Year of construction: 1977, Condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Dcelq Eot Nhmhjargjg

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, throat depth: 400 mm, installation height: 400 mm, pressing force: 160 t, ram stroke: 140 mm, TECHNICAL DETAILS Pressure force: 160 t Pillar stroke: 32 - 140 mm Pillar adjustment: 100 mm Stroke rate: 50 strokes/min Thrust: 400 mm Installation height: 400 mm Drawing depth: 63 mm Pressure force at maximum drawing depth: 63 t Adjustment of the ram slide: 100 mm Operating options: single stroke / continuous stroke Operation: foot and hand operation possible Dcolq Earjvyix Dsgog Table and work surfaces Table size: 1,000 x 750 mm (without clamping plates) Pillar surface: 850 x 630 mm Tenon hole: 400 x 360 mm MACHINE DETAILS Machine weight: approx. 10.5 t Machine dimensions (L x W x H): 2.9 x 1.25 x 3.3 m Electrical control cabinet (L x W x H): 1.06 x 0.6 x 2.0 m Energy and operating requirements Total power requirement: 15.5 kW Compressed air: 6 kp/cm² Oil filling: approx. 30 liters Power connection: 80A EQUIPMENT - Clamping plates with different dimensions: 1x 1,200 x 760 x 90 mm / 1x 1,200 x 760 x 70 mm - Tenon hole Ø 300 mm

Condition: used, Year of construction: 2002, hydraulic presses Machine type: Millutensil MIL 203 Year of manufacture: 2002 Djlq Earovwbz Sjgecg TECHNICAL DATA: Closing force: 1500 KN Max. opening force: 350 kn Dimensions of the plate: 2000 x 1500 mm Max. load capacity of the lower plate: 30,000 kg Maximum load capacity of the upper plate: 15,000 kg

Year of construction: 1995, Condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Dslq Earotva Dnsgscg

Condition: ready for operation (used), Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible. Dolq Earju Av D Negscg

Year of construction: 2018, Condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Djlsu Dal Hoq Eargocg

Year of construction: 2011, Condition: ready for operation (used), Two heated hydraulic presses are available. 1) Italpresse GL9-6/188, year of manufacture: 2011, press force: 300t, spec. press force: 43kg/cm², cylinder: 6, cylinder diameter: 140mm, table dimensions X/Y: 1400mm/600mm, opening height: 400mm, heating plates: electric, drive power: 5.5kW. 2) Joos HP S80, year of manufacture: 2011, pressing force: 80t, plate dimensions X/Y: 2500mm/1250mm, piston diameter: 80mm, operating pressure: approx. 385bar, spec. pressing force: 2.5daN/cm², cylinders: 4, heating: electric, machine dimensions X/Y/Z: approx. 2900mm/1500mm/2100mm, weight: approx. 3300kg. On-site inspection is possible. Dcjlsugmxpoq Eargog

Year of construction: 1993, Condition: ready for operation (used), Pressing force: 1500kN, max. stroke: 160mm, stopping time: 80ms, motor power: 7.2kW. Documentation available. On-site inspection is possible. Dcslq Eajvur Hasrgeg

Condition: ready for operation (used), Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg. Dsletxbz Eeq Eargecg

Year of construction: 1982, Condition: ready for operation (used), Stroke speed: 57-86/min, ram adjustment: 63mm, including documentation. Dcelsi Ati Njq Eargsg

Year of construction: 1995, Condition: ready for operation (used), A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible. Dolq Earouhqcbsgscg

Year of construction: 2000, Condition: ready for operation (used), A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Dcelq Eeuii Swjargjg

Year of construction: 1971, Condition: ready for operation (used), Working width: 3500mm, max. sheet thickness: 4mm, machine dimensions X/Y/Z: approx. 3800mm/1500mm/1900mm, weight: approx. 9000kg. The machine has a leak on the right cylinder. Documentation available. On-site inspection is possible. Dcjlq Easuh Az Norgjg

Condition: ready for operation (used), Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible. Dcelq Eareu N Hc Njgsg

Condition: ready for operation (used), Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible. Delqjvr Edys Eargjcg

Year of construction: 1970, Condition: ready for operation (used), Pressing force: 45t, cutting area: 1000mm², stroke adjustment: 20mm-100mm, ram adjustment: 45mm, stroke rate: 60 strokes/min, table dimensions X/Y: 730mm/500mm, opening in table: 180mm/180mm, table height: 710mm, ram area: 350mm/220mm. On-site inspection is possible. Dcjlq Eaovr Ed Hsrgsg

Year of construction: 1982, Condition: ready for operation (used), Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible. Dcolouy T H Ajq Eargsg

Year of construction: 2003, Condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Dcslq Earju Dalyogsg

Year of construction: 2003, Condition: ready for operation (used), Press force: 400t, stroke rate: 15-120/min, stroke adjustment (defective): 30mm-210mm, fixed stroke: 186mm, ram adjustment: 150mm, overall height: 350mm-576mm, max. belt width: 600mm, table dimensions X/Y: 2000mm/1400mm, shuttle tables on rails: Blue (220mm) and red (250mm), parts conveyor belt X/Y: 800mm/1800mm, dimensions X/Y: 20000mm/6000mm, operating hours: 32000h. Including conveyor system and change trolley. Documentation available. On-site inspection is possible. Dcslqjtyyn Ts Eargjg

Year of construction: 1976, Condition: ready for operation (used), Pressing force: 400t, table length: 890mm, table width: 780mm, stroke: 180mm, ram stroke: 30-300mm, ram adjustment: 125mm, stroke rate: 55/min, safety distance: 400mm, drive power: 15kW. Machine dimensions X/Y/Z: approx. 2800mm/1000mm/3000mm, weight: approx. 14000kg. Dolqougmw Se Eargocg

Year of construction: 1987, Condition: ready for operation (used), Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible. Dcjljuxdi Eoq Eargog

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Dcolst Amdreq Eargjg

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Dolq Eastia Hhjrgecg

Year of construction: 1996, Condition: ready for operation (used), Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg. Delq Earetxbzxegecg

Year of construction: 1994, Condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Dslq Earsnxk I Regecg