Year of construction: 2001, Condition: used, press capacity 148 to material Hartmetallstangen Fgsljt Hw Snen E Hgxsb quality Extrusionspressvorgang 0

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Foln Eeu Saaaj Hgxogb Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Year of construction: 1962, Condition: used, GEBA 4/B Baier hot stamping machine hot stamping press hot stamping machine Table 280 x 200 mm, ram 150 x 200 mm, table adjustment 50 mm, pressure output 4000 kP, built in 1962 Functional test: the heating plate gets warm, foot operation and button operation OK, material feed works Fslnevr Hk Uo E Hgxegb A viewing is possible by arrangement, the machine is sold as it is, no returns! Documents are not available. Forklift and crane loading possible

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm Felnot Hw E Io E Hgxsgb

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Fslsuqd Nujn E Hgxsgb Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 1966, throat ca. 300 mm stroke ca. 200 mm pressure capacity max. 35 t die cushion hydr. pressure/stroke 15 t total power requirement 5,6 kW Fgolnsvr Hkuj E Hgxeb weight of the machine ca. ca 2,5 t dimensions of the machine ca. 1 x 0,9 x H 2,4 m m

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm Fgsln E Hot Hw Ezegxsb total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: used, machine/vehicle number: H84 - 1331, Press capacity: 16 ton Throat depth: 250 mm Stroke: 300 mm Daylight: 600 mm Table surface area : 553 x 368 mm Approach speed: 121 mm / sec Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW Fjlou Iuk Esn E Hgxegb

Condition: used, Year of construction: 1970, pressure 180 t Fgoln E Hgjvr Hknexsb dimensions of the machine ca. 2 x 1,5 x 2 m strokes per minute 60 total power requirement 3 kW weight of the machine ca. 4 t

Condition: used, Year of construction: 1971, pressure 200 t Fjln E Het Hw Dwegxogb passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Feln E Houqd S Aogxsgb Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 2017, stroke 175 mm Fgoln Ejvr Hkbe Hgxsb

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm Fjln E Hgst Hw Amoxsgb stroke 200 mm total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: used, Year of construction: 2007, machine/vehicle number: 51254-07, Press capacity: 40 ton Daylight: 550 mm Fsln E Hgouqd Rloxsgb Stroke: 150 mm Ram speed down: 50 mm / sec Ram speed up: 85 mm / sec Throat depth: 250 mm Table surface area: 1.400 - 4.900 x 280 mm mm Table height over floor: 900 mm Oil volume: 250 l Driving motor: 5,5 kW Dimensions L x W x H: 1.400 x 1.800 x 2.400 mm Weight of machine approx.: 2.300 kg Standard configuration - Press uprights in C-frame design in rigid and low-stress welded construction with integrated straightening bed- Oil tank welded into the press upright- Oil level indicator- Filling and ventilation filter- Press cylinder made of high-quality steel with honed cylinder running surface- Hardened, ground and hard chrome-plated piston rod with anti-rotation lock- Piston with DIN 810 bore for tool attachment- Modern and maintenance-friendly block design of the hydraulic system- Safety valve to protect the hydraulic system against overload- Infinitely adjustable limitation of the downward stroke with fixed upper stroke limitation- Infinitely variable adjustment of the ram return stroke (return stroke limiter)- Directional stroke control for preselection and exact reproducibility of stroke depths- Sensitive and targeted adjustment of the straightening stroke depth over the entire stroke, even at full press force- Ergonomically designed hand lever with rotary handle as central operating element for ram movement, straightening stroke setting and straightening stroke adjustment- Numerical stroke depth display for controlled setting, repetition and adjustment of the straightening stroke depth Extended machine accessories - Total press bed extension: 3,500 mm- Extension right: 1 x 500 mm and 1 x 1,250 mm- Extension left: 1 x 500 mm and 1 x 1,250 mm- Number of supports: 2 each on the right and left- Workpiece holders for centers- Rotating center punch tips MK3- Pneumatic clamping of the right quill, actuation by manual valve- Spring package for workpiece holders, 2 each for load capacity up to 20 kg and 100 kg- Straightening hammer- Pressure pieces for straightening hammer- Straightening anvils, attached to the straightening carriage- Alignment anvils, can be moved to the rear while traveling- Supports for straightening anvil

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Fgjln E Hget Hwz Njxob Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Fjln E Houqd I Rogxogb Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton Standard configuration The press has a sideways extending table plate.

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t Fgoln Eot Hwxus Hgxeb dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Foln E Hgouqdxisxsgb Automation roll-off try with leveller

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm total power requirement 10 kW weight of the machine ca. 4.500 kg Fgjln E Het Hwwdogxob dimensions of the machine ca. m

Condition: used, Year of construction: 1986, Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Fgjlouqdqlon E Hgxeb Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW Fgsln E Hgjt Hwuisxeb weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1987, machine/vehicle number: 131 267, Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton Extended machine accessories Folnsuqdqfs E Hgxogb

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm Foln Est Hwrzo Hgxsgb stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Fgeln E Hsuqdi Uogxeb Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t Fslet Hwpyon E Hgxogb dimensions of the machine ca. m