x 450 mm. Lower table 900 x 630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Cgsbuoqy E I Rj S Tlrot Upward speed 125 mm/sec. Power requirement 17 kW. Oil quantity in the tank 500 l. Weight 7000kg. Height 3450mm, length 2200mm, width 1250mm. Machine in very good condition. It is possible to make a visual inspection and check the machine in motion.

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg Cgsbu S Tljv U Nm Doret MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Csbu Sov T T Sbe Tlrsgt Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons Price: €6,000 plus VAT, ex location

Condition: excellent (used), Year of construction: 1959, Functionality: fully functional, pressing force: 650 t, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, ram stroke: 400 mm, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press Cgsbu Sev Hpnle Tlrjt A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1981, total height: 3,600 mm, pressing force: 160 t, table width: 600 mm, table length: 1,250 mm, overall weight: 7,500 kg, ram stroke: 500 mm, distance table to ram: 800 mm, power: 20.5 kW (27.87 HP), lifting height: 500 mm, worktable length: 1,250 mm, space requirement length: 1,250 mm, space requirement width: 2,150 mm, year of last overhaul: 2006, CONTROLS .. PLC PRESS DESIGN .. drive system: hydraulic .. frame design: C-frame, single sided .. table cushion: yes PRESS FORCES .. total force (nominal): 160 to PRESS TABLE .. table surface (left-right): 1250 mm .. table surface (front-back): 600 mm .. thickness of bolster plate: 100 mm SLIDE .. table surface (left-right): 750 mm .. table surface (front-back): 450 mm .. stroke: 500 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 200 mm/s .. return velocity max.: 250 mm/s TOOL ASSEMBLY DIMENSIONS .. distance table - slide max.: 800 mm .. throat (C-frame): 360 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 20.5 kW .. mains voltage: 380 V .. mains frequency: 50 Hz Cjbu S Teurcl Djlrsgt DIMENSIONS / WEIGHTS .. space requirements -left/right-: 1250 mm .. space requirements -front/back-: 2150 mm .. total height: 3600 mm .. total weight approx.: 7500 kg control system upgraded to SIEMENS/PILZ

Condition: excellent (used), Technical data: Number of pistons: 6 Piston diameter: 65 mm Connection to CO. Shelf dimensions: 1300x3000 mm Clearance: 400 mm Cgebu Sowbdfas Tlrjt Hydraulic pressure Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 3530 mm Width: 1470 mm Height: 2020 mm

Year of construction: 2015, Condition: ready for operation (used), Workpiece Workpiece drm over bed 1800 mm Workpiece drm over support 1400 mm This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information. Cebu S Tev Nb Rdjlrogt Application Types Bending

Condition: used, Double column eccentric press, WEINGARTEN punching machine type HD 250 Manufacturer no. 126 127, built in 1974 Ideal for overhaul and rebuilding with new electrics, mechanically in good condition Cjbu Ssv Hrune Tlregt Pressure force 250 tons. Stroke adjustment 10-100 mm Weight approx. 25 tons. Table size 1280 x 1120 mm Distance between the columns 1480 mm Side column clearance 680 mm Stroke adjustment approx. 10-100 mm Ram adjustment 120 mm Installation height with largest stroke at bottom approx. 780 mm Stroke rate 30 to 100 strokes/min. (infinitely variable) Motor power 11.5-42 kW Power supply 380 volts, 50 Hz - very precise ram guide through 8-way flat guide - 2-connecting rod design - hydraulic overload protection - pneumatic clutch-brake combination ORTLINGHAUS - electro-motor ram adjustment - manual stroke adjustment - infinitely variable stroke rate via adjustable drive motor Elektra Faurndau - adjacent electrical control cabinet (outdated, not functional) - machine for installation above ground Space requirement with platform L x W x H 4000 x 2700 x 5100 mm Space requirement without platform L x W x H 3000 x 1900 x 5100 mm Height of press stand with drive motor approx. 4900 mm Transport dimensions, press stand lying Length: 510 Width: 2000 x Height: 3000 mm Total weight approx. 25 tons. Mechanically in good condition, electrical system outdated and not working From stock 37235 Hessisch Lichtenau

Year of construction: 2007, Condition: ready for operation (used), A RUF briquetting press for the metal processing industry is available. Power: 4kW, max. specific pressure: 2800kg/cm², briquette diameter: 60mm. Machine dimensions X/Y/Z: approx. 1800mm/1700mm/2000mm, weight: approx. 1500kg, briquette counter: approx. 5 million, documentation available. On-site inspection is possible. Cgebu Sjv Uqc Hs Tlrst

Condition: excellent (used), Year of construction: 1956, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. Cgjbu S Tjv Hp T Uslrot New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1990, pressing force: 12 t, overall weight: 1,000 kg, ram stroke: 200 mm, lifting height: 200 mm, PRESS DESIGN .. drive system: hydraulic .. frame design: C-frame, single sided PRESS FORCES .. total force (nominal): 12 to Cgobu S Tljurclwsrot SLIDE .. stroke: 200 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 380 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 1000 kg Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

Condition: refurbished (used), Year of construction: 1984, Press force 400 tons Table size 2,500 x 1,500 mm Ram area 2,500 x 1,500 mm Csbuev Izwus S Tlrsgt Stroke 320 mm Ram adjustment 150 mm Installation height 1,200 mm Strokes/min 25 Machine live. In very good condition, overhauled in 2023

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 7551051722-E, total height: 3,100 mm, overall weight: 16,000 kg, total width: 4,550 mm, working width: 3,050 mm, total length: 2,400 mm, pressing force: 300 t, Machine was not used much Cebu Sev Uyuls Tlrsgt

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, pressing force: 630 t, table width: 1,800 mm, table length: 1,600 mm, overall weight: 80,000 kg, Equipment: safety light barrier, Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Cgsbusv E N Rqs S Tlrjt Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2003, installation height: 335 mm, overall weight: 11,000 kg, pressing force: 160 t, year of last overhaul: 2016, controller manufacturer: SIEMENS, controller model: S5, lifting height: 60 mm, ram stroke: 60 mm, table length: 560 mm, tool height: 335 mm, CONTROLS .. PLC SIEMENS S5 SLIDE .. total force (nominal): 160 to .. stroke: 60 mm COUNTER RAM .. nominal force: 80 to V-RING .. nominal force: 80 to TOOL DIMENSIONS .. lower table (left-right): 560 mm .. lower table (front-back): 600 mm .. upper table (left-right): 560 mm .. upper table (front-back): 600 mm .. shut height max.: 335 mm .. ram adjustment: 125 mm .. distance between columns (H-frame): 630 mm .. passline opening (free passage in side columns): 270 mm CROP SHEAR .. cutting force: 150 kN DIMENSIONS / WEIGHTS .. total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. decoiler: optional .. waste cutter: yes Cgebu S Tsurcc Nslrot .. slug separator: optional !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ball guides and guide shafts + feeder completely overhauled, motor and cable new + complete shear sealed, new carbide shear blades + Worm shaft new bearings and seals replaced 2018: new Raziol belt spraying system Optional: + double swivel reel AMT AHDR 500/1600-R

Condition: excellent (used), Year of construction: 1962, Functionality: fully functional, pressing force: 200 t, table width: 970 mm, table length: 1,600 mm, ram stroke: 800 mm, die cushion force: 40 t, year of last overhaul: 2022, Equipment: safety light barrier, Lasco FP 222 S press Cgsbusv E Efde S Tlrjt A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, pressing force: 200 t, table width: 1,000 mm, table length: 850 mm, overall weight: 17,000 kg, ram stroke: 700 mm, working height: 950 mm, Equipment: safety light barrier, Aprotech PH.200R.01 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Simatic S7 control system Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply. Cgjbjv E Eyhsu S Tlrot Aprotech PH.200R.01 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Simatic S7 control system Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Functionality: fully functional, pressing force: 150 t, table width: 1,000 mm, table length: 850 mm, Equipment: safety light barrier, SMG P 79 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Csbu Sev E Eppe Tlrjgt SMG P 79 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1959, Functionality: fully functional, table length: 1,500 mm, ram stroke: 450 mm, table width: 2,050 mm, pressing force: 400 t, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Cgjbov E Rm Hou S Tlrot Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, pressing force: 315 t, table width: 1,250 mm, table length: 900 mm, overall weight: 35,000 kg, ram stroke: 129 mm, Equipment: safety light barrier, Press Müller 21ZE 250315-12,5.13.2 A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. Cgebu S Tlov Hqavorot New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller 21ZE 250315-12,5.13.2 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, pressing force: 450 t, table width: 750 mm, table length: 600 mm, overall weight: 22,000 kg, ram stroke: 250 mm, Equipment: safety light barrier, Dieffenbacher P 04 50 A/S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Cgjbu Sjv E Nhpo Tlrot Dieffenbacher P 04 50 A/S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1973, Functionality: fully functional, pressing force: 400 t, table width: 900 mm, table length: 850 mm, overall weight: 23,000 kg, Equipment: safety light barrier, Hans Shoen UTE/B 400 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Cobu S Tsv E Rpnolrsgt Hans Shoen UTE/B 400press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.